• 한방비만학회지
• /
• 제13권1호
• /
• pp.10-16
• /
• 2013

Objectives: This work aimed to investigate differentiations of Korean medicine's pathological symptoms and SF-12 sub scales among normal, overweight and obese subjects from multi-center case report. Methods: From 2009 to 2011 survey were carried out to 1,589 subjects who took treatment or were hospitalized in 7 Korean medicine hospitals and 3 Korean medicine clinic. Survey include Korean medicine's pathological symptoms and SF-12. Whole survey were obtained from subjects with interviewers. Obesity degree was divided into three groups by body mass index: Normal group is from 18.5 below 23, overweight from 23 below 25 and obese group is over 25. Chi-square test was performed to reveal differentiation response rate of pathologic symptoms among obesity groups. ANOVA test was carried out for compare each group's SF-12 sub scales. Results: Patients of overweight or obesity have more symptoms such as skin itching, swelling, weakness in lower legs, and feverish with swollen joints. Contrary, normal weight group responded symptoms of dry skin more than those of obese group. As a fatigue, obese group have more fatigue feeling at afternoon and evening, compared to high frequency response of normal weight groups' morning fatigue. Obese groups shows low physical scores of health related quality of life, in contrast, high mental scores of that. Conclusions: This is first work of pathologic symptoms shown by obese groups. This would contribute to standardization of Korean medicine's pattern identification as suggestion of classification point for obese groups.

• 대한수의학회지
• /
• 제13권1호
• /
• pp.79-83
• /
• 1973

Every month of pregnancy, vaginal smears were obtained from 42 dairy cows, and an attempt was made to correlate the cell picture with the stage of pregnancy. The results obtained in this work were summerized as follows: 1. At early pregnancy, most of the cells in the smears were the cells with normal nucleus and cytoplasm, and leucocytes. After the first month of pregnancy there was a progressive decrease in the rate of appearance of the cells with normal nucleus and cytoplasm, which dropped to the lowest value at the third month of pregnancy, thereafter, showing steady state. 2. After the first month of prgnancy the rate of appearance of the cells with karyolysis began to increase gradually, and reached a maximum at the fifth month of pregnancy, returning towards initial levels. 3. The rate of appearance of the cells with karyopyknosis was much lower at early pregnancy, but at the third month of pregnancy there was a rapid increase, thereafter, showing steady state (ranging from 20 to 50 percent). 4. The non-nucleated cornified cells, the cells with vacuolized cytoplasm, and the cells with swollen nucleus and cytoplasm were appeared much fewer or not, and significant changes were not recognized during pregnancy. 5. At early pregnancy there appeared many of leucocytes but dropped intensively at the third month of pregnancy, and, thereafter, appeared much fewer or not.

• 수산경영론집
• /
• 제27권1호
• /
• pp.15-45
• /
• 1996

The sustained economic growth cannot be expected without the balanced development in all the realms of industries. Korea has recorded the continuous high growth rate of economy, but it is now facing some difficulties in keeping the normal economic growth, because industrial workers do not like to work in some fields, the typical one of which is the fishery works. This thesis aims at studying the determinants of fishermen's job satisfaction(FJS) and the determinants of affecting the fishermen's trunover intention(FTI) to obtain and maintain the man power for fishing boats. This study assumes that the determinants which affact FJS are fishermen's work values, job characteristics, the attitude of accepting their fishery work, and that the determinants which affect FTI are FJS and their perceptions of labor market. This study concerns two kinds of Job satisfaction : one is an intrinsic satisfaction which comes directly from the work itself, and the other is an extrinsic satisfaction comes from the compensation for the work, but in this study “Pollnac's work satisfaction factor” is added as an additional determinant of FJS. There is a difference in job satisfactions between the individuals who have different work values. Some feel more satisfacttion than the others, which can be explained by the internal work values which assume the work is only a means for another objective of life. This study applies Hackman and 014ham's studies to the job characteristics that a worker's job satisfaction is positively related to the core job characteristis of the job. In addition, this study transformed their studies into variables. A job enrichment to reduce the simplicity of a work and make it more valueable can increase a job satisfaction, but an existing organization has limitation in redesigning the job for its enrichment. A reasonable answer about this matter can be obtained from the workers' subjective perceptins to highly regard the objective job characteristics. Worker's previews of fishery work also affect their job satisfaction because they are already informed of the details and charcteristics of the job that they have to carry out. A Job dissatisfaction causes their intention to leave jobs owing to general perceptions prevailing in labor markets.

• 한국환경과학회지
• /
• 제5권3호
• /
• pp.337-346
• /
• 1996

The purpose of this study was to provide basic data of the growth characteristics of the landscape trees for better landscape planting design, construction and maintenance through the prediction of landscape change as time passes fly the analysis of survival rate, distribution patterns & increment percent of tree height, width, stem diameter (breast or surface) of widely used six tree species in Seongnam-si Eunhang-jugong apartment housing areas (8 years have passed after landsape alanting work). The main results can be summarized as followed. The tree survival rate of Pinus parviflora was the highest rate 89.2% than any other species, but Acer buergerianum showed the lowest survival rate at that of it 35.0%, & that of Picea abies 70.5 %, Metasequoia glyptostroboides 71.6%, Maknolia denudata 38.9%, Acer paimatum was 71.7%, As a whole, the tree survival rate of coniferous trees were relatively high. The tree height increment percent of the deciduous species wert relatively high. And that of Metasequoia glyptostroboides was the highest rate 11.61% than any other species, but that of Magnolia denudata was the lowest rate 5.59% than any other species. According to this results, the increment percent of trees in this apartment areas were comparatively lower than that of each related species planted in nursery area. And this results would be considered when landscape experts do landscape planting design, construction & maintenance. The distribution patterns of present tree size showed a Normal Distribution like any other biological features.

• 한국분무공학회지
• /
• 제25권1호
• /
• pp.8-14
• /
• 2020

Recently, 1-D model-based engine development using virtual engine system is getting more attention than experimental-based engine development due to the advantages in time and cost. Injection rate profile is the one of the main parameters that determine the start and end of combustion. Therefore, it is essential to set up a sophisticated model to accurately predict the injection rate as starting point of virtual engine system. In this research, procedure of 1-D model setup based on AMESim is introduced to predict the dynamic behavior and injection rate of diesel injector. As a first step, detailed 3D cross-sectional drawing of the injector was achieved, which can be done with help of precision measurement system. Then an approximate AMESim model was provided based on the 3D drawing, which is composed of three part such as solenoid part, control chamber part and needle and nozzle orifice part. However, validation results in terms of total injection quantity showed some errors over the acceptable level. Therefore, experimental work including needle movement visualization, solenoid part analysis and flow characteristics of injector part was performed together to provide more accuracy of 1-D model. Finally, 1-D model with the accuracy of less than 10% of error compared with experimental result in terms of injection quantity and injection rate shape under normal temperature and single injection condition was established. Further work considering fuel temperature and multiple injection will be performed.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제11B권2호
• /
• pp.34-39
• /
• 2001

This paper described the forces analysis of a hybrid linear pulse motor (HLPM) with high accuracy and repeatability. The HLPM is fed from a phase current by microstepping drive. The finite element method (FEM) is employed for calculating the force. The forces between mover(forcer) and stator(platen) have been calculated using the virtual work method. The detent force, rate of tooth width to tooth pitch and magnetic saturation were analyzed to considered the distortion characteristics of static thrust. The thrust to displacement produced a high pulsating force while the normal force is much higher than the thrust force.

• 한국정밀공학회지
• /
• 제20권3호
• /
• pp.82-88
• /
• 2003

The nondestructive internal quality evaluation of agricultural products has been strongly required from the needs for individual inspection. Recently, the ultrasonic wave has been considered as a solution fur this problem, and an ultrasonic system was constructed for the ultrasonic NDE of fruits and vegetables in our previous work. In this paper, the practical applicability of our ultrasonic system is tested fur the inspection of internal defects (central cavity) in Atlantic potato. Sound speed and RMS of transmitted ultrasonic wave signal were measured and classification algorithm using 2 dimensional stochastic analysis. was presented. Experimental results showed greater value of sound speed and RMS (root mean square) of transmitted signal in normal samples than in abnormal samples with cavity. Also a stochastic method to distinguish normal and abnormal showed fault detection rate less than 5%.

• 한국환경과학회지
• /
• 제21권7호
• /
• pp.779-785
• /
• 2012

Several tests and experimental work have been done for identifying the best growth conditions and accumulated amount of lipid moiety in B. braunii, a microalga(UTEX 572) in terms of media composition. The specific growth rate was found to be the highest at 0.15 g/L-day when the phosphorus concentration was doubled with the other ingredients at the normal level. Experiments for varied media compositions revealed that the accumulation of lipid was the highest at 48% (dry cell weight based) in the nitrogen deficient medium and its corresponding specific growth rate was comparative to that in the normal BG 11 medium. In the bubble column experiments, carbon dioxide containing air produced four times more cell mass than air only. Light and glucose addition also enhanced cell mass with maximum, 1.8 g/L and accordingly 42% of lipid composition, which turned out to be a better strategy for higher lipid-producing microalgal culture.

• International Journal of Computer Science & Network Security
• /
• 제21권6호
• /
• pp.89-100
• /
• 2021

Smart Grid Network (SGN) is a next generation electrical power network which digitizes the power distribution grid and achieves smart, efficient, safe and secure operations of the electricity. The backbone of the SGN is information communication technology that enables the SGN to get full control of network station monitoring and analysis. In any network where communication is involved security is essential. It has been observed from several recent incidents that an adversary causes an interruption to the operation of the networks which lead to the electricity theft. In order to reduce the number of electricity theft cases, companies need to develop preventive and protective methods to minimize the losses from this issue. In this paper, we have introduced a machine learning based SVM method that detects malicious nodes in a smart grid network. The algorithm collects data (electricity consumption/electric bill) from the nodes and compares it with previously obtained data. Support Vector Machine (SVM) classifies nodes into Normal or malicious nodes giving the statues of 1 for normal nodes and status of -1 for malicious -abnormal-nodes. Once the malicious nodes have been detected, we have done a trust evaluation based on the nodes history and recorded data. In the simulation, we have observed that our detection rate is almost 98% where the false alarm rate is only 2%. Moreover, a Trust value of 50 was achieved. As a future work, countermeasures based on the trust value will be developed to solve the problem remotely.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.296-303
• /
• 2001

In nuclear power steam generators, high flow rates can induce vibration of the tubes resulting in fretting wear damage due to contacts between the tubes and their supports. In this paper the fretting wear tests and the sliding wear tests were performed using the steam generator tube materials of Inconel 690 against STS 304. Sliding tests with the pin-on-disk type tribometer were done under various applied loads and sliding speeds at air and water environment. Fretting tests were done under various vibrating amplitudes, applied normal loads and various temperatures. From the results of sliding and fretting wear tests, the wear of Inconel 690 can be predictable using the work rate model. Depending on normal loads and vibrating amplitudes, distinctively different wear mechanisms and often drastically different wear rates can occur. At room temperature, the wear coefficient K of Inconel 690 is 7.57${\times}$10$\^$13/Pa$\^$1/ in air and it is 1.93${\times}$10$\^$13/Pa$\^$1/ in water. At room temperature, it is found that the wear volume in air is more than in water. In water, the wear coefficient K at 50$^{\circ}C$ and 80$^{\circ}C$ is 4.35${\times}$10$\^$-13/Pa$^1$ and 5.81${\times}$10$\^$-13/Pa$^1$ respectively, Therefore, it is found that the wear volume extremely increases by increasing on temperature in water. This study shows that the dissolved oxygen with temperature increment increases and the wear due to fluidity is severe.