• 대한기계학회논문집A
• /
• 제27권2호
• /
• pp.247-254
• /
• 2003

The paper presents the influence of spring dynamics and friction on dynamic responses in a spring-driven cam system. The characteristics of the friction on the camshaft are analyzed using the nonlinear pendulum experiment while the parameters of the friction model are estimated using the optimization technique. The analysis reveals that the friction of the camshaft depends on stick-slip, Stribeck effect and viscous damping. Spring elements are found to have much influence on the dynamic characteristics. Hence, they are modeled as four-degree-of-freedom lumped masses with equivalent springs. The appropriateness of the derived friction model and spring model is verified by its application to a vacuum circuit breaker mechanism of the cam-follower type.

• 한국정밀공학회지
• /
• 제17권1호
• /
• pp.216-223
• /
• 2000

A robot arm with free joints has some advantages over conventional ones. A light weight and low power consumed arm can be made by a reduction of the number of joint actuators. And this arm can easily overcomes actuator failure due to unexpected accident. In general such underactuated arm does not have controllability because of the lack of joint actuators. The two-link arm with a free joint introduced in this paper is also uncontrollable in the sense of linear system theory. However, the linearized system sometimes can not represent the inherent dynamic behavior of the nonlinear system. In this paper the dynamic characteristics of the two-link arm with a free joint in view of global motion including damping and friction effect of the joints is investigated. In the case of considering only the damping effect, the controllable goal positions are confined to a specific trajectories. But in the case of considering the friction effect, the system can be controlled to arbitrary positions using the friction of the free joint as a holding brake. Also numerical example of position control is presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2555-2559
• /
• 2003

In this study, we develop an automatic sorting system, which is mostly affected by frictional forces between a veneer and friction-generating device. So we will make a suitable dynamic model and mechanism to control friction force using a AC servo-motor. We suggest Stick friction and Column friction model, which is occurred between roller and veneer and within veneers as well. A kind of sensor can get the velocity of roller and movement of roller vertical direction. We assume that the several things to simplify the complicate and difficult nonlinear friction phenomenon. And to create an optimal normal force, which can generate a suitable friction force, we control the movement of sorting roller and supporter as well. We introduce several results about a friction character and suggest the value of calibration of sorting roller movement and supporters as well.

• Earthquakes and Structures
• /
• 제12권1호
• /
• pp.135-144
• /
• 2017

Near-fault ground motions are characterized by high values of the ratio between the peak of vertical and horizontal ground accelerations, which can significantly affect the nonlinear response of a base-isolated structure. To check the effectiveness of different base-isolation systems for retrofitting a r.c. framed structure located in a near-fault area, a numerical investigation is carried out analyzing the nonlinear dynamic response of the fixed-base and isolated structures. For this purpose, a six-storey r.c. framed building is supposed to be retrofitted by insertion of an isolation system at the base for attaining performance levels imposed by current Italian code in a high-risk seismic zone. In particular, elastomeric (e.g., high-damping-laminated-rubber bearings, HDLRBs) and friction (e.g., steel-PTFE sliding bearings, SBs, or friction pendulum bearings, FPBs) isolators are considered, with reference to three cases of base isolation: HDLRBs acting alone (i.e., EBI structures); in-parallel combination of HDLRBs and SBs (i.e., EFBI structures); FPBs acting alone (i.e., FPBI structures). Different values of the stiffness ratio, defined as the ratio between the vertical and horizontal stiffnesses of the HDLRBs, sliding ratio, defined as the global sliding force divided by the maximum sliding force of the SBs, and in-plan distribution of friction coefficient for the FPs are investigated. The EBI, EFBI and FPBI base-isolation systems are designed assuming the same values of the fundamental vibration period and equivalent viscous damping ratio. The nonlinear dynamic analysis is carried out with reference to near-fault earthquakes, selected and scaled on the design hypotheses adopted for the test structures.

• 한국공작기계학회논문집
• /
• 제18권1호
• /
• pp.90-102
• /
• 2009

In this paper, a tracking control problem for a mechanical servo system with nonlinear dynamic friction is treated. The nonlinear friction model contains directly immeasurable friction state and the uncertainty caused by incomplete modeling and variations of its parameter. In order to provide the efficient solution to these control problems, we propose a hybrid control scheme, which consists of a robust friction state observer, a RFNN estimator and an approximation error estimator with sliding mode control. A sliding mode controller and a robust friction state observer is firstly designed to estimate the unknown infernal state of the LuGre friction model. Next, a RFNN estimator is introduced to approximate the unknown lumped friction uncertainty. Finally, an adaptive approximation error estimator is designed to compensate the approximation error of the RFNN estimator. Some simulations and experiments on the mechanical servo system composed of ball-screw and DC servo motor are presented. Results demonstrate the remarkable performance of the proposed control scheme.

• 대한기계학회논문집A
• /
• 제33권12호
• /
• pp.1417-1426
• /
• 2009

Various types of damper are usually applied to reduce noise and vibration for mechanical systems. Especially, for washing machines, the free-friction stroke damper is installed. The behavior of the free-friction stroke damper has nonlinear characteristics such as hysteresis and viscoelastic properties because of its foam material. First of all, the dynamic experiments were carried out by using a MTS machine to find characteristics of the free-friction stroke damper. And the simulation model of the free-friction stroke damper and characteristics of a foam material were evaluated by using optimization technique. To make a good simulation model which can show the dynamic characteristics, it is important to understand the working mechanism of the damper. The Finite Element Method (FEM) technique can help us instinctively understand the damping phenomenon under operating conditions, because we can observe the condition of damper at every step in the simulation by using it. Also, by changing factors, we can comprehend the variation of characteristics of damper. So, in this paper, a study on the dynamic characteristics of free-friction stroke damper by FEM is focused on. Finally, the possibility which physical experiments can be replaced into simulations is shown.

• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.163-170
• /
• 2002

The dynamic model of a high-speed vacuum circuit breaker mechanism with spring-actuated cam and linkage is derived to simulate the high-speed closing and opening operations. Its validation for an analysis of high-speed motion behavior is checked through experiments. The characteristics of the friction on the camshaft are investigated using the nonlinear pendulum experiment. The parameters of the friction model are estimated using the optimization technique. The analysis exhibits that the friction of the pendulum depends on stick-slip, Stribeck effect and viscous damping. Comparing simulation results with actual responses using a high-speed camera, the appropriateness of derived dynamic models for the rapid closing and opening operations is shown. The spring motion, which has much influence on the closing responses, is observed.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 추계학술대회 논문집(제1권)
• /
• pp.405-413
• /
• 2006

본 논문에서는 비선형 동적 마찰 성분을 효과적으로 보상하고 적응적으로 제어함으로써 차세대 항만 자동화 이송시스템으로 주목받고 있는 LMTT(linear motor-based transfer technology)의 위치 정밀도를 향상시키는 것을 목적으로 하고 있다. 셔틀카(shuttle car)와 컨테이너들의 다양한 중량과, 이로 인해 발생하는 동적 마찰 특성 파라미터들을 정확하게 추정할 수 있는 관측기를 설계하였다. 적응 backstepping 제어 기법을 적용하여 시스템이 안정하게 제어될 수 있도록 하는 제어기를 설계하였다. 시스템은 변화하는 환경에 대하여 높은 적응성을 가질 수 있어 여러 종류의 부하는 물론 마찰 특성의 변화에도 양호한 제어 특성을 유지할 수 있었다. 제안한 제어시스템의 타당성을 보여주기 위해 축소된 형태의 LMTT 시뮬레이터를 제작하여, 이에 대해 시뮬레이션과 실험만을 수행하여 제안하는 방법의 타당성과 실현성을 입증하고자 하였다.

• 한국항해항만학회지
• /
• 제31권1호
• /
• pp.55-64
• /
• 2007

일반적으로 서보 제어 시스템에서 비선형 동적 특성을 갖는 마찰력은 제어기 성능에 악영향을 미친다. 특히, 선형으로 고려된 시스템에 제어기 이득을 잘 설계한다 하더라도 마찰 현상에 포함된 동적으로 변화하는 dead zone에 의한 정상상태 오차 및 리미트 사이클(limit Cycle) 등을 야기한다. 따라서, 본 논문에서는 비선형 동적 마찰 성분을 효과적으로 보상하고 적응적으로 제어함으로써 차세대 항만 자동화 이송시스템으로 주목받고 있는 LMTT(linear motor-based transfer technology) 시스템의 위치 정밀도를 향상시키는 것을 목적으로 하고 있다. 본 제어대상은 셔틀카(shuttle car)와 컨테이너들의 다양한 중량과, 이로 인해 발생하는 동적 마찰 특성 파라미터들의 변화가 발생하므로 마찰력 내부 파라미터들의 추정이 요구된다. 제안하는 방법은 적응 backstepping 제어 기법으로 시스템이 안정하게 제어될 수 있는 조건으로 내부 파라미터 추정기를 설계하여 비선형 동적 마찰력을 보상하도록 하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1966-1971
• /
• 2005

Though several previous anti-windup techniques have been proposed, they are limited to linear systems or friction is not considered. Thus this paper proposes a compensation scheme for input-constrained robot systems with friction to cope with the windup phenomenon and shows its effectiveness by simulations. Given a feedback linearizing controller for a robot system designed without considering its input constraint, an additional dynamic compensator is proposed to account for the constraint. The dynamic anti-windup is based on the minimization of a reasonable performance index, and properties of the resulting closed-loop are presented.