• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.363-368
• /
• 1999

Multiseeding 방법을 사용하여 Y-Ba-Cu-0 초전도_ 시료를 제조하였다. Multiseeding은 여러개의 종자를 동시에 사용함으로써 단시간에 큰 size의 시료를 제조하고자 하는 의도에서 시도되었다. 또한 field-cooled 상태에서 포획 자기장의 크기를 측정함으로써 입자간 결합 상태와 시료의 품질을 평가하였다. 일반적인 방법으로 제조할 경우 포획 자기장 값은 입계를 지나면서 크게 감소하였는데, 이는 입계에 존재하는 잔류액상 및 미반응 211 입자 등에 기인한 결과이다. 입계를 따라 미반응상들이 잔류하는 현상을 억제하기 위해 본. 연구에서는 종자들간의 간격을 조절하였다. 그 결과 종자결정들간의 간격을 최대한 좁게 배열하였을 때 포획자기장의 크기가 입계에서 감소하지 않는 결과를 얻었다. 이와 같이 종자간의간격이 충분히 가까울 경우에는, 결정성장 초기에 두 입자가 하나로 결합될 수 있으므로 입계에 미반응 액상이 잔류하는 현상을 억제할수 있었던 것으로 생각된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1118-1125
• /
• 2005

In this study, seismic safety of CFRD(Concrete-Face Rockfill Dam) type "D" dam in operation is evaluated from the results of 1-g shaking table test using similitude laws. Model dam is made by similitude law considering the grain size of prototype dam component. After the model dam is impounded to the normal water level(N.W.L), it is excited by artificial earthquake wave corresponding to standard design respond spectrum of the "D" dam site. Displacement response behavior of the dam is examined through the measurement of vertical and horizontal displacement of dam crest. Also, amplification characteristics of acceleration with dam height is examined through the measurement of acceleration with dam height. Finally, the purpose of this study is to evaluate seismic safety of "D" dam in operation. From the results of acceleration measurement, it was found that acceleration of dam crest was amplified about 1.52 times compared to the acceleration of dam bottom and amplification phenomenon is outstanding at three quarters of dam height from the bottom of dam. From the analysis of displacement behavior, it was estimated that vertical displacement of prototype dam is 6.8cm (0.1% of dam height) and horizontal displacement 12.3cm(0.2% of dam height). These percentages is much lower than 1% of dam height(general stability criteria). Therefore, it was concluded that seismic stability of "D" dam against an estimated earthquake is guaranteed.

• 비파괴검사학회지
• /
• 제33권2호
• /
• pp.205-211
• /
• 2013

초음파 감쇠를 이용하여 티타늄 용접부에 대해 기계적 특성, 파단면 및 초음파특성을 연구하였다. 준비된 티타늄 시험편은 아르곤 가스를 이용하여 제작하였다. 티타늄 용접 시험편이 파단 되었을 때 변화하는 초음파 신호변화를 확인하기 위해서 인장시험을 실시하였다. 주사전자현미경을 이용하여 파단면을 관찰하고, 4 MHz 수직 탐촉자를 이용하여 초음파 시계열 신호를 획득하였다. 티타늄 판재에서 용접부는 모재부와 열영향부에 비하여 기계적 특성이 떨어지며 파단면분석을 통해 용접부의 입자크기가 모재부보다 큼을 확인할 수 있었다. RMS 신호 처리한 초음파 포락선의 면적과 인장강도의 상관관계를 나타내었다. 따라서 초음파를 이용하여 티타늄 용접부의 건전성 평가 방법이 유용함을 알 수 있었다.

• 한국세라믹학회지
• /
• 제41권3호
• /
• pp.183-189
• /
• 2004

음극전착법을 이용하여 전도성유리(ITO-glass)위에 Cu$_2$O 막을 제조하였다. Cu$_2$O 막의 특성을 향상시키기 위하여 전착방법, 시간, 전압, 전착 후 열처리 조건을 변화시켰다. 전착 후 열처리를 통해 얻어진 전극에 100mW/$ extrm{cm}^2$의 백색광을 조사하여 광전류밀도를 측정하고 XRD, SEM, UV-visible spectrophotometer를 통해 제조 조건변화에 따른 특성변화를 관찰하였다. 그리고 100mW/$\textrm{cm}^2$의 백색광하에서 bias 전압이 0V인 조건에서 전극의 안정성을 측정하였다 인가전압 -0.7V, 인가시간 300초 전착 조건에서 얻어진 막을 30$0^{\circ}C$에서 1시간 열처리하여 순수한 Cu$_2$O 막을 제조하였으며, 이 전극을 이용 광전류밀도를 측정한 결과 1048 $\mu$A/$\textrm{cm}^2$가 측정되었다. 또한 chemical deposition을 이용 TiO$_2$ 박막을 Cu$_2$O 막 위에 코팅하여 전극의 안정성을 향상시켰다.

• Journal of Nutrition and Health
• /
• 제32권3호
• /
• pp.296-306
• /
• 1999

This study was carried out to prepare a copper database of Korean foods which can be used in calculating copper intake from dietary data, and to evaluate the copper nutritional status of Koran adults living in rural areas by dietary intake and serum copper concentrations. A copper database for 1,176 Korean foods was constructed (1) by analysing 112 Korean foods which are frequently consumed by Korean adults living in rural areas, (2) by adapting values form food composition databases from other countries-320 items from the University of Minnesota database, 201 items from the USAD database, and 25 items from U.K. database, and (3) by imputing values from similar foods for 518 food items. Copper intake of 2,034 Korean adults over the age of 30 living in Yeonchongun was Kyunggi province, Korea was estimated by 24-hour recall method. Mean daily copper intake of subjects was 0.98mg. Mean daily intake level of males was 1.11mg which was significantly higher than that of females, 0.88mg. There was a significant difference in the distribution of subjects by the level of copper intake and sex(p<0.05). Mean serum copper concentration was 14.8umol/1 and the percentage of subjects with low, adequate, and high levels of copper concentration were 23.9%, 69.4%, and 6.6%, respectively. The two food groups which contributed most to the dietary copper intake of subjects were cereals and grain products, and vegetables, supplying 46.2% and 12.7% of total copper intake, respectively. Individuallym, rice contributed most, suppling 31% of total copper intake, followed by soybean curd, starch vermicle, barley, etc. Plant foods contributed to 82.1% of the total copper intake. In summary, results of this study show that copper intake of Korean adults living in rural areas is low, and that dietary sources of copper are mainly plant foods. Serum levels of copper in the subjects were relatively normal. The copper database for Korean foods constructed in present study will be a valuable tool for the as-yet limited assessment of copper intake of Koreans. Such studies will contribute to the establishment of a dietary of a dietary allowance of copper and the relationship of copper nutriture and chronic diseases in Koreans.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2002년도 추계공동학술대회논문집
• /
• pp.139-145
• /
• 2002

수로에서의 선박통항으로 인해 주변환경 렌 구조물에 미치는 영향을 평가하기 위하여 선박의 추진기로 인한 흐름을 다루었다. 제한수로에서의 수치모델은 Shield's diagram과 추진기의 운동량 이론을 사용하여 개발하였다. 프로펠러에 의한 추진기방정식은 분사를 정의하는 가장 정확한 수단으로 분사계수와 분사유속을 기초로 하여 수립하였다 추진기분사에 대해 접근한 방법은 적용 선박의 출력에 기초하였으며, 추진기 분사방정식의 주요함수에는 추진력, 프로펠러 직경, 그리고 선박의 속도를 도입하였다. 또한, 수로의 수심과 선박의 홀수도 초기이동한계입경의 계산에 필요하다. 추진기로부터 분사된 유속의 분포는 Gaussian 정규분포함수로 나타내었다 저면마찰속도와 진단응력은 Sternberg 공식으로부터 유도되었으며, 아울러 선박 추진기로 인해 수로저면에서 표사이동에 현저한 영향을 미치는 경우를 사례연구를 통해서 나타내었다.

• 한국작물학회지
• /
• 제47권
• /
• pp.107-123
• /
• 2002

This paper is intented to present a information of various aspects of quality related characteristics and standards for grades in maize. Maize is world's one of the three most popular cereal crops and a primary energy supplement and can contribute up to 30, 60, and 98% of the dairy diet's protein, net energy, and starch, respectively. Maize is also processed into industrial goods by wet or dry milling. Sweet corn is a leader among vegetable crops and its production for fresh or processing markets is a major industry in many countries. Over the years, the combined efforts of breeders and geneticists, biochemists, food scientists, and others have helped bring us to the point where we understand issues related to sweet corn quality. Traditional criteria for selecting corn hybrids have been based primarily on agronomic factors, including grain production, disease resistance, drought tolerance, and storage characteristics. Little emphasis has been placed on the quality and nutritional values of corn. Although there is widespread interest for value-enhanced corns have increased tremendously in the last five years, there is limited information available on the production and comparing the quality attributes of specialty grains with those of normal yellow dent corn. Most countries have developed national maize standards, aiming to provide a framework for trade, both internal and external. Where trading involves direct choice and price negotiation in front of the commodity, grading standards are rarely employed; quality is assessed visually and is influenced by end-use, and the price is determined more by local rather than national factors. The use of an agreed standard will provide an unambiguous description of the quality of the consignment and assist in the formation of a legally-binding contract. Standards can also be seen to protect consumers rights through setting limits to the amount of unsuitable or noxious material.

• 한국구조물진단유지관리공학회 논문집
• /
• 제9권3호
• /
• pp.169-177
• /
• 2005

본 연구는 환경 친화적 측면과 자원 재활용 측면에서 경남지역 연안에 다량 방치되고 있는 굴패각을 5.0mm이하의 크기로 분쇄한 후 잔골재 대체재로 사용해서 굴패각 콘크리트의 구조적 특성변화를 연구하여 굴패각 콘크리트의 실용성 제고를 위한 기초자료를 제공하고자 하였다. 이를 위한 기초적인 실험과 주요 변화 요인에 대한 실험을 통하여 굴패각 콘크리트의 시공성과 강도변화에 대해 집중 연구하였다. 실험결과 굴패각을 사용하여도 다른 재료와의 이상반응이나 새로운 물질 형성은 없었으며 이의 강도 또한 일반콘크리트 강도만큼 발현 가능하였다. 그리고 굴패각을 잔골재 대체재로서 우수한 입도크기는 5.0~3.0mm이며 잔골재 대체율의 정도는 약 30%까지 가능한 것으로 판단되었다. 또한 굴패각 콘크리트에서 인장 및 압축강도 상관관계식 ( )을 제시하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 추계 학술논문 발표대회
• /
• pp.17-20
• /
• 2005

This study investigates mock-up test of the concrete containing crushed sands with improved quality and following could be draws as conclusions. The slump satisfies the target value. The air content reaches the goal, however, it decreases by the occurrence of loss with elagse of age. In normal strength region, the setting time of CS24 member is shorter than that of SS24 member. In high strength region, the setting time of SS50 member is make only slower than that of CS5O because of the use of retarding AE agent. The compressive strength of the concrete using crushed sands is little higher than the concrete using washed sea sands, and the compressive strength of core sample increases at lower part. Drying shrinkage of the concrete using crushed sands is larger than that using washed sea sands. At water caring condition, both the concrete using crushed sands and using washed sands expand at first, exhibit to be swelled and with elagse of age, they remain relatirely constant. Also, the drying shrinkage occurred greatly when the width and thickness of a member are small because it is easy to evaporate the inner part vapor in the small width and thickness of a member. there can be little different according to the location of a contact gauge, however it is similar to the change of specimen's length change. The concrete using crushed sands, of which grading, grain shape and fine particle is improved, are comparable to the quality of the concrete using washed sea sand.

• Ocean and Polar Research
• /
• 제29권4호
• /
• pp.379-389
• /
• 2007

This paper presents an attempt to determine natural background levels of heavy metals which could be used for assessing heavy metal contamination. For this study, a large archive dataset of heavy metal concentration (Cu, Cr, Ni, Pb, Zn) for more than 900 surface sediment samples from various Korean coastal environments was newly compiled. These data were normalized for aluminum (grain-size normalizer) concentration to isolate natural factors from anthropogenic ones. The normalization was based on the hypothesis that heavy metal concentrations vary consistently with the concentration of aluminum, unless these metals are of anthropogenic origin. So, the samples (outliers) suspected of receivingany anthropogenic input were removed from regression to ascertain the "background" relationship between the metals and aluminum. Identification of these outliers was tested using a model of predicted limits at 95%. The process of testing for normality (Kolmogorov-Smirnov Test) and selection of outliers was iterated until a normal distribution was achieved. On the basis of the linear regression analysis of the large archive (please check) dataset, background levels, which are applicable to heavy metal assessment of Korean coastal sediments, were successfully developed for Cu, Cr, Ni, Zn. As an example, we tested the applicability of this baseline level for metal pollution assessment of Masan Bay sediments.