• 한국정밀공학회지
• /
• 제14권5호
• /
• pp.108-117
• /
• 1997

To prove the stability and the effectiveness of the robust non-linear friction control suggested and proved analytically in the previous paper, the describing function analysis is introduced. The instability of the Southward's nonlinear friction compensation for a digital position control and the improvement of phase margin of the robust nonlinear friction compensation are verified qualitatively through the describing function analysis. Those controls are applied to a single-axis digital servo driving experimental setup which has inherent stick-slip friction and experimental results confirm the results obtained in and the effectiveness of the robust nonlinear friction compensation for a digital position control.

• 한국정밀공학회지
• /
• 제14권4호
• /
• pp.88-96
• /
• 1997

This paper suggests a new non-linear friction compensation for digital control systems. This control adopts a hysteresis nonlinear element which can introduce the phase lead of the control system to compensate the phase delay comes from the inherent time delay of a digital control. A proper Lyapunov function is selected and the Lyapunov direct method is used to prove the asymptotic stability of the suggested control.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.987-993
• /
• 1996

This report suggests a new non-linear friction compensation for digital control systems. This control adopts a hysteric nonlinear clement which can introduce the phase lead of the control system to compensate the phase delay comes from the inherent time delay of a digital control. The Lyapunov direct method is used to prove the asymtotic stability of the suggested control, and the stability and the effectiveness are verified analytically and experimentally on a single axis servo driving system.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권10호
• /
• pp.555-562
• /
• 2000

We propose an adaptive nonlinear control algorithm for compensation of the stick-slip friction in a dynamic system. The friction force and mass of the system are estimated and compensated by adaptive control law. Especially, as the nonlinear control input in a small tracking error zone is enlarged by the nonlinear function, the steady state error is significantly reduced. The proposed algorithm is a direct adaptive control method based on the Laypunov stability theory, and its convergence is guaranteed under the bounded noise or torque disturbance. We verified the performance of the proposed algorithm by computer simulation on one-DOF mechanical system with friction.

• 한국정밀공학회지
• /
• 제17권1호
• /
• pp.110-119
• /
• 2000

This paper presents simple and effective nonlinear friction compensation methods. When the direction of position command reverses, the integrator output of the PID controller does not change the sign of its output instantaneously, due to friction at zero velocity, i.e. stiction resulting tracking errors, that results in continuous push even though the command direction has been changed. To overcome this problem, we attempt to reverse the sign of the integrator output as the sign of velocity changes. The effectiveness of this approach is demonstrated by experiments on a 3-PRPS (Prismatic-Revolute-Prismatic-Shperical joints) in-parallel 6-D.O.F manipulator. The control strategy has been analyzed for stability. Also discussed are disturbance observer and velocity observer approaches for friction compensation.

• 대한기계학회논문집A
• /
• 제33권5호
• /
• pp.508-513
• /
• 2009

Friction is an important factor for precise position tracking control of servo systems. Servo systems with highly nonlinear friction are sensitive to the variation of operating condition. To overcome this problem, we use the LuGre friction model which can consider dynamic characteristics of friction. The LuGre friction model is used as a feed-forward compensator to improve tracking performance of servo systems. The parameters of the LuGre friction model are identified through experiments. The experimental result shows that the tracking performance of servo systems with higherly nonlinear friction can be improved by using feed-forward friction compensation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2551-2554
• /
• 2003

In this paper, we describe the nonlinear character for a friction control. The nonlinear character of friction control is inherent in mechanical system, which has gained more and more interest. The modeling and compensation of nonlinear friction are difficult tasks for precise motion control. This paper is performance evaluation of nonlinearities and mechanical compliance exists together with friction control system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.492-495
• /
• 1997

Integral type system is that a system is represented by a proper rational function. In this paper, novel control scheme based on model reference approach is proposed for integral type system. The proposed scheme compensates various undesirable effects of the system. In especially, the proposed scheme applied to DC servo control system, analyzed its control characteristic. Performances of the proposed system show excellent control characteristics; complete compensation of the undesirable nonlinear friction and load viscous, For proving realistic validities, LOS(Line Of Sight) stabilization system which has typically many nonlinear effects is experimented. After executing the computer simulation in "MATLAB", then the results are compared with the experiments. The results are very similar in theoretical study and the proposed control scheme is successfully verified. verified.

• 전력전자학회논문지
• /
• 제9권6호
• /
• pp.612-619
• /
• 2004

회전형 전동기와 볼스크류 및 타이밍 벨트를 이용한 서보 시스템은 NC, 가공기, 로봇 및 공장 자동화를 포함하여 산업 시스템 전반에 널리 사용되고 있다. 하지만, 동력의 전달에서 발생하는 비선형적인 마찰 및 댐핑현상은 제어 시스템 전체의 성능을 감소시키고, 특히 저속 정역 운전에서 그 영향이 크게 나타난다. 본 논문에서는 서보 제어시스템에서 발생하는 비선형적인 마찰 토크의 보상을 위해 가중치를 가지는 이중 제어 구조를 적용하였다. 본 논문에서 제안된 이중 제어 구조는 서보 제어 시스템에서 널리 사용되는 PI 속도 제어기 내부에 비선형적인 마찰 토크의 영향을 보상하는 내부 제어기를 가지는 구조이다. 특히, 내부의 제어기는 마찰 토크에 의한 시스템의 속도오차에 대하여 가중치를 가지는 구조로 설계되어 있고, 제어기의 이득은 외부 속도 제어기의 이득에 대하여 비례적으로 적용되므로, 안정성이 매우 높고 구조가 매우 간단하다. 본 논문에서 제안된 이중 제어 구조에 의한 비선형 마찰 토크 보상 방식은 시뮬레이션 및 실험을 통하여 그 성능을 검증한다.

• 한국공작기계학회논문집
• /
• 제12권6호
• /
• pp.77-83
• /
• 2003

This paper deals with a position control problem of a hydraulic proportional position control system using a nonlinear friction compensation control. As nonlinear friction, stiction and coulomb friction forces are considered and modeled as deadzone and external disturbance respectively. In order to compensate this nonlinearities, we designed the controller which is the adaptive friction compensator using discrete time Model Reference Adaptive Control method in this paper. Digital Signal Processing board is employed for data acquisition and manipulation. The experimental results show that response is slow and steady-state error cannot be compensated properly without friction compensation but this compensator is effective to obtain fast response and good steady-state response.