• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.220-224
• /
• 1999

Sliding wear test was employed to determine the effect of whisker content and orientation on the firiction and wear behavior of SiC whisker reinforced alumina. Composites containing unidirectionally oriented whiskers were prepared by a modified tape casting followed by lamination, binder removal and hot pressing in order to align the whiskers in the tape casting direction. Wear coefficients on three directions were measured; parallel and normal to the tape casting direction on the tape casting surface and normal to lamination direction on surfnce normal to the tape casting direction. In the effect of whisker orientation, the highest wear rate was obtained in the direction parallel tape casting direction and the lowest in the direction normal to lamination direction at all temperatures. Silicon oxide layer amoothing the surface was detected by energy dispersive X-ray analysis on the worn surface.

• 대한수의학회지
• /
• 제47권2호
• /
• pp.247-254
• /
• 2007

This study was performed to identify the normal anatomic orientation of pulmonary arteries and to obtain the normal baseline parameters and the optimal contrast material delivery methods of computed tomographic pulmonary angiography (CTPA) on normal beagle dogs. Based on the contrast injection flow rate, the contrast volume, and the administration methods, the experimental groups were divided into 4 groups such as group 1 : 2 ml/s, 3 ml/kg, and monophasic administration; group 2 : 5 ml/s, 3 ml/kg, and monophasic administration; group 3 : 5 ml/s, 4 ml/kg, and monophasic administration; group 4 : 5 ml/s and 2 ml/kg in first phase, 0.3 ml/s and 2 ml/kg in second phase, as biphasic administration. Normal anatomic orientation of pulmonary arteries in CTPA was evaluated through reformatted and 3D images after retro-reconstruction. Normal parameters for great arteries and peripheral pulmonary arteries were obtained on the factor of basement hounsfield unit (HU) values, contrast enhanced HU values, delay time, and peak time. And the optimal contrast delivery methods were evaluated on the factor of contrast enhanced HU values, image quality, and artifact. The monophasic administration with 5 ml/s contrast injection flow rate and 3 ml/kg contrast volume was optimal in canine CTPA.

• 한국의류산업학회지
• /
• 제15권6호
• /
• pp.912-922
• /
• 2013

This study examined the differences in appearance orientation and appearance management behavior in groups (classified by the body mass index) as well as explored the differences in each of demographic variables. Data were collected from 513 respondents from the city of Daegu as well as Gyeongbuk province. Collected data were analyzed by descriptive statistics, ANOVA, and Duncan tests. The results showed that 14.3% of the respondents were underweight, 60.0% normal, and 25.7% overweight according to BMI. The appearance orientation of the respondents was revealed to be high. Skin care was the most popular appearance management behavior, followed by make-up, clothing selection, hair care and weight training. Due to appearance orientation by body type, the appearance orientation for the underweight was the highest followed by normal and overweight. There were significant differences in skin care, make-up, clothing selection, hair care among the three groups in appearance management behavior; however, no differences in weight training. Generally, appearance management behavior of the underweight was the highest, followed by the normal and the overweight. In addition, there were significant group differences in appearance orientation and appearance management behavior according to demographic variables. This study contributes basic information to the field of appearance management behavior research and beauty industry marketing strategy through a better understanding of the relationships of BMI, appearance orientation, and appearance management behavior.

• The Korean Journal of Ceramics
• /
• 제6권3호
• /
• pp.240-244
• /
• 2000

The three-dimensional orientation distribution function of a conical shaped tungsten liner prepared by the thermo-mechanical forming process was analyzed by 1.525$\AA$ neutrons to carry out the Rietveld refinement. The pole figure data of three reflections, (110)(220) and (211) were measured. The orientation distribution functions for the normal and radial directions were calculated by the WIMV method. The inverse pole figures of the normal and radial directions were obtained from their orientation distribution functions. The Rietveld refinement was performed with the RIETAN program that was slightly modified for the description of preferred orientation effect. We could successfully do the Rietveld refinement of the strongly textured tungsten liner by applying the pole density of each reflection obtained from the inverse pole figure to the calculated diffraction pattern. The correction method of preferred orientation effect based on the inverse pole figures showed a good improvement over the semi-empirical texture correction based on the direct usage of simple empirical functions.

• 한국의상디자인학회지
• /
• 제24권3호
• /
• pp.169-184
• /
• 2022

This study aims to discuss sustainable fashion trends and sustainable design directions that fashion companies are practicing with ESG in the post-corona new normal era. As a research method, this study examined sustainable fashion trends and ESG practices through empirical case studies focusing on each fashion brand's website, including previous research and literature research, using materials such as newspapers and magazines. As for ESG practice plans, they were divided into four categories: technology orientation, design orientation, consumption orientation, and social value pursuit orientation. The sustainable fashion trends were also divided into four categories. First, the trend exhibits cyclical sustainability using pro-environmental materials, such as pro-environmental fibers, recycled fibers, biodegradable fibers. Second, high sensitivity and rare value sustainability were shown using reuse and upcycling. Third, consumption-oriented trends were promoted through slow fashion. Fourth, in order to realize eco-friendly sustainable fashion and ESG as practical ways to pursue social values, there is a trend of integrating sustainability through changes in perception considering people, society, and the environment. Beyond spreading concern about value consumption trends and the environment, it presents a direction for future industries concerning core values with social roles, responsibility, and ethical awareness from various perspectives.

• 벤처창업연구
• /
• 제15권3호
• /
• pp.103-119
• /
• 2020

본 연구는 소기업 CEO를 대상으로 기업의 성과에 영향을 미치는 창업기업가의 내적역량인 역경지수, 기업가지향성, 고객지향성간의 관계를 분석함으로서 이론적, 실무적 시사점을 도출하고자 하였다. 기존의 국내 선행연구들처럼 내적역량을 기업성과에 대한 단일 차원의 함수관계로 분석하는데서 벗어나서, 창업기업가의 내적역량들 사이의 관계를 설명하려고 하였다. 역경지수를 독립변수, 기업가지향성을 매개변수, 고객지향성을 종속변수로 설정하여 실증분석을 하였다. 분석결과는 첫째, 역경지수의 하위요소인 통제력과 주인의식은 기업가지향성과 고객지향성에 정(+)의 영향을 미치는 것으로 나타났다. 둘째, 기업가지향성은 고객지향성에 정(+)의 영향을 미치는 것으로 나타났다. 셋째, 역경지수의 주인의식만이 기업가지향성의 매개를 통해 고객지향성에 정(+)의 영향을 미치는 것으로 나타났다. 즉, 창업가의 주인의식은 기업가지향성을 통해 고객지향성에 영향을 미치는 것으로 밝혀졌다. 한편, 역경지수의 하위요소인 지속성은 기업가지향성과 고객지향성에 유의한 영향을 미치지 않는 것으로 나타났다. 이는 급변하는 뉴노멀 시대에서 창업가의 지속성은 더 이상 기업가지향성과 고객지향성에 큰 영향을 미치지 못하는 것을 의미한다. 본 연구는 창업기업가의 역량 중에서 우선 개발해야하는 역량이 무엇이고 함께 개발되어야하는 성향이 무엇인지에 대한 시사점을 준다. 나아가 정책적으로 창업지원 프로그램 설계 및 투자자의 투자기준의 가이드라인 설계 시 도움이 될 수 있을 것이다.

• 한국측량학회지
• /
• 제25권5호
• /
• pp.375-381
• /
• 2007

본 논문에서는 3차원 점군, 3차원 벡터 또는 3차원 곡면에 영상등록하는 새로운 방법을 제안 하였다. 제안한 방법은 카메라 위치와 3차원 직선, 2차원 영상 직선을 각각 지나는 평면의 법선벡터의 일치화를 통하여 카메라 외부표정을 추정하는 것이다. 법선벡터 일치화의 조건은 각 법선벡터 쌍의 사잇각이 제로가 되는 것이다. 이 조건은 벡터내적인 수학식으로 표현 된다. 시뮬례이션을 통하여 제안한 방법이 영상등록을 위한 외부표정 추정을 강인하게 하는 것을 증명하였다.

• The Korean Journal of Ceramics
• /
• 제6권3호
• /
• pp.236-239
• /
• 2000

Both the X-ray diffraction data of the normal direction in the sample orientation and the pole figure data of three reflections, (111), (200) and (220), were used to do the Rietveld refinement for the copper sheet prepared by a cold rolling process. The agreement between calculated and observed patterns was not satisfactory, which was attributed to the preferred orientation effect of the copper sheet. The Rietveld refinement for the copper sheet could be done successfully by applying the pole density of each reflection obtained from the corresponding inverse pole figure to the X-ray diffraction data of the normal direction. The R-weighted pattern, $R_{wp}$ was 12.99% and the goodness-of-fit indicator, S, was 3.68.

• Journal of Ship and Ocean Technology
• /
• 제9권4호
• /
• pp.1-10
• /
• 2005

The effect of buoyancy orientation on turbulent channel flow has been investigated using DNS (direct numerical simulation). Grashof number is kept at 9.6 $\times 10^{5}$ while changing the orientation of the buoyancy vector to be parallel or perpendicular to the channel walls. Four study cases can be distinguished during this research namely; streamwise, wall-normal unstable stratification, wall-normal stable stratification and spanwise oriented buoyancy. The driving mean pressure gradient used in all cases is adjusted to keep mass flow rate constant while friction Reynolds number is around 150. At this Grashof number, the skin friction shows decrement in the unstable and stable stratification and increment in the other two cases. Analyses of the changes of flow structure for the four cases are presented highlighting on the mean quantities and second order statistics.

• 한국전기전자재료학회논문지
• /
• 제16권8호
• /
• pp.716-722
• /
• 2003

ZnO thin films were deposited on Al and Pt electrodes by an RF reactive sputtering system for the fabrication of FBAR (film bulk acoustic wave resonator), and the effect of thermal treatment temperature on their c-axis preferred orientation was investigated. SEM experiments show that columnar structure of ZnO thin films were grown with c-axis normal to electrode material, and XRD experiments show that both ZnO films were grown with (002) plane preferred orientation, but larger diffraction peak was observed with Pt electrode. The peak intensity increased with higher thermal treatment temperature, but c-axis preferred orientation was diminished. The surface roughness of Al thin film was higher than that of Pt, and these affect the surface roughness of ZnO film deposited on the electrode. Though the preferred orientation with respect to Pt(111) plane was improved with higher thermal treatment temperature, this could not improve the c-axis orientation of ZnO film.