• 대한기계학회논문집
• /
• 제8권2호
• /
• pp.127-132
• /
• 1984

본 연구에서는 상술한 점들을 고려하고 우선 다음과 같은 사항을 고찰하려고 노력하였다. 즉 슬롯 및 노치주위에는 어떤 응력들이 분포되며 응력분포거동은 어떤 인자에 의하여 좌우되는가, 어떤 응력이 응력집중을 지배하며 응력집중현상은 어떤 인 자에 의하여 좌우되는가를 주로 고찰하였다. 참고로 실험에서 노치 및 슬롯선단의 응력측정에는 실제로 기계나 구조물에 직접 사용할 수 있는 스트레인 게이지를 사용하 였고 측정치의 정도를 높이기 위하여 스트레인 게이지율 교정방법을 이용하였다. 참 고로 노치 및 슬롯주위에 발생하는 응력집중과 파괴거동과의 관계에 대해서는 다음에 보고하겠다.

• 한국산업정보학회논문지
• /
• 제18권1호
• /
• pp.11-17
• /
• 2013

A design method to achieve multiple band-rejection characteristics in a wideband circular slot antenna is presented. First, a wideband circular slot antenna fed by a coplanar waveguide is designed to operate in the frequency range between 2.3 and 11GHz, which covers WLAN, WiBro, WiMAX, and UWB frequency bands. Next, resonant frequency variations of rejection bands are examined with respect to different slot locations and lengths when slots are inserted on the ground conductor and the circular patch of the antenna. When arc-shaped slots are placed close to the circular transition from a feeding part, multiple notch bands are obtained. In this case, a half of the guided wavelength of the first notch band corresponds to the slot length and other notch bands are integer-multiple of the first band. Single notch band can be obtained when the slot is located off the transition part. Based on this study, a wideband circular slot antenna with five band-rejection frequency bands at 2.45, 3.5, 4.9, 7.35, and 9.8GHz is designed and fabricated. The first arc-shaped slots are located in the ground conductor close to the circular transition from a feeding part to generate notch bands at 2.45, 4.9, 7.35, and 9.8GHz, while the second slot for 3.73 GHz is placed on top side in the circular patch. The proposed design method is validated by good agreement between the simulated and measured results.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.205-210
• /
• 2005

In this paper, a planar half-circle shape ultra-wideband(UWB) antenna fed by CPW is designed, fabricated and measured for UWB communications. Within the UWB band(3.1 GHz $\sim$ 10.6 GHz), 5.15 GHz $\sim$ 5.825 GHz frequency band is used by IEEE 802.lla WLAN applications. It may be necessary to notch out this band to avoid interference with IEEE 802.lla WLAN. Therefore, we have proposed three kinds of UWB antennas having a notch function, such as a rectangular slot, a hat-shaped slot, a circle-shaped slot. The notch frequency of the proposed antenna can be adjusted by controlling the slot length or slot width. From the measured results, the proposed antennas show a good gain flatness except the IEEE 802.lla WLAN frequency band and have a reasonable agreement with simulated results.

• ETRI Journal
• /
• 제34권5호
• /
• pp.674-683
• /
• 2012

We propose a slot antenna consisting of a rectangular slot on the ground plane, fed by a microstrip line with a rectangular-ring-shaped tuning stub that can be deployed in ultra-wideband (UWB) communication systems to avoid interference with wireless local area network (WLAN) communication. Our antenna can achieve a single band-notched property from the 5 GHz frequency to the 6 GHz frequency owing to a controllable band notch that uses L- and J-shaped parasitic elements. The antenna characteristics can be modified to tune the band-notched property (4 GHz to 5 GHz or 6 GHz to 7 GHz) and the bandwidth of the band notch (1 GHz to 2 GHz). Furthermore, the shifted notch with enhanced width of the band notch from 1 GHz to 1.5 GHz is described in this paper. The UWB slot antenna and L- and J-shaped parasitic elements also provide the band-rejection function for reference in the WiMAX (3.5 GHz) and WLAN (5 GHz to 6 GHz) regions of the spectrum. Experiment results evidence the return loss performance, radiation patterns, and antenna gains at different operational frequencies.

• 디지털산업정보학회논문지
• /
• 제9권4호
• /
• pp.43-49
• /
• 2013

In this paper, it is designed inverted triangle structural planar monopole antenna with edge and rectangle slot for UWB(Ultra Wide Band) communication (3.1~10.6 GHz) and researched in about 5.8 GHz notch structure to prevent interference between UWB systems and existing wireless systems for using Wi-Fi service. The antenna have broadband property structurally through inverted triangle structural planar monopole which have edge. and rectangle form addition planned notch slot of 1 mm and height 0.1 mm. Monopole and ground of proposed antenna exist on coplanar plane, and excite as CPW. It used FR4 epoxy dielectric substrate of ${\varepsilon}r$=4.4, and the size is $20{\times}20{\times}1.6$ mm dimension. The measured results that are obtained return loss under -10 dB through 3.1~10.6 GHz(7.5 GHz) without Wi-Fi bandwidth and maximum gain of 8.44 dBi at E-plane. Radiation pattern is about the same that of dipole antenna at all frequency. And using notch slot and it will be able to confirm the quality which becomes notch from 5.8 GHz which are a radio LAN frequency range.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.44-46
• /
• 2008

This paper presented the notch effect of interior permanent magnet motor(IPM) with compound variable number of pole and slot. The selection of proper pole and slot which makes characteristic and efficiency of motor is very important on motor design. The motor which has 6pole and 9slot is at base. This paper is choose the 4pole 6slot motor which has 2:3 ratio then analyzed the characteristic.

• 한국전자파학회논문지
• /
• 제16권9호
• /
• pp.932-940
• /
• 2005

본 논문에서는 UWB 통신 시스템에서 사용될 수 있는 CPW 급전 구조를 이용한 평면형 반원 형태의 UWB 안테나를 설계, 제작 및 측정하였다. UWB 통신 주파수 대역(3.1 GHz${\~}$10.6 GHz) 내에 IEEE 802.1la(5.15 GHz${\~}$5.825GHz) WLAN 대역이 포함되어 있어 상호 간섭 문제가 발생할 수 있기 때문에 이 주파수 대역을 차단시킬 필요가 있다. 따라서 본 논문에서는 노치 기능을 갖는 세 종류의 rectangular 슬롯, hat-shaped 슬롯, circle- shaped 슬롯 UWB 안테나를 제안하였다. 제안한 안테나는 슬롯의 길이와 폭을 변화시켜 주파수 조정이 가능하다. 측정결과, IEEE 802.1la WLAN 대역을 제외한 나머지 대역에서는 무지향성을 갖는 평탄한 이득을 얻었으며, 시뮬레이션 결과도 잘 일치함을 확인하였다.

• 한국전자파학회논문지
• /
• 제16권9호
• /
• pp.941-948
• /
• 2005

본 논문에서는 반원 확장을 이용한 Ultra-Wideband(UWB)슬롯 놋치 안테나를 제안하였다. 제안된 안테나는 UWB 통신 주파수 대역인 3.1${\~}$10.6 GHz 대역을 만족했으며, IEEE 802.11a 주파수 대역인 5.15${\~}$5.825 GHz는 안테나 패치면에 형성한 $\lambda$/4 길이의 슬롯에 의해 필터링 되었다. 안테나는 유전율이 4.4이며 두께가 0.8 mm인 FR-4로 제작하였으며, VSWR 특성을 측정하였다. 슬롯의 길이 변화에 따른 놋치 특성을 측정하였으며, 경로 손실과 그룹딜레이를 측정하였다. 제안된 안테나는 IEEE 802.11a 주파수 대역을 제외하고는 평탄한 이득 변화량(1.9 dBi)을 나타내었다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권10호
• /
• pp.477-482
• /
• 2005

In this paper, detent force is minimized using notch and slot-aputure width adjustment in a slotted PMLSM. This time, the moving model node technique has used to reduce the time and the effort for calculation according to changing design parameters. As the result, the detent force of proposed model is decreased from 9.44[N] to 0.97[N] compare with it of basic model greatly. The thrust Is decreased 1.3[$\%$] from 342.07[N] to 337.48[N] a little. The notch is applied to PMLSM simply, the detent force is reduced greatly.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.132-133
• /
• 2006

Optimized choice of material for two principally different types of PM components is presented. The first is characterized by high stresses in areas with high stress concentrations (for example synchronizer hubs with very sharp notches, typically <0.25mm in the pre-synchronizer slot and the inner splines). The second type has slightly larger notch radii (small spur gears and sprockets with typically notch radii between 1- 3mm). Diffusion alloyed materials are well suited for sharp notch components. Pre-alloyed materials are also well suited for applications with sharp notches if compressive residual stresses in the notch roots are created by appropriate process control. A free choice of material is available for components with the larger notch radii.