• Structural Engineering and Mechanics
• /
• 제5권3호
• /
• pp.329-338
• /
• 1997

In this paper a general analytical approach is proposed to analyse the nonlinear response of elastic cable under complex loads. The effect of temperature change on the cable is also considered. From the vertical equilibrium equations of cable, the general analytical formula of vertical displacement is derived. Based on the vertical displacement formula and on the compatibility condition of the cable, the dimensionless equation with respect to cable tension is established. By means of such analytical procedures, the exact solutions of various cable problems can be obtained quickly. The example given in this paper shows that the new procedure is efficient for practical analysis and can be easily implemented by a general computer program without the superposition problem which there has always been in traditional analytical methods.

• Structural Engineering and Mechanics
• /
• 제75권5호
• /
• pp.541-557
• /
• 2020

A novel family of controllable, dissipative structure-dependent integration methods is derived from an eigen-based theory, where the concept of the eigenmode can give a solid theoretical basis for the feasibility of this type of integration methods. In fact, the concepts of eigen-decomposition and modal superposition are involved in solving a multiple degree of freedom system. The total solution of a coupled equation of motion consists of each modal solution of the uncoupled equation of motion. Hence, an eigen-dependent integration method is proposed to solve each modal equation of motion and an approximate solution can be yielded via modal superposition with only the first few modes of interest for inertial problems. All the eigen-dependent integration methods combine to form a structure-dependent integration method. Some key assumptions and new techniques are combined to successfully develop this family of integration methods. In addition, this family of integration methods can be either explicitly or implicitly implemented. Except for stability property, both explicit and implicit implementations have almost the same numerical properties. An explicit implementation is more computationally efficient than for an implicit implementation since it can combine unconditional stability and explicit formulation simultaneously. As a result, an explicit implementation is preferred over an implicit implementation. This family of integration methods can have the same numerical properties as those of the WBZ-α method for linear elastic systems. Besides, its stability and accuracy performance for solving nonlinear systems is also almost the same as those of the WBZ-α method. It is evident from numerical experiments that an explicit implementation of this family of integration methods can save many computational efforts when compared to conventional implicit methods, such as the WBZ-α method.

• 한국지진공학회논문집
• /
• 제22권5호
• /
• pp.299-309
• /
• 2018

Now that problems with force-based seismic design have been clearly identified, design is inclined toward displacement-based methods. One such widely used method is Direct-Displacement-Based Design (DDBD). Yet, one of the shortcomings of DDBD is considering higher-mode amplification of story shear, moments, and displacements using equations obtained from limited parametric studies of regular planar frames. In this paper, a different approach to account for higher-mode effects is proposed. This approach determines the lateral secant stiffness of the building frames that fulfill the allowable inter-story drift without exceeding the desired story displacements. Using the stiffness, an elastic response spectrum analysis is carried out to determine elastic higher-mode force effects. These force effects are then combined with DDBD-obtained first-mode force effects using the appropriate modal superposition method so that design can be performed. The proposed design procedure is verified using Nonlinear Time History Analysis (NTHA) of twelve planar frames in four categories accounting for mass and stiffness irregularity along the height. In general, the NTHA response outputs compared well with the allowable limits of the performance objective. Thus, it fulfills the aim of minimizing the use of NTHA for planar frame buildings, thereby saving computational resources and effort.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권4호
• /
• pp.443-450
• /
• 2016

The linearization technique for low noise amplifier (LNA) has been implemented in standard $0.18-{\mu}m$ BiCMOS process. The MOS-BJT derivative superposition (MBDS) technique exploits a parallel LC tank in the emitter of bipolar transistor to reduce the second-order non-linear coefficient ($g_{m2}$) which limits the enhancement of linearity performance. Two feedback capacitances are used in parallel with the base-collector and gate-drain capacitances to adjust the phase of third-order non-linear coefficients of bipolar and MOS transistors to improve the linearity characteristics. The MBDS technique is also employed cascode configuration to further reduce the second-order nonlinear coefficient. The proposed LNA exhibits gain of 9.3 dB and noise figure (NF) of 2.3 dB at 2 GHz. The excellent IIP3 of 20 dBm and low-power power consumption of 5.14 mW at the power supply of 1 V are achieved. The input return loss ($S_{11}$) and output return loss ($S_{22}$) are kept below - 10 dB and -15 dB, respectively. The reverse isolation ($S_{12}$) is better than -50 dB.

• Wind and Structures
• /
• 제26권6호
• /
• pp.355-367
• /
• 2018

This paper studies the aerodynamic stability of a tensioned, geometrically nonlinear orthotropic membrane structure with hyperbolic paraboloid in sag direction. Considering flow separation, the wind field around membrane structure is simulated as the superposition of a uniform flow and a continuous vortex layer. By the potential flow theory in fluid mechanics and the thin airfoil theory in aerodynamics, aerodynamic pressure acting on membrane surface can be determined. And based on the large amplitude theory of membrane and D'Alembert's principle, interaction governing equations of wind-structure are established. Then, under the circumstance of single-mode response, the Bubnov-Galerkin approximate method is applied to transform the complicated interaction governing equations into a system of second-order nonlinear differential equation with constant coefficients. Through judging the frequency characteristic of the system characteristic equation, the critical velocity of divergence instability is determined. Different parameter analysis shows that the orthotropy, geometrical nonlinearity and scantling of structure is significant for preventing destructive aerodynamic instability in membrane structures. Compared to the model without considering flow separation, it's basically consistent about the divergence instability regularities in the flow separation model.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.297-303
• /
• 2001

This research presents an analytical model to characterize the ball bearing vibration due to the waviness in a rigid rotor supported by multi-row ball bearings considering centrifugal force and gyroscopic moment of ball. The effects of centrifugal force and gyroscopic moment are introduced to the kinematic constraints and force equilibrium equations. The waviness of ball and races is modeled by the superposition of sinusoidal function and it is introduced to position vectors of race curvature center to use the Hertzian contact theory in order to calculate the elastic deflection and nonlinear contact force resulting from the waviness while the rotor has translational and angular motion. They can be determined by solving the nonlinear equations of motion with five degrees of freedom by using the Runge-Kutta-Fehlberg algorithm. The accuracy of this research is validated by comparing with the results of the prior researches. It characterizes the vibration frequencies resulting from the various kinds of waviness in rolling elements, the harmonic frequencies resulting from the nonlinear load-deflection characteristics of ball bearing resulting from the waviness interaction.

• 한국해안해양공학회지
• /
• 제3권3호
• /
• pp.126-136
• /
• 1991

본 논문에서는 파랑하중을 받는 Guyed Tower의 비선형 동적거동에 대하여 연구하였다. Guyed Tower를 효율적으로 해석하기 위하여 Tower는 등가의 기둥으로 모형화 하였으며, 계유장치는 수평방향의 비선형 경계요소로 이상화하였다. 또한 파일 기초부는 회전방향의 선형경계요소로 대치하였다. Tower에 작용하는 파랑하중은 Morison 방정식에 의한 산정하였다. 계유장치와 유체의 점성에 기인된 항력 등의 비선형성을 적절히 고려하기 위하여 시간영역에서 해석을 수행하였으며, 비선형 운동방정식을 효율적으로 풀기 위해 Newmark 적분기법에 기초한 모우드 중첩법을 사용하였다. Guyed Tower의 중요한 설계변수인 계유선의 Clump weight 중량 조건과 파일 기초부 조건의 변화에 대한 수치해석을 수행하였다.

• 한국지진공학회논문집
• /
• 제1권4호
• /
• pp.1-9
• /
• 1997

본 논문은 고층건물의 지진응답해석에서 탄성 및 탄소성 응답스펙트럼 해석법에 대하여 고찰한 것이다. 선형 구조물의 지진응답 해석에 널리 사용되고 있는 응답스펙트럼법은 여러 연구자들에 의해 서로 다른 모드 조합방법으로 제안되었으며, 이들 조합방법에 따른 차이점을 상세히 검토하였다. 탄소성 지진응답해석에 응답스펙트럼법은 아직 널리 사용되고 있지 못한 실정이다. 본 연구에서는 장주기를 갖는 고층 건물의 탄소성 지진응답해석에 응답스펙트럼을 확장하여 적용하는 방법을 제시한다. 본 논문에서 제안한 탄소성 응답스펙트럼법을 이용하면, 고층건물의 예비 설계에서 시간이력해석 대신으로 보다 간편히 탄소성 응답치를 예측하는 도구로서 활용할 수 있을 것으로 사료된다.

• 융합신호처리학회논문지
• /
• 제23권1호
• /
• pp.15-20
• /
• 2022

최근 컴퓨터 성능 향상과 더불어 대규모 클러스터 서비스가 기존의 산업 및 연구기관뿐만 개인에게도 제공되고 있으며, 막대한 계산 성능을 이용한 공학 설계 활용은 빠르게 증가하고 있다. 이에 조선 해양 산업에서는 많은 계산 비용이 요구되는 전산유체역학 기법을 선박 및 해양구조물 설계에 활용하려는 노력이 증가하고 있다. 선박 및 해양구조물과 같은 부유체는 대양에서 해양파, 조류, 바람과 같은 환경 외란에 노출되어 있으며 이러한 환경 외란은 전산유체역학에서 고정도 모델링이 필요하다. 특히 해양파의 경우 비선형 전산유체역학의 특성상 기존의 선형 중첩법에서 벗어난 비선형 해양파가 고려되어야 한다. 본 연구에서는 이러한 비선형 해양파 수치 모사를 위해 고속 재현 기법을 제안하고 전산유체역학 기법을 활용하여 검증을 수행하였다.

• 한국해안해양공학회지
• /
• 제6권2호
• /
• pp.157-163
• /
• 1994

비선형 심해파의 전개과정을 통하여 그리고 어떤 특정한 위치에서 파속이 빠른 파가 느린 파를 추월하도록 하여 파의 중복을 유도함으로써 심해쇄파를 발생시키는 실험을 수행하였다. 2차원과 3차원적인 파랑의 불안정상태와 그로 인한 쇄파의 발생이 비선형 심해파의 전개과정에서 관찰되었고 또한 예상 쇄파지점에서 출 파고를 갖는 붕괴파(spilling waves)와 권파(plunging waves)를 관찰하였다. 비선형 심해파의 전개에서는 파랑이 거의 초기에너지를 가지고 전개하였으며 쇄파가 일어난 후에는 많은 에너지가 감소하는 것으로 나타났다. 붕괴파와 권파에서도 쇄파후의 에너지의 감소가 나타났지만 특히 격렬한 권파에서의 에너지감소가 두드러지게 관찰되었다.