• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2005-2010
• /
• 2011

On AC railway systems, the neutral sections are installed in front of substations and sectioning posts in order to avoid crash between power that have differing phases. In case railway vehicles pass through these neutral sections, it is necessary for them to switch to coasting driving by notch-off. This may reduce speed of the vehicles, resulting lowered train operation efficiency. The usage of automatic power switching systems makes it possible to pass neutral sections at notch-on, enhancing operation efficiency so that it is appropriate for high-speed railway applications. This paper analyzed inrush current of main transformer that installed on the train while passing through the neutral section using the simulator.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1878-1884
• /
• 2010

Currently in Korea, neutral sections in front of substations and sectioning posts are greatly divided into AC/DC sections and AC/AC sections. Considering catenary damage and safety issues trains pass crossover by coasting driving at notch-off. However in cases of Japan, China, or Taiwan, the usage of automatic crossover system makes it possible to pass at notch-on, enhancing high-speed railway operation for efficiency, and stability. These are the purposes of developing automatic power crossover system in neutral sections. This paper introduces two methods to detect the position of a train required to activate automatic crossover systems in neutral sections. The optimal method is expected in terms of the distance of neutral section.

• 조명전기설비학회논문지
• /
• 제27권1호
• /
• pp.76-84
• /
• 2013

The renewable energy sources is raising for use of grid connected systems, for which higher power quality requirements are being issued. A grid connected converter requires a LC-filter stage, this one is lightly damped for efficiency constraints. Hence, it is subject to resonance if excited by the converter current harmonics or pre-exciting grid voltage harmonics. In this paper, an active damping technique employing notch filter for damping of the resonance frequency is introduced. This technique doesn't need to additional sensors. In addition, it is simple to apply for various systems. Monitoring of the resonance frequency ensures the stable operation of the proper connection and disconnection of the grid. This paper proposes the estimating method of a resonant frequency to determine the cut-off frequency of the notch filter. This method is validated by both simulation and experimental results.

• Steel and Composite Structures
• /
• 제29권2호
• /
• pp.187-200
• /
• 2018

This paper handles the repairing of deficient square Concrete-Filled Steel-Tube (CFST) beams subject to bending through an experimental and numerical program. Eight square-CFST beams were tested. A 5-mm artificial notch was induced at mid-span of seven beams, four of them were repaired by using CFRP sheets and two were repaired by using GFRP sheets. The beam deflection, strain and ultimate moments were recorded. It was found that providing different cut-off points for the different layers of FRP sheets prohibited failure at termination points due to stress concentrations. Using different lengths of FRP sheets around the notch retarded crack propagation and prevented FRP rupture at the crack position. Finite element analysis was then conducted and the proposed FE model was verified against the recorded experimental data. The influence of various parameters as FRP sheet length, tensile modulus and the number of layers were studied. The moment capacity of damaged square-CFST beams was improved up to 77.6% when repaired by using four layers of CFRP, however, this caused a dramatic decrease in beam deflection. U-wrapping of notched-CFST beam with 0.75 of its length provided a comparable behaviour as wrapping the full length of the beam.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제8권6호
• /
• pp.853-861
• /
• 2018

본 논문에서는 전기철도차량이 운행할 때 이상 전압상승에 의한 문제점을 해결할 수 있는 고조파 제한장치의 적용을 제안한다. 운행 중 열차에 전력을 공급하는 교류가선은 25kV/60Hz의 전기를 공급하기 위하여 사용되지만 철도차량 전기장치의 기술발전에 따라 점차 가선에 포함되는 고조파의 크기 및 주파수의 변형이 다양해지고 있다. 최근 열차안전운행에 심각한 문제가 되고 있는 주회로 기기인계기용변압기(Potential Transformer, PT)의 파손이나 주변압기 등의 열손증가는 가선 전원의 고조파로 인한 순간적인 무효전류의 증가로 생기는 현상이다. 주회로 기기의 저주파형 트랜스포머로 고주파수 성분이 유입되면 트랜스 코어의 히스테리시스에 의한 철손 증가 및 기생 커패시턴스에 흐르는 전류가 증가하므로 발열이 발생하게 된다. 이러한 문제 해결을 위해 최근 시퀀스의 조정으로 전력변환 장치의 인위적인 NOTCH OFF가 적용되었다. 그러나, OFF 신호를 받아 제어하는 방식은 지상과 차상 장치의 상호작용으로 동작하므로 불량 발생 시 무효화 되며, 실제 사고가 발생되고 있다. 따라서, 근본적인 문제해결을 위한 방법으로 고조파 전류가 가급적 변압기에 유입되지 않도록 하는 것이 필요하며, 고조파 전류의 유입으로 인해 빈번하게 발생되고 있는 열차사고를 방지하고 안전한 운행을 위해 열차의 실험 분석과 고조파 제한장치의 시뮬레이션을 통한 장치의 타당성 검증을 위한 연구를 수행하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.727-732
• /
• 1999

In this research, we made an experiment on the 10 specimen beams that we made. The specimen beams consist of 4 steel plate strengthening beams and 5 carbon fiber sheet strengthening beams. We applied the methods of notch, rounding off a edge, anchor bolt and side shear strengening to the steel plate and for the case of carbon fiber sheet, we applied the methods of anchor bolt, line anchor and shear strengthening. After all the cases were applied, the beams was measured and analyzed about the behavior property of strengthened beams, th ability of strengthening method, the relation between load and the shape of failure, the crack load, the yield load, the shape of crack pattern, the increasing rate from yield load and maximum load and the strain of rebar. All the strengthening methods resulted in almost same value until the yield load, and it wasn't quite different from the theoretical value. In comparison with existing method, the SER, SEAS for the steel plate and the CEA, CESS, CCESS for carbon fiber sheet showed the increasement of ductility with big displacement.

• 한국전자파학회논문지
• /
• 제25권1호
• /
• pp.70-75
• /
• 2014

본 논문에서는 데이터 통신 및 위치 인식이 가능한 IR-UWB(Impulse Radio Ultra-Wide Band) 송수신기 회로를 제안한다. UWB 수신기는 에너지 검출 방식의 OOK(On-Off Keying) 변조가 가능하도록 설계가 되었다. UWB pulse generator는 디지털 로직을 이용하여 설계되었으며, UWB 신호 송신시 발생할 수 있는 Side lobe를 제거하기 위한 가우시안 필터가 적용되었다. 측정된 수신기의 감도는 4 GHz 중심주파수와 1 Mbps PRF(Pulse Repetition Frequency)에서 -65 dBm으로 측정이 되었으며, 펄스당 에너지 효율은 20.6 pJ/bit로 측정되었다. 1.8 V 전원에서 DA를 포함한 전류 소모는 수신기과 송신기가 각각 27.5 mA와 25.5 mA이다.

• 한국유체기계학회 논문집
• /
• 제7권2호
• /
• pp.21-26
• /
• 2004

In this study the effects of fluid viscosity on the pump performances for a conventional centrifugal pump were experimentally investigated. The study aimed to compare the pump characteristics between water and viscosity fluids. In order to measure the flow rate and pressure, v-notch welt and bourdon pressure gauges were used for the codes of KS B6301 and KS B6302. The working fluids were water, aqueous sugar and glycerin solutions. The results were summarized as follows : The experimental results were summarized as follows : the pump characteristics of the total head, shaft power, and efficiency with high viscosity fluids were different from those of water. When the viscosity of the applied fluid was increased, the total head and efficiency were more decreased than those of water. The decreasing gradients of the total head and the efficiency were larger than water due to the increased disk friction losses at the duty operation point. However, the shut-off head was almost constant regardless the viscosity of applied fluids. Each efficiency curves for the sugar $20w\%$ and glycerin $20w\%$ solutions was decreased up to $15.1\%$ and $34.4\%$ than that of water, respectively.

• Animal cells and systems
• /
• 제6권1호
• /
• pp.65-68
• /
• 2002

Female genital morphology of Cryptocercus Kyebangensis is described, focusing on the structural features of ovipositors at each developmental stage. Ovipositor valves were the first genital structures to appear in female nymphs. The caudal margin of the 9th sternum was nearly straight in the 1st instars of both sexes, with a slight median notch, but was deeply concave in the female nymphs of the End instar. The 1st valve of ovipositor budded off from membranous fold between the 8th 8nd 9th sternum and a pair of the 2nd valve came from the 9th sternum. Separation of styli occurred in the female nymphs of the 8th or 9th instar. Some parts of the female genitalia were sclerotized after the final molt. Spermathecae were the fork type and leaned a little to the right in the middle line of the genital chamber from ventro-posterior view. The trace sealed with sclerite materials existed on the spermathecal opening. The genital segments (segments Ⅷ, IX, and X) were concealed completely by the 7th tergum and sternum posteriorly expanded. Terminal lobes which exist in the Blattidae were not observed in C. Kyebangensis. Instead, the apicolateral emargination existed on the terminal abdominal segment of C. Kyebangensis females.

• 화약ㆍ발파
• /
• 제34권3호
• /
• pp.1-9
• /
• 2016

성형폭약의 조절발파 효과를 확인하기 위하여 정밀폭약에 금속라이너의 재질과 두께를 달리하여 상대적으로 폭속이 작은 암석 절단용 성형폭약을 제작하였다. 성형폭약이 암반 내부에서 기폭될 때 방향성 절단을 유도하기 위하여 폭약 양쪽으로 금속라이너를 부착하였다. 또한 콘크리트 부재 실험을 통하여 성형폭약의 성능을 확인하였고 성형폭약과 공벽과의 적정 이격거리를 유지하기 위한 센터 가이더를 제작하였다. 실험결과 0.8mm 두께의 Fe 라이너가 장착된 성형폭약을 사용할 때 가장 깊은 노치가 형성되었고, 콘크리트 부재의 방향성 절단을 확인할 수 있었다.