• 한국항공우주학회지
• /
• 제33권5호
• /
• pp.28-33
• /
• 2005

이선형 플런지 스프링을 가지는 2차원 단면 익형 모델에 대하여 초음속 비선형 공탄성 해석을 수행하였다. 초음속 비정상 공기력 계산을 위해 DPM을 사용하였고 최소상태접근법을 사용하여 근사하였다. 비선형 플러터 해석을 위해 구조 비선형성을 비대칭 이선형 스프링으로 모델링하고 기술 함수 법을 사용하여 선형화하였다. 선형 및 비선형 플러터 해석 결과들은 공력탄성학적 특성들이 주파수 비에 중요한 영향을 받는다는 것을 보여준다. 비선형 플러터 해석으로부터 다양한 제한 주기 운동이 선형플러터 속도 이하 또는 이상에서 관측되었다. 또한 플러터 특성과 응답을 시간영역에서도 조사하였다.

• Wind and Structures
• /
• 제25권4호
• /
• pp.343-360
• /
• 2017

The post-flutter state of streamlined steel box girder is studied in this paper. Firstly, the nonlinear aerodynamic self-excited forces of the bridge deck cross section were investigated by CFD dynamic mesh technique and then the nonlinear flutter derivatives were identified on this basis. Secondly, based on the 2-degree-of-freedom (DOF) coupling flutter theory, the torsional amplitude and the nonlinear flutter derivatives were introduced into the traditional direct flutter calculation method, and the original program was improved to the "post-flutter state analysis program" so that it can predict not only the critical flutter velocity but also the movement of the girder in the post-flutter state. Finally, wind tunnel tests were set to verify the method proposed in this paper. The results show that the effect of vertical amplitude on the nonlinear flutter derivatives is negligible, but the torsional amplitude is not; with the increase of wind speed, the post-flutter state of streamlined steel box girder includes four stages, namely, "little amplitude zone", "step amplitude zone", "linearly growing amplitude zone" and "divergence zone"; damping ratio has limited effect on the critical flutter velocity and the steady state response in the post-flutter state; after flutter occurs, the vibration form is a single frequency vibration coupled with torsional and vertical DOF.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.253-256
• /
• 2005

Nonlinear aeroelastic analyses of composite wing with flap are performed considering free-play and dynamic stiffness of actuator. Doublet-Hybrid method is used for the calculation of subsonic unsteady aerodynamic forces. Free-play is modeled as an asymmetric bilinear spring and is linearized by using the describing function method. The linear and nonlinear flutter analyses show that the flutter characteristics are significantly dependent on the free-play and dynamic stiffness. From the nonlinear flutter analysis, various types of limit cycle oscillations are observed in a range of air speeds below or above the linear divergent flutter boundary.

• Wind and Structures
• /
• 제9권4호
• /
• pp.331-344
• /
• 2006

The cable-stayed-suspension hybrid bridge is a cooperative system developed from the traditional cable-stayed and suspension bridges, and takes some advantages of the two bridge systems. It is also becoming a competitive design alternative for some long and super long-span bridges. But due to its great flexibility, the flutter stability plays an important role in the design and construction of this bridge system. Considering the geometric nonlinearity of bridge structures and the effects of nonlinear wind-structure interaction, method and its solution procedure of three-dimensional nonlinear flutter stability analysis are firstly presented. Parametric analyses on the flutter stability of a cable-stayed-suspension hybrid bridge with main span of 1400 meters are then conducted by nonlinear flutter stability analysis, some design parameters that significantly influence the flutter stability are pointed out, and the favorable structural system of the bridge is also discussed based on the wind stability.

• Wind and Structures
• /
• 제6권4호
• /
• pp.279-290
• /
• 2003

Flutter stability is one of major concerns on the design of long-span cable-stayed bridges. Considering the geometric nonlinearity of cable-stayed bridges and the effects due to the nonlinear wind-structure interactions, a nonlinear method is proposed to analyze the flutter stability of cable-stayed bridges, and a computer program NFAB is also developed. Taking the Jingsha bridge over the Yangtze River as example, parametric analyses on flutter stability of the bridge are carried out, and some important design parameters that affect the flutter stability of cable-stayed bridges are pointed out.

• 한국항공우주학회지
• /
• 제33권2호
• /
• pp.54-59
• /
• 2005

구동기의 백래쉬와 동강성을 고려한 미사일 조종날개의 비선형 공탄성 해석이 수행되었다. 아음속 비정상 공기력 계산을 위해 DHM을 사용하였고 최소상태접근법을 사용하여 근사하였다. 비선형 플러터 해석을 위해 백래쉬는 유격으로 모델하고 기술 함수법을 사용하여 선형화하였다. 또한, 동강성은 주파수의 함수로 모터의 운동방정식으로부터 계산하였다. 선형 및 비선형 플러터 해석 결과들은 공력탄성학적 특성들이 백래쉬와 동강성에 중요한 영향을 받는다는 것을 보여준다. 비선형 플러터 해석에서 다양한 제한 주기 운동이 선형플러터 속도 이하에서 관측되었다. 또한 플러터 특성과 응답을 시간영역에서도 조사하였다.

• Journal of Mechanical Science and Technology
• /
• 제16권1호
• /
• pp.1-12
• /
• 2002

In this study, a passive suppression scheme for nonlinear flutter problem of composite panel, which is believed to be more reliable than the active control methods in practical operations, is proposed. This scheme utilizes a piezoelectric inductor-resistor series shunt circuit. The finite element equations of motion for an electromechanically coupled system is derived by applying the Hamilton\\`s principle. The aerodynamic theory adopted for the present study is based on the quasi-steady piston theory, and von-barman nonlinear strain-displacement relation is also applied. The passive suppression results for nonlinear panel flutter are obtained in the time domain using the Newmark-$\beta$ method. To achieve the best damping effect, optimal shape and location of fille piezoceramic (PZT) patches are determined by using genetic algorithms. The effects of passive suppression are investigated by employing in turn one shunt circuit and two independent shunt circuits. Feasibility studies show that two independent inductor-resistor shunt circuits suppresses flutter more effectively than a single shunt circuit. The results clearly demonstrate that the passive damping scheme that uses piezoelectric shunt circuit can effectively attenuate the flutter.

• 한국항공운항학회지
• /
• 제14권1호
• /
• pp.22-27
• /
• 2006

The linear and nonlinear aeroelastic analyses of a flat plate wing with flaperon have been performed by using frequency-domain and time-domain analyses. Natural modes from free vibration analysis and a doublet-hybrid method (DHM) are used for the computation of subsonic unsteady aerodynamic forces. The flaperon hinge is represented by a free-play spring and is linearized by the described function method. The linear and nonlinear flutter analyses indicate that flapping mode of the flaperon, the hinge stiffness and free-play of hinge have significant effects on the aeroelastic characteristics. From the nonlinear flutter analysis, different modes like stable and unstable limit-cycle-oscillation are observed in same flutter velocity depending on initial conditions.

• Advances in aircraft and spacecraft science
• /
• 제8권4호
• /
• pp.345-372
• /
• 2021

The analysis of nonlinear vibrations, buckling, post-buckling, flutter boundary determination and post-flutter behavior of a homogeneous curved plate assuming cylindrical bending is conducted in this article. Other assumptions include simply-supported boundary conditions, supersonic aerodynamic flow at the top of the plate, constant pressure conditions below the plate, non-viscous flow model (using first- and third-order piston theory), nonlinear structural model with large deformations, and application of mechanical and thermal loads on the curved plate. The analysis is performed with constant environmental indicators (flow density, heat, Reynolds number and Mach number). The material properties (i.e., coefficient of thermal expansion and modulus of elasticity) are temperature-dependent. The equations are derived using the principle of virtual displacement. Furthermore, based on the definitions of virtual work, the potential and kinetic energy of the final relations in the integral form, and the governing nonlinear differential equations are obtained after fractional integration. This problem is solved using two approaches. The frequency analysis and flutter are studied in the first approach by transferring the handle of ordinary differential equations to the state space, calculating the system Jacobin matrix and analyzing the eigenvalue to determine the instability conditions. The second approach discusses the nonlinear frequency analysis and nonlinear flutter using the semi-analytical solution of governing differential equations based on the weighted residual method. The partial differential equations are converted to ordinary differential equations, after which they are solved based on the Runge-Kutta fourth- and fifth-order methods. The comparison between the results of frequency and flutter analysis of curved plate is linearly and nonlinearly performed for the first time. The results show that the plate curvature has a profound impact on the instability boundary of the plate under supersonic aerodynamic loading. The flutter boundary decreases with growing thermal load and increases with growing curvature.

• Composites Research
• /
• 제20권1호
• /
• pp.8-14
• /
• 2007

플랩을 갖는 복합재 평판날개에 대해서 유격 비선형성과 구동장치의 동적 강성을 고려하여 비선형 공탄성 해석을 수행하였다. DHM 방법을 사용하여 아음속 비정상 공기력을 계산하였으며 유격은 기술함수를 적용하여 이선형 스프링으로 가정하였다. 동적 강성을 기어시스템의 지배방정식으로부터 계산하고, 적층각과 재질에 따른 공탄성 특성을 살펴보았다. 선형 및 비선형 공탄성 해석 결과들은 플러터 특성이 유격과 동강성에 따라 크게 달라지는 것을 보여주었다. 다양한 형태의 제한주기거동이 선형플러터 속도 이전과 이후에서 관찰되었다.