• 한국응용과학기술학회지
• /
• 제15권2호
• /
• pp.25-32
• /
• 1998

The emulsion stability of W/O emulsion prepared by D phase emulsification during storage and handling is studied by using phase diagrams. The process of D phase emulsification begins with the formation of isotropic surfactant solution, followed by formation of oil-in-surfactant (O/D) gel emulsion by dispersion of octamethylcyclotetrasiloxane(OMCS) in the surfactant solution. Polyols were essential components for this purpose. To understand the function of polyols, the solution behavior of nonionic surfactant/oil/water/polyol systems were investigated by the ternary phase diagrams of polyoxyethylene oleyl ether/OMCS/propylene glycol(PG) aqueous solutions. The addition of PG increased the solubility of oil in the isotropic surfactant phase. D phase emulsification method has been applied to a new type of cosmetics. By using this emulsification technique, O/W emulsion were formed without a need for adjust of HLB. Fine and stable W/O emulsions were prepared by D phase emulsion.

• 한국응용과학기술학회지
• /
• 제26권4호
• /
• pp.422-427
• /
• 2009

We have investigated the effects of polyols and NaCl on the rheological behaviours of surfactant mixtures. Sodium lauryl ether sulfate (SLES), cocamidopropyl betaine (CAPB), disodium cocoamphodiacetate (DSCA), cocamide DEA (CDEA) and lauroyl/myristoyl DEA (LMDE) were used as surfactants. The polyols added into the surfactant mixture were 1,3-butylene glycol, propylene glycol, glycerin, sorbitol, dipropylene glycol, PEG 1500 and PEG 400. The addition of amphoteric surfactant to SLES aqueous solution lead to increase the height of foam and the viscosity of the system. The addition of nonionic surfactant, LMDE or CDEA to the SLES aqueous solution increased the viscosity and the effect of LMDE was better than that of CDEA. The effect of adding polyols and NaCl into the surfactant mixture aqueous solution lead to increase or decrease the viscosity of the systems depending on the concentration of NaCl and the kinds of polyols. These results can be explained through the salting in or salting out of surfactant of the systems.

• Journal of Pharmaceutical Investigation
• /
• 제32권4호
• /
• pp.299-303
• /
• 2002

The oral bioavailability of itraconazole is variable and low in fasting state. This is mainly due to the low solubility of this drug. Bioavailability can be improved by changing the formulation and it is general that the liquid preparations show greater bioavailability than the solid dosage forms such as tablets and capsules do. Benzyl alcohol-water binary mixture showed the excellent solubilizing capacity for itraconazole but the release of the drug from the preparation needs to be enhanced. In this study, various nonionic surfactants and hydrophilic polymers, poloxamers, were screened to investigate their effects on the releasε of itraconazole from the liquid preparations. Poloxamer 407 showed the most enhancing effect on the drug release and the release rate was proportional to thε amount of poloxamer 407 added. A liquid preparation of itraconazole, consisting of benzyl alcohol/water/poloxamer 407 ternary solvent system, releasεd more than 80% of the total drug amount at 5 min and showεd the possibility of a new formulation development.

• 한국응용과학기술학회지
• /
• 제5권1호
• /
• pp.41-51
• /
• 1988

Aliphatic aldehyde polyoxyethylene glycol acetals were synthesised through the reaction of aliphatic aldehydes such as caproic aldehyde, capryl aldehyde, capric aldehyde and lauric aldehyde with excess diethylene glycol, triethylene glycol and tetraethylene glycol, respectively. The acetal formation, in which water was azeotropically distilled by adding benzene to the reaction system, was gained a good yield of acetal type compounds. This reaction is found pseudo first order reaction at various temperatures such 70, 80, 90 and $97^{\circ}C$. Also these activation energies of reaction of acetal type products such as caproic aldehyde diethylene glycol acetal, capryl aldehyde diethylene glycol acetal, capric aldehyde diethylene glycol acetal, lauric aldehyde diethylene glycol acetal, caproic aldehyde triethylene glycol acetal and caproic aldehyde tetraethylene acetal were 17.3, 19.6, 21.2, 21.6, 15.5 and 14.7 Kcal/mole.

• 한국응용과학기술학회지
• /
• 제24권2호
• /
• pp.160-166
• /
• 2007

The rheological properties and surface tensions of polymer solutions and polymer-surfactant mixed solutions were investigated. The polymers used in this study were a homopolymer of acrylic acid crosslinked with an allyl ether of pentaerythritol, an allyl ether of sucrose, or an allyl ether of propylene (CARBOMER), acylate/C10-30 alkyl acylate crosspolymer (AAAC), and ammonium acryloydimethyltaurate/VP copolymer (ADTV). A solubilizing agent PEG-40 hydrogenated castor oil (HCO-40) and an emulsifying agent polyoxyethylene (20) sorbitan monostearate (POLYSORBATE 60) made the micelles intervening between AAAC polymers, resulting in the increase of viscosity. However, HCO-40 made this behavior over the wider range of surfactant concentration than POLYSORBATE 60. From the view point of surface tensions in the same range of surfactant concentration, AAAC/HCO-40 solution showed the area of increasing surface tension with surfactant concentration in contrast to the AAAC/POLYSORBATE 60 solution showing no increasing area.

• 한국응용과학기술학회지
• /
• 제23권2호
• /
• pp.169-176
• /
• 2006

Acrylic adhesives for automobiles protection were prepared by emulsion polymerization. Monomers used were n-butyl acrylate(BA), acrylonitrile (AN), butyl methacrylate(BMA), glycidyl methacrylate(GMA), and acrylic acid (AA). Emulsifiers used were sodium lauryl sulfate and polyoxyethylene lauryl ether, which are an anionic emulsifier and a nonionic emulsifier respectively. Potassium persulfate was used as an initiator and polyvinyl alcohol was used as a stabilizer. Emulsion polymerization was carried out in a semi-batch reactor at $70^{\circ}C$ and agitation speed was kept at 200 rpm. Water resistance, heat resistance, acid resistance, alkali resistance and smoke resistance were examined. As a result, when each 0.03 mole of GMA and AA was introduced, the adhesion properties and various above mentioned resistances of the prepared adhesives were satisfied the standard for automobiles.

• 한국미생물·생명공학회지
• /
• 제22권1호
• /
• pp.85-91
• /
• 1994

The characteristcs of monascus fermentation using a hyperpigment-producing mutant, Monascus sp. J101, were analyzed, and the extractive fermentations employing permeabilizing agents and resin were carried out to increase the productivity of red pigment. And the kinetic analysis was also carried out in case of the monascus fermentation using Amberlite XAD-7. The extracellular content of the red pigment produced by Monascus sp. J101 was about 17% of the total, and the production of pigment was regulated by its own product. The cell growth reached a stationary phase at 48 hours ofter inoculation, whereas the pigment production continued up to 100 hours, which showed the pattern of a mixed growth-associated type. During the fermentation, various permeabilizing agents were added to the culture medium and their effects on pigment production were examined. By adding 0.05% Triton X-100 at 48 hours of cultivation, about an 18% increase in pigment production was accomplished as compared to the control, 12% ethyle acetate and 15% for 0.05% deoxycholate, respectively. When a nonionic adsorbent, Amberlite XAD-7 was added to the culture medium at a concentration of 12.0% at 48 hours of cultivation, the pigment production was enhanced by about 48.9% as compared to the control.

• Macromolecular Research
• /
• 제17권12호
• /
• pp.943-949
• /
• 2009

A highly dispersed W/O emulsion of silicone oil (cyclomethicone)/water system was prepared with a nonionic surfactant. The surface and interfacial tension between the oil and water were characterized in terms of the droplet size distribution and viscosity change of the emulsion. When the dispersed phase concentration was relatively high, the viscosity of the emulsion was rapidly increased and the droplet size of the emulsion was decreased. The rheological behavior of the emulsion system showed non-Newtonian and shear thinning phenomena depending upon the content of the dispersed phase. The droplet size of the emulsion was decreased with increasing surfactant content and water concentration. The relative viscosity of the emulsion was better predicted with the Choi-Schowalter model than with the Taylor model. The value of the complex modulus increased with increasing surfactant concentration. The linear viscoelastic region was expanded with a dispersed phase concentration. According to the change in the viscosity, the behavior was classified into three distinct regions: [I] linear viscoelastic, [II] partially viscoelastic, and [III] viscous. The creep/recovery behaviors in each region were characterized.

• Bulletin of the Korean Chemical Society
• /
• 제26권4호
• /
• pp.548-552
• /
• 2005

The interaction between ionic surfactants and different nonionic molecules and polymers are studied using ion surfactant selective electrode. From the experimental data, critical concentrations of the interaction and binding process are evaluated. The interaction between hexadecyltrimethylammonium bromide (HTAB) with polyethylene glycol (PEG) in three molecular weights (1000, 10000 and 100000) and also schiff-bases, 2-[2-carboxyphenyl nitrilomethylidyne]-phenol (ortho CNP), 2-[3-carboxyphenyl nitrilomethylidyne]-phenol (meta CNP)and 2-[4-carboxyphenyl nitrilomethylidyne]-phenol (para CNP) with the potentiometric method were investigated using HTAB membrane selective electrode. In the case of PEG with increasing molecular weights more interaction to HTAB occurs. The electromotive force (EMF) data also showed that interaction between para CNP with HTAB is more than the other schiff-bases. It seems this case related to less space interference of COOH group for that compound. The onset of binding ($T_1$) of course is the same for three schiffbase molecules.

• 공업화학
• /
• 제8권4호
• /
• pp.673-678
• /
• 1997

본 연구에서는 associative macromonomer로서 비이온성 vinyl surfactant ester(alkyloxy $poly(ethyleneoxy)_n$ ethyl acrylate)[VSE]를 사용한 유화중합을 통하여 회합형 아크릴 증점제를 합성하고, 유성학적 물성을 고찰하였다. VSE의 소수성 말단기의 탄소수, ethoxylation 정도에 따라 회합형 증점제의 증점제의 증점효과가 크게 영향을 받았다. VSE의 종류를 고정하고, 공단량체 조성을 달리하여 제조한 아크릴 회합형 증점제의 수용액 점도 병화를 고찰한 결과, VSE의 양이 늘어날수록 증점효과가 증가하였다. 이것은 VSE의 소수성 말단기의 상호작용에 의한 회합 증점 메카니즘에 의해 증점효과가 향상되었기 때문이다. 또한 사슬전이제에 의한 분자량이 감소할수록 hydrodynamic volume이 작아져 증점효과가 감소하였다.