• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.77-82
• /
• 2000

Parametric study fur the cooling characteristic investigation of a notebook PC mounted with heat spreader has been numerically performed. Two oases of air-blowing and air-exhaust at inlet were tested. The cooling effect on Parameters such an, velocities of air-blowing and air-exhaust, materials of heat spreader, and CPU powers were simulated for two cases. Cooling performance in the case of air-blowing was better than the case of air-exhaust.

• 대한기계학회논문집B
• /
• 제25권6호
• /
• pp.799-803
• /
• 2001

Miniature heat pipe(MHP) with woven-wired wick was used to cool the CPU of a notebook PC. The pipe with circular cross-section was pressed and bent for packaging the MHP into a notebook PC with very limited compact packaging space. A cross-sectional area of the pipe is reduced about 30% as the MHP with 4mm diameter is pressed to 2mm thickness. In the present study a performance test has been performed in order to review varying of operating performance according to pressed thickness variation and heat dissipation capacity of MHP cooling module that is packaged on a notebook PC. New wick type was considered for overcoming low heat transfer limit when MHP is pressed to thin-plate. The limiting thickness or pressing is shown to be within the range of 2mm∼2.5mm through the performance test with varying the pressing thickness. When the wall thickness of 0.4mm is reduced to 0.25mm for minimizing conductive thermal resistance through the wall of heat pipe, heat transfer limit and thermal resistance of MHP were improved about 10%. In the meantime, it is shown that the thermal resistance and heat transfer limit for the MHP with central wick type are higher than those of MHP with existing wick types. The results of performance test for MHP cooling modules with woven-wired wick to cool a notebook PC shows the stability as cooling system since T(sub)j(Temperature of Processor Junction) satisfy a demand condition of 0∼100$\^{C}$ under 11.5W of CPU heat.

• 대한기계학회논문집B
• /
• 제25권6호
• /
• pp.766-775
• /
• 2001

Parametric study to investigate the cooling performance of a notebook PC mounted with heat spreader has been numerically performed. Two cases of air-blowing and air-exhaust at inlet were tested. The cooling effect on parameters such as, inlet velocities in the cases of air-blowing and air-exhaust, materials of heat spreader, and CPU powers were simulated for two cases. Cooling performance in the case of air-blowing was better than the case of air-exhaust.

• 한국전기전자재료학회논문지
• /
• 제16권11호
• /
• pp.1047-1054
• /
• 2003

Smart battery pack (SBP) for notebook PCs was developed using a cylindrical-type lithium ion battery. Batteries were connected with three serial and two parallel, the nominal capacity and the maximum load of SBP was 4,000mAh and 4.0A, respectively. The SBP was composed of a protection IC, by which safety of lithium ion batteries is maintained against overcharge, overdischarge and overcurrent, and a smart IC, which calculates the remaining capacity and the remaining run time. In matching test on notebook PC using Battery Mark 4.0, real and smart data of END voltage coincided nearly and LB and LLB signal worked norma]]y. And there were errors of less than 1% between the real and the smart data on the residual capacity in the charge and discharge test.

• 전자진흥
• /
• 제11권7호
• /
• pp.40-48
• /
• 1991

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2008년도 춘계학술발표논문집
• /
• pp.365-368
• /
• 2008

일반적으로 6 시그마 적용사례는 제조분야 중심으로 연구 발표되는 경우가 많고, 판매나 마케팅 분야의 적용사례는 찾기 힘들실정이다. 본 논문에서는 S전자의 전문상가에서 판매되는 노트북의 판매비중을 높이기 위해 6 시그마를 적용하여 노트북의 판매비중을 높이기 위해 프로젝트를 진행하였다.

• 전자공학회논문지B
• /
• 제33B권11호
• /
• pp.97-105
• /
• 1996

This paper is a study on the implementation of speech recognition mobile robot to which the interactive speech recognition techniques is applied. The speech command uttered the sentential connected word and is asserted through the wireless mic system. This speech signal transferred LPC-cepstrum and shorttime energy which are computed from the received signal on the DSP board to notebook PC. In notebook PC, DP matching technique is used for recognizer and the recognition results are transferred to the motor control unit which output pulse signals corresponding to the recognized command and drive the stepping motor. Grammar network applied to reduce the recognition speed of the recogniger, so that real time recognition is realized. The misrecognized command is revised by interface revision through the conversation with mobile robot. Therefore, user can move the mobile robot to the direction which user wants.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 춘계학술대회 논문집
• /
• pp.905-910
• /
• 2006

• 한국콘텐츠학회논문지
• /
• 제12권11호
• /
• pp.49-57
• /
• 2012

최근 사용자 경험의 중요성이 강조되면서 사용자를 이해하기 위한 다양한 리서치 방법론들이 시도 되고 있다. 특히 그간의 통계적인 분석을 중심으로 하는 정량적 조사 방식의 사용자 이해 방법이 한계에 부딪히게 되면서 인문학적 또는 문화 인류학적인 방법론의 도입 시도들이 지속적으로 일어나고 있는 추세이다. 이런 노력의 일환으로 문화 인류학의 대표적인 리서치 방법론인 에스노그래피 형식의 다양한 접근 방법이 시도되고 있는데 그중 다이어리 스터디(Diary Study method)도 효과적인 방법론의 하나로 거론 되고 있다. 이에 본 논문은 다이어리 스터디 방법론을 노트북 PC의 번들 SW의 사용자 태도 조사에 응용하여 적용함으로서 사용자 태도에 대한 심층적 연구를 시도 하였다. 또한 노트북 PC의 번들 SW의 사용자 수용도를 파악하는 프로젝트를 중심으로 다이어리 스터디가 사용자 이해에 적용된 구체적인 예를 보여준다. 이 과정을 통해 에스노그래피 리서치 방법에 대한 개괄을 알아보고, 프로젝트에 다이어리 스터디를 적용 설계하여 사용자 성향을 분석 도출 하는 과정을 통한 효과적인 리서치 방법론을 논의 하고자 하였다. 이는 구체적인 사례를 통해 연구 방법론을 실제 적용함으로서 교과서적인 논의에서 벗어나 실제 적용측면에서의 논의를 진행 하고자 하는 목적으로 진행 되었다. 본 연구를 통해 사용자의 노트북 PC SW에 대한 적극적인 사용자화 과정을 확인 할 수 있었으며, 앞으로 번들 소프트웨어에 대한 배포 및 SW UX전략을 수립하는데 있어 활용 될 수 있을 것으로 기대 된다.

• 설비공학논문집
• /
• 제12권3호
• /
• pp.227-234
• /
• 2000

An experimental study was performed for understanding the limiting power and heat transfer characteristics of an MHP having the diameter of 3 or 4 mm which could be applied to cooling of miniature electronic equipment such as the notebook PC CPU etc. The experimental parameters which are inclination, structure of the wick, the length of the condenser and the total heat pipe were considered. The MHP with a woven-wired wick has the advantages of the improvement in capillary limit, the effective attachment tightly toward wall and the convenience in construction of wick. Cooling performance of the present MHP was compared with that of MHP with grooved, fine fiber and sintered type wick which were applied by existing enterprises. With respect to the inclination of$ -5^{\circ}$ , an MHP having the diameter of 3 or 4 mm shows the limiting power of 6~14 W. Therefore, it is expected that the MHP of the present study has sufficient applicability of cooling of notebook PC of which the amount of heat generated is about 12 W.