• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.70-72
• /
• 1998

Because of using PWM inverters and converters. The problems of insulation breakdown is emerging in both high voltage motors and general motors. In conventional methods, the viewpoint of surge problems is wave propagation with or without cable and inverter. For the purpose of knowing the situation of insulation breakdown, the end-turn coil of windings in the motor winding insulation structure is modelled by FEM, and field analysis of that is done. For first step, only end-turn coil is modelled and the model is simulated with FEM by approximating the resistivity of metallic foil surrounding insulation layers with having nonlinear property. Next, the result of simulation with nonlinear resistivity are compared with the result of linear resistivity. Because of microscope analysis, there is the problem of generalization but the situation of corona discharge in end-turn coil will be explained from this simulation.

• 한국가스학회지
• /
• 제6권4호
• /
• pp.47-52
• /
• 2002

멤브레인은 LNG온도에 따른 열수축과 팽창을 흡수하는 주름을 가지고 있는 스테인레스판으로 저장탱크 내부에 설치된다. 유한요소 해석법을 적용하여 LNG저장탱크용 멤브레인을 개발하였다. 액압 및 온도 하중 조건에 따른 멤브레인 주름부의 변형 거동 특성 및 강도 그리고 앵커 고정부의 반력을 구하였고 이 해석 데이터를 바탕으로 멤브레인의 안정성과 피로강도를 확인하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권10호
• /
• pp.523-529
• /
• 1999

In the case of the large power transformer, the grain-oriented material is usually used. So, to obtain more accurate results, anisotropy and non-linearity of the material must be considered. The Newton-Raphson(NR) method is generally used for analyzing these non-linear properties, but it consumes so much time, especially when the number of nodes is large or the shape of the model is complex. The transmission line modeling (TLM) method is successfully adopted to the analysis of non-linear properties with FEM, but it has not been adopted to the analysis of the anisotropic material. In this paper, the formulation of the TLM method considering anisotropy is developed and the adoption to the 3-phase transformer is presented.

• Wind and Structures
• /
• 제26권6호
• /
• pp.343-354
• /
• 2018

A realistic FEM structural model is developed to predict the behavior, load transfer, force distribution and performance of a riverine platform under earthquake and environmental loads. The interaction between the transfer plate and the piles supporting the platform is investigated. Transfer plate structures have the ability to redistribute the loads from the superstructure above to piles group below, to provide safe transits of loads to piles group and thus to the soil, without failure of soil or structural elements. The distribution of piles affects the distribution of stress on both soil and platform. A materially nonlinear earthquake response spectrum analysis was performed on this riverine platform subjected to earthquake and environmental loads. A fixed connection between the piles and the platform is better in the design of the piles and the prospect of piles collapse is low while a hinged connection makes the prospect of damage high because of the larger displacements. A fixed connection between the piles and the platform is the most demanding case in the design of the platform slab (transfer plate) because of the high stress values developed.

• Steel and Composite Structures
• /
• 제35권1호
• /
• pp.77-92
• /
• 2020

The present paper outlined a procedure for geometrically nonlinear dynamic analysis of functionally graded graphene platelets-reinforced (GPLR-FG) nanocomposite cylinder subjected to mechanical shock loading. The governing equation of motion for large deformation problems is derived using meshless local Petrov-Galerkin (MLPG) method based on total lagrangian approach. In the MLPG method, the radial point interpolation technique is employed to construct the shape functions. A micromechanical model based on the Halpin-Tsai model and rule of mixture is used for formulation the nonlinear functionally graded distribution of GPLs in polymer matrix of composites. Energy dissipation in analyses of the structure responding to dynamic loads is considered using the Rayleigh damping. The Newmark-Newton/Raphson method which is an incremental-iterative approach is implemented to solve the nonlinear dynamic equations. The results of the proposed method for homogenous material are compared with the finite element ones. A very good agreement is achieved between the MLPG and FEM with very fine meshing. In addition, the results have demonstrated that the MLPG method is more effective method compared with the FEM for very large deformation problems due to avoiding mesh distortion issues. Finally, the effect of GPLs distribution on strength, stiffness and dynamic characteristics of the cylinder are discussed in details. The obtained results show that the distribution of GPLs changed the mechanical properties, so a classification of different types and volume fraction exponent is established. Indeed by comparing the obtained results, the best compromise of nanocomposite cylinder is determined in terms of mechanical and dynamic properties for different load patterns. All these applications have shown that the present MLPG method is very effective for geometrically nonlinear analyses of GPLR-FG nanocomposite cylinder because of vanishing mesh distortion issue in large deformation problems. In addition, since in proposed method the distributed nodes are used for discretization the problem domain (rather than the meshing), modeling the functionally graded media yields to more accurate results.

• 한국지반공학회논문집
• /
• 제20권6호
• /
• pp.61-73
• /
• 2004

일반 자연 점토지반의 투수계수는 다양한 응력수준에 따라 비선형적인 특성을 보이며, 이러한 지반 투수계수의 비선형성은 상재하중 재하시 지반의 압밀시간 및 지반 변형 특성에 영향을 주게 된다. 따라서, 본 연구에서는 지반의 비선형 투수계수의 영향성을 고찰하기 위해 수정 Cam-clay 모델과 Biot의 압밀이론을 접목한 연립이론(Coupled theory)을 이용하여 FEM 수치해석을 실시하였다. 검토 결과 비선형 투수성은 비선형 특성을 나타내는 투수계수 변화비와 전체 간극비에 대한 평균 투수계수의 크기에 따라 지반 변형과 지중 과잉간극수압에 미치는 영향성이 상이하게 나타났다. 따라서, 보다 현장에 근접한 해석을 실시하기 위해서는 지반 투수계수의 변화비와 평균 투수계수의 크기에 따라 투수계수의 비선형 특성을 고려해야할 것인지를 판단해야 할 것이다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.341-348
• /
• 2001

In this study, nonlinear vibration analysis of the cylindrical orthotropic porous thin plate under V-shaped tension distribution with wire impact damping is considered. We make dynamic model of the plate under the tension using commercial FEM code and reduce the number of its degrees of freedom using dynamic condensation. The dynamic model of wire is obtained as lumped mass model from string equation. And then we analyze the nonlinear vibration of the plate including the impact phenomenon between the plate and the wire using the reduced mass and stiffness matrices of the plate and lumped model of the wire. The contact phenomenon between them can be described by impact contact elements composed of contact stiffness coefficients from Hertzian contact theory and contact damping coefficients from restitution coefficient between them. And we discussed the results of nonlinear vibration analysis for variations of their design parameters.

• 한국소음진동공학회논문집
• /
• 제12권8호
• /
• pp.639-647
• /
• 2002

The nonlinear vibration of the thin perforated plate is analyzed in consideration of the V-shaped tension distribution and the effect of wire impact damping. The reduced order FEM model of the tension plate is obtained from dynamic condensation for the mass and stiffness matrices. Tension wire is modeled using the lumped parameter method to effectively describe its contact interactions with the plate. The nonlinear contact-impact model is composed of spring and damper elements, of which parameters are determined from the Hertzian contact theory and the restitution coefficient, respectively. From the evaluation of the computational accuracy and computation time for the deduced impact stiffness and damping coefficient, we determined proper values for the simulation works, accounting for the computational accuracy as well as the computational efficiency. Finally we discussed the results of nonlinear nitration analysis for variations of their design parameters.

• 한국전산구조공학회논문집
• /
• 제28권5호
• /
• pp.467-475
• /
• 2015

본 논문에서는 구조물에 작용하는 하중의 크기와 진동수에 따른 거동의 비선형성을 확인하고 정확한 예측을 위한 방법을 모색하기 위하여 외팔보의 정적 및 동적해석의 수행에서 선형, 비선형 해석의 결과를 비교하는 연구를 진행하였다. 우선 보의 자유단에 수직방향의 정적 및 동적 하중을 가한 상황을 예측하였다. 선형 해석방법으로 고전 외팔보 이론을 적용하였고, co-rotational dynamic 유한요소해석 기법을 개발하여 비선형 해석방법으로 사용하였다. 먼저 정적해석에서 외력의 크기가 달라질 때 선형 및 비선형 해석 예측이 어떠한 차이를 보이는지 비교하였다. 그리고 동적해석을 통해 가진 진동수의 변화에 따른 보 끝단의 무차원화된 변위의 양상을 연구하였고, 공진진동수 근방에서의 상당한 변위가 발생함을 보였다. 마지막으로 주파수 지연현상을 조사하기 위해 특정 진동수에서의 시간 경과에 따른 보의 변위를 확인하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.67-74
• /
• 2001

In domestic, irregular walls such as T, L, H and Box shapes are considered as rectangular wall in the design of bearing wall apartment building. The strengths of walls, therefore, can be underestimated in case of using the current design process. Irregular walls are connected to each other as rigid joint so that part of the load can be resisted by the wall perpendicular to the load direction. This resistance can be caused by the effective width of perpendicular wall. This additional resistance by the perpendicular wall increases the strength of structural walls. The objective of this study is to evaluate the effective widths of flanged walls with different aspect ratios by using FEM analyses. the results from finite element method are compared with effective flange widths of some code provisions.