• Journal of Periodontal and Implant Science
• /
• 제24권1호
• /
• pp.178-184
• /
• 1994

This study was undertaken to examine the protein content of GCF and serum from noraml population in order to standardize the sample loading on SDS/PAGE gels. The resulats were as follows ; 1. The protein concentration of serum was not different between normal group and diseased group. 2. In GCF, the bands of lower molecular weight than albumin were heavily stained, but in serum, the protein bands of higher molecalar weight were found. 3. The profile of protein in normal GCF was characterized by heavily staining bands at 77, 66, 55, 26 KDa corresponding to the positions of transferrin, albumin, heavy and light chains of Ig G. Also 47, 37 KDa nonplasma proteins were found.

• 소성∙가공
• /
• 제9권6호
• /
• pp.590-597
• /
• 2000

A finite element formulation lot the simulation of axisymmetric sheet hydroforming is proposed, and an implicit program is coded. In order to describe normal anisotropy of steel sheet, Hill's non-quadratic yield function (Hill, 1979) is employed. Frictional contacts among sheet surface, rigid tool surface, and flexible hydrostatic pressure are considered using mesh normal vectors based on finite element of the sheet. Applied hydraulic pressure is also considered as a function of forming rate and time and treated as an external loading. The complete set of the governing relations comprising equilibrium and interfacial equations is approximately linearized for Newton-Raphson algorithm. In order to verify the validity of the developed finite element formulation, the axisymmetric bulge test is simulated. Simulation results are compared with other FEM results and experimental measurements and showed good agreements. In axisymmetric hydroforming processes of a disk cover, formability changes are observed according to the hydraulic pressure curve changes.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 가을 학술발표회 논문집
• /
• pp.87-92
• /
• 1991

It was achieved to formulate numerically the stress-strain relationship of concrete, which is a fundamemtal factor for the Elasto-Plastic analysis of concrete structures, for normal concrete by using random statistics. As a result of experiment, in the shape of stress-strain curves of normal concrete it has approach linear from first loading to peak point, and after that point deformation increased radically and specimens were brokendown abruptly. From the multiple linear regression, and obtained the exponential equaion for stress-strain relationship of concrete as follows: $\sigma$/$\sigma$max=e(1-$\varepsilon$/$\varepsilon$max)$\varepsilon$/$\varepsilon$max

• Nuclear Engineering and Technology
• /
• 제50권7호
• /
• pp.1131-1137
• /
• 2018

The effect of a serrated grain boundary on stress corrosion cracking (SCC) of Alloy 600 was investigated in terms of improvement of SCC resistance. Serrated grain boundaries and straight grain boundaries were obtained by controlled heat treatment. SCC cracks preferentially initiated and grew at grain boundaries normal to the tensile loading axis. Resolved tensile stress normal to the grain boundary was lower in serrated grain boundaries compared to straight grain boundaries. The specimen with serrated grain boundaries showed higher SCC resistance than that with straight grain boundaries due to a lower resolved tensile stress normal to the grain boundary.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.375-388
• /
• 2024

In this study, to evaluate the shock and vibration load characteristics of used fuel, a sea transportation test was conducted using simulated fuel assemblies under normal transport conditions. An overall test data analysis was performed based on the measured strain and acceleration data obtained from cruise, rotation, acceleration, braking, depth of water, and rolling tests. In addition, shock response spectrum and power spectral densities were obtained for each test case. Amplification and attenuation characteristics were investigated based on the load path. The load was amplified as it passed from the overpack to the simulated used fuel-assembly. As a result of the RMS trend analysis, the fuel-loading position of the transportation package affected the measured strain in the fuel rod, and the maximum strains were obtained at the spans with large spacing. However, even these maximum strains were very small compared to the fatigue strength and the cladding yield strength. Moreover, the fuel rods located on the side exhibited a larger strain value than those at the center.

• 대한핵의학회지
• /
• 제7권1호
• /
• pp.45-50
• /
• 1973

The changes of plasma renin activity, aldosterone concentration, serum sodium-, and potassium levels were studied before and after the water loading followed by diuretics injection. The materials were: 13 non-, 11 normal-, and 11 toxemic pregnancy cases. The plasma renin activity and aldosterone concentration of the cord and postpartum blood were also measured. Following were the results: 1. The plasma renin activity was elevated significantly in normal pregnancy, and slightly in toxemic pregnancy. The serum sodium levels were decreased in pregnancy. 2. The plasma aldosterone concentration was slightly decreased in normal pregnancy, and slightly increased in toxemic pregnancy, however, statistically insignificant. 3. The plasma renin activity of the cord and postpartum blood were lower than those of pregnancy cases. 4. The changes of plasma renin activity after the diuretic administration showed an initial increase, which recovered within 2 hours. These changes were the least in normal pregnancy, and the most in toxemic pregnancy. 5. The changes of plasma aldosterone concentration after the diuretic administration were similar to those of plasma renin activity, although the variations were not so wide.

• Computers and Concrete
• /
• 제29권2호
• /
• pp.81-92
• /
• 2022

The influence of normal stress perpendicular to the potential shear plane was always neglected in existing researches, which may lead to a serious deviation of the shear strength of concrete members in practice designs and numerical analyses. In this study, a series of experimental studies are carried out in this paper, which serves to investigate the shear behavior of concrete under compression shear loading. Based on the test results, a three-phase shear failure model for cohesive elements are developed, which is able to take into consideration the influence of normal stress on the shear strength of concrete. To identify the accuracy and applicability of the proposed model, numerical models of a double-noted concrete plate are developed and compared with experimental results. Results show that the proposed constitutive model is able to take into consideration the influence of normal stress on the shear strength of concrete materials, and is effective and accurate for describing the complex fracture of concrete, especially the failure modes under compression shear loadings.

• 한국건설순환자원학회논문집
• /
• 제11권3호
• /
• pp.177-183
• /
• 2023

유리섬유로 보강된 보강된 보의 경우 초기조건 및 보강형태에 따라 다양한 파괴모드가 발생한다. 본 연구에서는 콘크리트 탄성계수보다 약간 큰 유리섬유 보강재를 적용한 무근 콘크리트보의 파괴거동을 분석하였다. 실험을 위해 24 MPa 강도를 가지는 보를 제작하였으며, 초기 노치, 겹이음, 단부보강, 파이버 앵커 등의 영향을 분석하였다. 노치 및 노치부의 겹이음은 일반보강효과와 비슷한 하중증가를 나타내었는데, 이는 함침된 유리섬유의 에폭시가 노치 단면을 충분히 수복하기 때문이다. 보강하지 않은 기준기편에 비하여 초기 노치의 경우 0.78을, 보강한 경우는 4.43~5.61의 보강효과를 나타내었으며 휨파괴에서 시작되는 계면파괴가 지배적이었다. 높이의 1/3 이상의 단부 스트립과 파이버 앵커를 가진 경우 가장 이상적인 파괴거동(보강재 파단)을 나타내었는데, 일반 보강시편보다 150 % 이상의 파괴하중을 나타내었다.

• 대한안전경영과학회지
• /
• 제25권4호
• /
• pp.141-151
• /
• 2023

Recently, due to the expansion of the logistics industry, demand for logistics automation equipment is increasing. The modern logistics industry is a high-tech industry that combines various technologies. In general, as various technologies are grafted, the complexity of the system increases, and the occurrence rate of defects and failures also increases. As such, it is time for a predictive maintenance model specialized for logistics automation equipment. In this paper, in order to secure the operational safety and reliability of the parcel loading system, a predictive maintenance platform was implemented based on the Naive Bayes-LSTM(Long Short Term Memory) model. The predictive maintenance platform presented in this paper works by collecting data and receiving data based on a RabbitMQ, loading data in an InMemory method using a Redis, and managing snapshot DB in real time. Also, in this paper, as a verification of the Naive Bayes-LSTM predictive maintenance platform, the function of measuring the time for data collection/storage/processing and determining outliers/normal values was confirmed. The predictive maintenance platform can contribute to securing reliability and safety by identifying potential failures and defects that may occur in the operation of the parcel loading system in the future.

• Interaction and multiscale mechanics
• /
• 제1권2호
• /
• pp.279-301
• /
• 2008

This paper develops a 3D homogenization based continuum damage mechanics (HCDM) model for fiber reinforced composites undergoing micromechanical damage under monotonic and cyclic loading. Micromechanical damage in a representative volume element (RVE) of the material occurs by fiber-matrix interfacial debonding, which is incorporated in the model through a hysteretic bilinear cohesive zone model. The proposed model expresses a damage evolution surface in the strain space in the principal damage coordinate system or PDCS. PDCS enables the model to account for the effect of non-proportional load history. The loading/unloading criterion during cyclic loading is based on the scalar product of the strain increment and the normal to the damage surface in strain space. The material constitutive law involves a fourth order orthotropic tensor with stiffness characterized as a macroscopic internal variable. Three dimensional damage in composites is accounted for through functional forms of the fourth order damage tensor in terms of components of macroscopic strain and elastic stiffness tensors. The HCDM model parameters are calibrated from homogenization of micromechanical solutions of the RVE for a few representative strain histories. The proposed model is validated by comparing results of the HCDM model with pure micromechanical analysis results followed by homogenization. Finally, the potential of HCDM model as a design tool is demonstrated through macro-micro analysis of monotonic and cyclic damage progression in composite structures.