• 한국소음진동공학회논문집
• /
• 제15권9호
• /
• pp.1023-1029
• /
• 2005

In this paper, a dynamic model for the rotor shaft-coupling-blade system was developed. The blades are attached to a disk and driven by an electric motor shaft which is flexible in torsion. We assumed that the shaft torsional flexibility was lumped in the flexible coupling which is usually adopted in rotor systems. The Lagrangian approach with the small deformation theory for both blade-bending and shaft-torsional deformations was employed for developing the equation of the motion. The Assumed Modes Method was used for estimating the blade transverse deflection. The numerical results highlight the effects of both structural damping of the system and the torsional stiffness of the flexible coupling to the dynamic response of the blade. The results showed strong coupling between the blade bending and shaft torsional vibrations in the form of inertial nonlinearity, stiffness hardening and softening.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권3호
• /
• pp.144-148
• /
• 2001

For the purpose of developing capacitive humidity sensor having interdigit electrodes, interdigit electrode was modeled and simulated to obtain capacitance and sensitivity as a function of geometric parameters like the structural gap and thichness. For the development of ASIC, switched capacitor signal conditioning circuits for capacitive humidity sensor were designed and simulated by cadence using 0.25um CMOS process parameters. The signal conditioning circuits are composed of amplifier for voltage gain control, and clock generator for sensor driving and switch control The characteristics of the fabricated sensors are; 1) sensitivity is 9fF/%R.H., 2) temperature coefficient of offset(TCO) is 0.4%R.H./$^{\circ}C$, 3) nonlinearity is 1.2%FS, 4) hysteresis is 1.5%FS in humidity range of 3%R.H. ${\sim}$ 98%R.H.. The response time is 50 seconds in adsorption and 70 seconds in desorption. Fabricated process used in this capacitive humidity sensor having interdigit electrode are just as similar as conventional IC process technology. Therefore this can be easily mass produced with low cost, simple circuit and utilized in many applications for both industrial and environmental measurement and control system, such as monitoring system of environment, automobile, displayer, IC process room, and laboratory etc..

• Transactions on Electrical and Electronic Materials
• /
• 제7권3호
• /
• pp.123-128
• /
• 2006

The microstructure and electrical properties of the varistors, which are composed of $ZnO-Pr_6O_{11}-CoO-Cr_2O_3-La_2O_3-based$ ceramics, were investigated for different $La_2O_3$ contents. The increase of $La_2O_3$ content led to more densified ceramics, whereas abruptly decreased the nonlinear properties by incorporating beyond 1.0 mol%. The highest nonlinearity was obtained from 0.5 mol% $La_2O_3$, with the nonlinear coefficient of 81.6 and the leakage current of $0.2{\mu}A$. The increase of sintering time and temperature greatly decreased the nonlinear properties. As the $La_2O_3$ content increased, the donor density increased from $0.64\times10^{18}/cm^3\;to\;16.89\times10^{18}/cm^3$ and the barrier height greatly decreased with increasing $La_2O_3$ content, reaching a maximum (1.47 eV) in 0.5 mol% $La_2O_3$.

• Structural Engineering and Mechanics
• /
• 제73권5호
• /
• pp.565-584
• /
• 2020

The nonlinear thermo-electro-elastic buckling behavior of viscoelastic nanoplates under magnetic field is investigated based on nonlocal elasticity theory. Employing nonlinear strain-displacement relations, the geometrical nonlinearity is modeled while governing equations are derived through Hamilton's principle and they are solved applying semi-analytical generalized differential quadrature (GDQ) method. Eringen's nonlocal elasticity theory considers the effect of small size, which enables the present model to become effective in the analysis and design of nano-sensors and nano actuators. Based on Kelvin-Voigt model, the influence of the viscoelastic coefficient is also discussed. It is demonstrated that the GDQ method has high precision and computational efficiency in the buckling analysis of viscoelastic nanoplates. The good agreement between the results of this article and those available in literature validated the presented approach. The detailed mathematical derivations are presented and numerical investigations are performed while the emphasis is placed on investigating the effect of the several parameters such as electric voltage, small scale effects, elastomeric medium, magnetic field, temperature effects, the viscidity and aspect ratio of the nanoplate on its nonlinear buckling characteristics. It is explicitly shown that the thermo-electro-elastic nonlinear buckling behavior of viscoelastic nanoplates is significantly influenced by these effects. Numerical results are presented to serve as benchmarks for future analyses of viscoelastic nanoplates as fundamental elements in nanoelectromechanical systems.

• Computers and Concrete
• /
• 제2권5호
• /
• pp.389-409
• /
• 2005

The Finite Element Analysis (FEA) is evidently a powerful tool for the analysis of structural concrete having nonlinearity and brittle failure properties. However, the result of FEA of structural concrete is sensitive to two modeling factors: the shear transfer coefficient (STC) for an open concrete crack and force convergence tolerance value (CONVTOL). Very limited work has been done to find the optimal FE Modeling (FEM) methodologies for structural concrete members strengthened with externally bonded FRP sheets. A total of 22 experimental deep beams with or without FRP flexure or/and shear strengthening systems are analyzed by nonlinear FEA using ANAYS program. For each experimental beams, an FE model with a total of 16 cases of modeling factor combinations are developed and analyzed to find the optimal FEM methodology. Two elements the SHELL63 and SOLID46 representing the material properties of FRP laminate are investigated and compared. The results of this research suggest that the optimal combination of modeling factor is STC of 0.25 and CONVTOL of 0.2. A SOLID 46 element representing the FRP strengthening system leads to better results than a SHELL 63 element does.

• 로봇학회논문지
• /
• 제14권3호
• /
• pp.191-195
• /
• 2019

This paper presents a rope modeling and verification for the robotic platform of the wall cleaning robot (ROPE RIDE). ROPE RIDE has the characteristics of climbing up and down using a rope fixed on the roof like traditional workers. In order to perform a stable operation with a wall cleaning robot, it is necessary to estimate the position of the robot in a vertical direction. However, due to the high coefficient of extension and nonlinearity of the climbing rope, it is difficult to predict the behavior of the rope. Thus, in this paper, the mathematical modeling of the rope was carried out through the preliminary experiment. Extensive experiments using different types of rope were used to determine the parameters of the constitutive equation of climbing ropes. The validity of the determined parameters of various ropes was verified through the experiment results.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.521-529
• /
• 2019

Interlocked armor layers of unbonded flexible risers may crush when risers are being launched. In order to predict the behavior of interlocked armor layers, they are usually simplified as rings with geometric and contact nonlinearity ignored in the open-literature. However, the equivalent thickness of the interlocked armor layer has not been addressed yet. In the present paper, a geometric coefficient ${\gamma}$ is introduced to the equivalent stiffness method, and a linear relationship between ${\gamma}$ and geometric parameters of interlocked armor layers is validated by analytical and finite element models. Radial stiffness and equivalent thickness of interlocked armor layers are compared with experiments and different equivalent methods, which show that the present method has a higher accuracy. Furthermore, hoop stress distribution of interlocked armor layer under crushing is predicted, which indicates the interlocked armor layer can be divided into two compression and two expansion zones by four symmetrically distributed singular points.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제13권1호
• /
• pp.1-9
• /
• 2024

고분자 분야의 개발 및 양산과정에는 제어가 안되는 많은 변수가 있으며, 화학적 조성, 구조, 가공 조건 등 작은 변화에도 물성편차가 크게 발생하기에 보편적인 환경을 가정한 기존의 선형적 모델링 기법으로는 현장 데이터 적용시 많은 오차가 발생한다. 이에 본 연구에서는 최근 산업용 구동부품의 플라스틱 채용경향에 맞추어 엔지니어링 플라스틱인 Polyacetal 수지의 내마모성 및 내굴곡성 강화 연구에 다변량 분석기법인 구조방정식과 가우시안 프로세스 회귀를 결합한 모델링 방식(GPR-SEM)을 제안하고, 비선형성을 가지는 물질 모델링에 활용 가능성을 고찰하고자 한다.

• Steel and Composite Structures
• /
• 제50권2호
• /
• pp.149-158
• /
• 2024

Considering that different boundary conditions can have an important impact on structural vibration characteristics. In this paper, the nonlinear forced vibration behavior of functionally graded material (FGM) doubly curved shells with initial geometric imperfections under different boundary conditions is studied. Considering initial geometric imperfections and von Karman geometric nonlinearity, the nonlinear governing equations of FGM doubly curved shells are derived using Reissner's first order shear deformation (FOSD) theory. Three different boundary conditions of four edges simply supported (SSSS), four edges clamped (CCCC), clamped-clamped-simply-simply (CCSS) were studied, and a system of nonlinear ordinary differential equations was obtained with the help of Galerkin principle. The nonlinear forced vibration response of the FGM doubly curved shell is obtained by using the modified Lindstedt Poincare (MLP) method. The accuracy of this method was verified by comparing it with published literature. Finally, the effects of curvature ratio, power law index, void coefficient, prestress, and initial geometric imperfections on the resonance of FGM doubly curved shells under different boundary conditions are fully discussed. The relevant research results can provide certain guidance for the design and application of doubly curved shell.

• 대한기계학회논문집A
• /
• 제34권10호
• /
• pp.1427-1435
• /
• 2010

전통 판재이론을 이용하여 기하학적 비선형성을 갖는 판재의 휨해석을 위한 혼합형 유한요소모델을 구성 하였다. 혼합형 유한요소 모델의 구성에 포함되는 변형률과 합성력의 관계에 대한 적절한 가중함수를 찾기 위하여 라그랑지 승수법과 최소가상에너지 원리를 사용하였다. 각 요소별 유한요소 방정식의 계수행렬과 뉴턴 반복법 사용을 위한 접선 행렬에 대한 구체적 값을 제시하였다. 구성된 유한요소 해석모델의 선형 해에 대한 정확도 분석을 위하여, 여러 경계조건하에서의 수학적 해와 제시된 모델과 기존 모델의 유한요소해를 비교하여 현재 모델의 정확도의 향상을 확인하였다. 또한 수렴된 비선형해를 이용하여 제시된 모델의 경우, 각종 합성력들에 대한 요소 경계에서의 연속성이 기존의 모델의 합성력에 비해 개선됨을 제시하였다. 최종적으로 수렴한 비선형해에 대한 유효성을 보이기 위하여 기존 모델의 비선형 수렴해와 현재 모델의 비선형 수렴해를 비교하여 제시하였다.