• Computers and Concrete
• /
• v.8 no.4
• /
• pp.445-463
• /
• 2011

In the design of reinforced concrete (RC) beams, apart from providing adequate strength, it is also necessary to provide a minimum deformability even for beams not located in seismic regions. In most RC design codes, this is achieved by restricting the maximum tension steel ratio or neutral axis depth. However, this empirical deemed-to-satisfy method, which was developed based on beams made of normal-strength concrete (NSC) and normal-strength steel (NSS), would not provide a consistent deformability to beams made of high-strength concrete (HSC) and/or high-strength steel (HSS). More critically, HSC beams would have much lower deformability than that provided previously to NSC beams. To ensure that a consistent deformability is provided to all RC beams, it is proposed herein to set an absolute minimum rotation capacity to all RC beams in the design. Based on this requirement, the respective maximum limits of tension steel ratio and neutral axis depth for different concrete and steel yield strengths are derived based on a formula developed by the authors. Finally for incorporation into design codes, simplified guidelines for designing RC beams having the proposed minimum deformability are developed.

• Phonetics and Speech Sciences
• /
• v.1 no.4
• /
• pp.195-201
• /
• 2009

The purpose of this study was to use high-speed digital imaging (HSDI) to compare vocal vibratory behaviors of persons who stutter (PWS) and persons with muscle tension dysphonia (PMTD) for uttering the /i/ vowel in a bid to identify the characteristics of vocal fold vibratory behaviors of PWS. This study surveyed seven developmental PWSs and seven PMTDs. The findings of the study indicated the following: first, regarding the two groups' vocal fold vibratory behaviors, of seven PWSs, three were found to be close vocal tract (VC) and four were found to be combination vocal tract (VCB). Of the seven PMTDs, one was found to be VC, and the other six were found to be VCB. These results indicate that a voiceprint which is different from the open vocal tract (VO) found in normal groups in research conducted by Jung, et al. (2008b) appeared in both groups of this study. Even between the two groups, there is a difference in the voiceprint before vocalization. Second, a VKG analysis was conducted to identify the two groups' vocal cord contact quotient. As a result, the PWS group's vocal cord contact quotient changed gradually from an irregular one at the initial vocalization stage to a regular one. The PMTD group continued the tension at the initial vocalization. Putting together all of these results, there is a difference in vocal fold vibratory behaviors between PWSs and PMTDs when they speak. Thus, there was a difference in muscular tension between the two groups.

• The Journal of Korean Physical Therapy
• /
• v.21 no.2
• /
• pp.109-116
• /
• 2009

Purpose: $17\beta$-estradiol is the most active endogenous estrogen, which is related to favorable changes in the plasma lipid profile, to relaxation of the coronary vessels, and to a decrease in platelet aggregation and vascular smooth muscle cell migration. However, although the beneficial effect of estrogens on plasma lipoproteins (ie, lowering low-density lipoprotein and increasing high-density lipoprotein cholesterol) contributes to cardiovascular protection, it does not fully account for the protective effect, particularly in the application of physical therapy, including low frequency electrical stimulation. Methods: The aim of this study was to demonstrate the inhibition of stressors, such as endothelin-1 (ET-1), serotonin (5-hydroxytryptamine, 5-HT), prostaglandin $F2\alpha$ ($PGF2\alpha$), and a protein kinase C (PKC) activator 12-deoxyphorbol 13-isobutyrate (DPB), induced isometric tension by $17\beta$-estradiol in vascular smooth muscle strips, respectively. In addition, the effects of low frequency electrical stimulation at the meridian points (CV-3, -4, Ki-12, SP-6, LR-3, BL-25, -28, -32, -52) on the indirect antihypertensive effect were examined by monitoring the changes in the serum $17\beta$-estradiol concentration in healthy volunteers. Results: Isometric tension analysis showed that the responses of inhibited tension by $17\beta$-estradiol were similar to the same stressors in rat aortic smooth muscle strips. Furthermore, although the continued amplitude modulation (AM) type of electrical stimulation was not increased significantly by electrical stimulation, the current of the frequency modulation (FM) type of low frequency electrical stimulation increased the serum $17\beta$-estradiol concentration in normal volunteers. Conclusion: These results, in part, suggest that $17\beta$-estradiol has the capacity to supress stressor-induced muscle tension, and electrical stimulation, particularly current of the FM type, has a modulatory effect on the sex steroid hormones, particularly $17\beta$-estradiol, in healthy volunteers.

• Journal of Biomedical Engineering Research
• /
• v.20 no.2
• /
• pp.191-198
• /
• 1999

Biofeedback training is one of physiological self control methods for patients who has psychological problem and rehabilitational problem. It has been used to control blood pressure, heart rate, peripheral temperature, respiration, electromyography (ENG), and other biological signals-ENG, respiration, heat rate, peripheral temperature, skin conductance level-was developed in house. We applied this system to alcohol dependent patients to perform biofeedback training. In this experiment, the relaxation biofeedback training for alcohol dependent patient was carried out and the tension state for the change of biological signals were estimated using the fuzzy theory after relaxation biofeenback training. Eight alcohol dependent patients were agreed to participate in this experiment. Result showed that 1) the tension degree of patients were higher than the tension degree of normal subject. 2) The tension degree of patients were decreased as the training numbers were increased.

• Journal of International Academy of Physical Therapy Research
• /
• v.10 no.4
• /
• pp.1897-1902
• /
• 2019

Background: Tension-type headaches, which make up the highest proportion of headaches, are prone to develop into chronic tension-type headaches (CTTH). The characteristic of CTTH in patients is that the active myofascial trigger point (ATrP) which causes pain in the muscles of the back of the head is increased, compared to the normal headache and moves the head position forward. Objective: The aim of this study was to investigate the effects of myofascial release (MFR) and posture correction in effectively improving neck function and sleep quality in the symptoms of CTTH patients. Design: Observer-blind study Methods: To reduce ATrP, MFR was applied and exercise was also applied to correct posture. The subjects of this study were 48 individuals randomly divided into three groups; The MFR group using the MFR technique; The MFR with exercise group subject to both the MFR technique and forward head position correction exercises (MFREx), and the control group. MFR and MFREx groups were given the relevant interventions twice a week for four consecutive weeks, and went through the number ATrPs, range of motion (ROM) of neck, Neck Disability Index (NDI) and the Pittsburgh Sleep Quality Index (PSQI) before and after the intervention. A physical therapist, who was fully familiar with the measuring methods of the equipment, was the measurer and not aware of the target's condition was blinded to take measurements only before and after intervention. Results: There was a significant improvement in the ATrP, Neck ROM, NDI and PSQI in the group of patients to whom the MFR technique and MFREx were applied. MFREx was more effective in increasing neck mobility. Conclusions: According to this study, the application of MFR is effective in improving neck movement and sleep quality in chronic tension headache patients.

• Advances in concrete construction
• /
• v.11 no.4
• /
• pp.347-356
• /
• 2021

To address the limitation of the commonly used steam curing of reactive powder concrete (SC-RPC) in engineering, a preparation technology of normal curing reactive powder concrete (NC-RPC) is proposed. In this study, an experimental comparative research on the mechanical properties of NC-RPC and SC-RPC under uniaxial tension is conducted. Under the premise of giving full play to the ultra-high performance of RPC, the paper tries to explore whether normal curing can replace steam curing. The results show that various mechanical indexes of NC-RPC (e.g., tensile strength, ultimate tensile strain, elastic modulus and deformation performance) could basically reach the mechanical index values in steam curing at 28d age, some performance is even better at a longer age. So it affirms the feasibility of normal curing. In this paper, the influence of normal curing age on the tensile properties of RPC is discussed, and the relationship between each index and age is introduced in detail. Based on the experimental data, the tensile mechanism of RPC is analyzed theoretically, and two kinds of tensile constitutive models for RPC are proposed, one is curvilinear model, and another one is polygonal line model. The validity of the two models is further verified by the test results of others.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.2
• /
• pp.94-100
• /
• 2010

This study was performed to develop an LRFD (Load Resistance Factored Design) Code for Domestic Larch. To accomplish his, we evaluated bending, compression, tension and shear strength. The results of the strength evaluation were utilized to verify the distribution and code conversion. For bending, tension and compressive strength, the Weibull distribution was well-fitted, but for shear strength we observed a normal distribution. For evaluating the bending and compressive strength, a full-sized specimen was used. A small clear specimen was used to test tension and shear strength. Compressive strength in particular was found to be affected by tight knots, although there was little difference between grades. In the code conversion, the design value of the LRFD was larger than the existing allowable stress value in the Korean Building Code. However, the allowable stress in this study was about two times higher than the value listed in the Korean Building Code. This result induced the difference between the soft and hard conversions. For greater reliability, the accumulation of additional data is necessary and further studies should be performed

• Computers and Concrete
• /
• v.4 no.3
• /
• pp.187-206
• /
• 2007

A rational three-dimensional nonlinear finite element model is described and implemented for evaluating the behavior of high strength concrete slabs under transverse load. The concrete was idealized by using twenty-nodded isoparametric brick elements with embedded reinforcements. The concrete material modeling allows for normal (NSC) and high strength concrete (HSC), which was calibrated based on experimental data. The behavior of concrete in compression is simulated by an elastoplastic work-hardening model, and in tension a suitable post-cracking model based on tension stiffening and shear retention models are employed. The nonlinear equations have been solved using the incremental iterative technique based on the modified Newton-Raphson method. The FE formulation and material modeling is implemented into a finite element code in order to carry out the numerical study and to predict the behavior up to ultimate conditions of various slabs under transverse loads. The validity of the theoretical formulations and the program used was verified through comparison with available experimental data, and the agreement has proven to be very good. A parametric study has been also carried out to investigate the influence of different material and geometric properties on the behavior of HSC slabs. Influencing factors, such as concrete strength, steel ratio, aspect ratio, and support conditions on the load-deflection characteristics, concrete and steel stresses and strains were investigated.

• Computers and Concrete
• /
• v.8 no.1
• /
• pp.1-22
• /
• 2011

A numerical model that can simulate the nonlinear behavior of ultra high strength fiber-reinforced concrete (UHSFRC) structures subject to monotonic loadings is introduced. Since engineering material properties of UHSFRC are remarkably different from those of normal strength concrete and engineered cementitious composite, classification of the mechanical characteristics related to the biaxial behavior of UHSFRC, from the designation of the basic material properties such as the uniaxial stress-strain relationship of UHSFRC to consideration of the bond stress-slip between the reinforcement and surrounding concrete with fiber, is conducted in this paper in order to make possible accurate simulation of the cracking behavior in UHSFRC structures. Based on the concept of the equivalent uniaxial strain, constitutive relationships of UHSFRC are presented in the axes of orthotropy which coincide with the principal axes of the total strain and rotate according to the loading history. This paper introduces a criterion to simulate the tension-stiffening effect on the basis of the force equilibriums, compatibility conditions, and bond stress-slip relationship in an idealized axial member and its efficiency is validated by comparison with available experimental data. Finally, the applicability of the proposed numerical model is established through correlation studies between analytical and experimental results for idealized UHSFRC beams.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.13 no.2
• /
• pp.145-150
• /
• 2002

Background and Objectives : Patients with so-called 'functional voice disorders' who have structurally normal larynges and demonstrate muscle misuse in the larynx, and those with several interacting causes including habitual muscle tension, are probably better defined as having a 'muscle misuse voice disorder'. The purpose of this study was to analyze the voice and effectiveness of voice therapy in patients with functional voice disorders and to provide a guide for the treatment of functional voice disorder. Materials and Method : The records of 35 patients, presenting with functional voice disorder and receiving voice therapy during October, 2001 to September, 2002, were reviewed. Prior to voice therapy, the stroboscopic examination of their larynx, aerodynamic and acoustic analysis was done. The results of voice therapy were compared according to the patient's subjective, perceptual evaluation of voice, and maximal phonation time. Results : Patient's subjective, perceptual evaluation, and maximal phonation time showed superior results after voice therapy. Conclusion : The result of this study indicates that voice therapy is an effective treatment method of patients with functional voice disorder, especially muscular tension dysphonia.