• Journal of Ocean Engineering and Technology
• /
• v.18 no.2
• /
• pp.1-9
• /
• 2004

As the first step to investigate the nonlinear interactions between turbulence and marine structures inside a viscous NWT, a LES technique was applied to solve the turbulent channel flow for =150. The employed turbulence models included 4 types: the Smagorinsky model, the Dynamic SGS model, the Structure Function model, and the Generalized Normal Stress model. The simulated data in time-series for the LESs were averaged in both time and space, and statistical analyses were performed. The results of the LESs were compared with those of a DNS, developed in the present study and two spectral methods by Yoon et al.(2003) and Kim et a1.(1987). Based on this research, the accuracy of LESs has been found to be still related to the number of grids for fine grid size).

• Journal of the Korea Computer Industry Society
• /
• v.9 no.2
• /
• pp.77-82
• /
• 2008

The diversity reception and the equal gain combining technique are applied to the compensation of the distortion of channel, which occurs in transmission of data at rapid speed. DSSS BPSK system which has the receiving structure with the compensation algorithm is formed on the diversity branch, and the characteristics of the system are evaluated at the view point of the average bit error rate due to the SNR. In addition, the multi-tap update algorithm which is superior for the data compensation is suggested. Moreover, using the American Joint Technical Committee PCS RF channel characterization and system deployment model standard, the suggested multi-tap update algorithm is compared and analyzed with the view-point of the average bit error rate and convergence speed for evaluating the realistic efficiency of the system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.2
• /
• pp.53-57
• /
• 2002

Recently, digital communication system becomes high speed, as communication demand dose not only increases sharply, but an image, voice various kinds data also comes multimedia. In transmitting data at a high speed, the main problem is fading by multipath. A linear or nonlinear distortion arise In multipath channel fading from ISI(Intersymbol Interference). For restoring this distorted signal, A lot of equalizer and adaptive algorithm is introduced. This paper compares and analysises, for improving communication quality in channel which is long delay spread, performance of decision feedback equalizer by RLS algorithm, a channel estimation by RLS-MLSE and viterbi equalizer Particularly, there Is exactly channel estimation of impluse response and excellent property of equalization about channel, which delay spread is long impluse response comparatively and is property of non-minimun phase.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.57-62
• /
• 2004

This paper deals with a waypoint trajectory following problem for the tilt-rotor UAV under development in Korea (TR-KUAV). In this problem, dynamic model inversion based on the linearized model and Sigma-Phi neural network with adaptive weight update are involved to realize the waypoint following algorithm for the vehicle in the helicopter flight mode (nacelle angle=0 deg). This algorithms consists of two main parts: outer-loop system as a command generator and inner-loop system as stabilizing controller. In this waypoint following problem, the position information in the inertial axis is given to the outer-loop system. From this information, Attitude Command/Attitude Hold logic in the longitudinal channel and Rate Command/Attitude Hold logic in the lateral channel are realized in the inner-loop part of the overall structure of the waypoint following algorithm. The nonlinear simulation based on the TR-KUAV is carried out to evaluate the stability and performance of the algorithm. From the numerical simulation results, the algorithm shows very good tracking performance of passing the waypoints given. Especially, it is observed that ACAH/RCAH logic in the inner-loop has the satisfactory performance due to adaptive neural network in spite of the model error coming from the linear model based inversion.

• Journal of applied mathematics & informatics
• /
• v.29 no.5_6
• /
• pp.1583-1602
• /
• 2011

A special system of partial differential equations (PDEs) occur in a natural way while studying a class of irrotational inviscid fluid flow problems involving infinite channels. Certain aspects of solutions of such PDEs are analyzed in the context of flow problems involving multiple layers of fluids of different constant densities in a channel associated with arbitrary bottom topography. The whole analysis is divided into two parts-part A and part B. In part A the linearized theory is employed along with the standard Fourier analysis to understand such flow problems and physical quantities of interest are derived analytically. In part B, the same set of problems handled in part A are examined in the light of a weakly non-linear theory involving perturbation in terms of a small parameter and it is shown that the original problems can be cast into KdV type of nonlinear PDEs involving the bottom topography occurring in one of the coefficients of these equations. Special cases of bottom topography are worked out in detail and expressions for quantities of physical importance are derived.

• Journal of Advanced Navigation Technology
• /
• v.10 no.1
• /
• pp.20-25
• /
• 2006

In these days, OFDM(Orthogonal Frequency Division Multiplexing) is adopted to support high-speed data communication based on multi-path RF channel, but it has some weak point. One of those is that it has a higher PAR(peak-to-average power ratio) compared with single-carrier method. If some PAR of the transmitted signal is high, nonlinear amplitude distortion has occurred when it pass through the HPA(high power amplifier). There is a solution to prevent nonlinear distortion using higher peak power HPA, but it makes inefficiency and a cost problem. In this paper, we choose the SLM(Selected Mapping) scheme, which transmit the lowest PAR signal after OFDM symbol mapping, in various schemes reducing PAR for OFDM system. And we derived the performances of SLM method in fading channel through computer simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.4
• /
• pp.318-324
• /
• 2013

For blind channel equalization, the reliability of signal estimate determines the convergence speed and steady-state performance of the equalizer. Therefore the nonlinear estimator and reference signal being used in signal estimate should be chosen appropriately. In this paper, to increase the reliability of the signal estimate, two errors were obtained by applying coarse signal points and dense signal points respectively to signal estimate, the relative reliabilities of two errors were calculated, then the equalizer was adapted deferentially utilizing the reliabilities. At this point, by applying two errors alternately, two modes of operation were smoothly combined. Through computer simulations the proposed method was confirmed to achieve fast transient state convergence and low steady-state error compared to traditional methods.

• Steel and Composite Structures
• /
• v.28 no.2
• /
• pp.233-250
• /
• 2018

Back-to-back built-up cold-formed steel un-lipped channel sections are used in cold-formed steel structures; such as trusses, wall frames and portal frames. In such built-up columns, intermediate fasteners resist the buckling of individual channel-sections. No experimental tests or finite element analyses have been reported in the literature for back-to-back built-up cold-formed steel un-lipped channel sections and specially investigated the effect of screw spacing on axial strength of such columns. The issue is addressed in this paper. The results of 95 finite element analyses are presented covering stub to slender columns. The finite element model is validated against the experimental tests recently conducted by authors for back-to-back built-up cold-formed steel lipped channel sections. The verified finite element model is then used for the purposes of a parametric study to investigate the effect of screw spacing on axial strength of back-to-back built-up cold-formed steel un-lipped channel sections. Results are compared against the built-up lipped channel sections and it is shown that the axial strength of un-lipped built-up sections are 31% lesser on average than the built-up lipped channel sections. It was also found that the American Iron and Steel Institute (AISI) and the Australian and New Zealand Standards were over-conservative by around 15% for built-up columns failed through overall buckling, however AISI and AS/NZS were un-conservative by around 8% for built-up columns mainly failed by local buckling.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.49-56
• /
• 2006

In this paper, to overcome the effect of nonlinear power amplifier, CE-CPSK(Constant Envelope Continuous Phase Shift Keying)modulation method which has the constant envelope and continuous phase characteristics is proposed. The code acquisition performances of the CE-CPSK modulated system and BPSK system are analyzed. And the performance is evaluated in terms of mean acquisition time and detection probability with the output backoff of the amplifier in multiuser environment. Results performed in a channel having a high degree of AM nonlinearity(AM-to-AM conversion), have shown that the CE-CPSK signal, when passed through class C-nonlinear Amplifier, has a spectrum with greatly reduced sidelobes compared to the conventional BPSK signal. The code acquisition performance of a CE-CPSK modulation system is better than that of BPSK system with nonlinear amplified multiuser environments.

• Journal of Korea Water Resources Association
• /
• v.42 no.4
• /
• pp.297-307
• /
• 2009

For reliable water quality simulation by semi distributed model, accurate daily runoff simulation should have preceded. In this study, newly developed channel routing method which is nonlinear storage method is combination of Muskingum routing method and variable storage routing method and temporally weighted average curve number method were applied for effect analysis of water quality simulation. Developed modules, which are added in SWAT models and simulation, were conducted for the Chungju dam watershed. The simulation result by each module applied effect. As a result of analysis contribute water quality modeling, nonlinear storage method is more effective than temporally weighted average curve number method. Nutrient loading discharge was affected by development of runoff delaying from improvement of channel routing, because of characteristics of nonpoint source pollution.