• 한국압력기기공학회 논문집
• /
• 제5권1호
• /
• pp.14-19
• /
• 2009

NDE(Nondestructive examination) detects a flaw or discontinuity in materials. Flaws detected by the examination shall be evaluated for the decision basis of the integrity. The internal flaws of forging products can be detected by UT. However, UT has detection limits because of its reflected signal weakness. Normally, a 1mm or less flaw is known as the limit. If a flaw was detected, the size of flaw would be evaluated by AVG(or DGS) technique. To verify the evaluation data, alternative examination methods are needed. But there is no alternative examination methods until now. In this study, Phased array ultrasonic technique can be used to size the flaws in the generator rotor with focused beam of ultrasonic wave as a supplement method of AVG. Also, the phased array ultrasonic technique described enables the shape of flaw to be depicted exactly.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.257-262
• /
• 2004

As optical connectors dominate the performance of optical transmitters or receivers, they need an ultra-precise processing and are composed of optical fibers, ferrule and optical glass lenses. Therefore, this study suggests a nondestructive evaluation technique or a system using resonant ultrasound spectroscopy to evaluate flaws in a optical glass lens. It also conducted a nondestructive evaluation for flaws that are commonly found in a optical glass lens and reviewed the results.

• 비파괴검사학회지
• /
• 제30권4호
• /
• pp.317-323
• /
• 2010

원자력발전소 배관 용접부에 대한 수동 초음파검사는 KPD(Korean Performance Demonstration)의 일반 절차서를 사용하여 기량 검증을 인정받고 있으나, 자동 초음파검사의 경우에는 일반 절차서가 없으며 해당 자동 검사 장비를 이용하여 절차서 기량 검증을 받아야 한다. 현재까지 국내에서 수행되고 있는 자동 초음파검사에 대한 절차서 기량검증은 대부분 펄스-반사기법을 적용한 절차서이나, 최근에 각광받고 있는 위상배열 초음파검사 기법을 이용한 절차서 기량검증은 국내에서 시행된 사례가 전무하다. 본 연구에서는 원자력발전소 가동중검사에 위상배열 초음파검사 기법을 적용하기 위하여 위상배열 초음파 신호취득 및 평가 소프트웨어를 개발하고 위상배열 초음파 탐촉자 및 웨지를 설계 하였다. 개발된 절차서에 대하여 결함 검출, 길이 및 크기 측정에 대한 기량검증을 수행하였으며, 검증된 위상배열 초음파탐상검사 절차서는 향후 원자력발전소 배관 용접부 검사에 적용할 예정이다.

• Nuclear Engineering and Technology
• /
• 제49권3호
• /
• pp.651-661
• /
• 2017

The Korea Institute of Nuclear Safety, as a representative organization of Korea, in February 2012 participated in an international Program to Assess the Reliability of Emerging Nondestructive Techniques initiated by the U.S. Nuclear Regulatory Commission. The goal of the Program to Assess the Reliability of Emerging Nondestructive Techniques is to investigate the performance of emerging and prospective novel nondestructive techniques to find flaws in nickel-alloy welds and base materials. In this article, Korean round-robin test results were evaluated with respect to the test blocks and various nondestructive examination techniques. The test blocks were prepared to simulate large-bore dissimilar metal welds, small-bore dissimilar metal welds, and bottom-mounted instrumentation penetration welds in nuclear power plants. Also, lessons learned from the Korean round-robin test were summarized and discussed.

• 비파괴검사학회지
• /
• 제3권1호
• /
• pp.19-25
• /
• 1983

Some studies have been made on the effects of the attenuation on the result of ultrasonic examination of austenitic stainless steel weldment and also on the cause of false indications. The differences in the amplitudes and the metal paths of the ultrasonic examinations have been measured experimentally, for two kinds of waves, one passed through only the parent material and the other one through the weldment. The effect of probe angles and frequency on the examination data have been investigated using the shear wave. It has been found that the false indications were caused by back reflection from the weld metal surface due to the characteristics of ultrasonic wave propagation. It has been confirmed that the probe of $2.25\;MHz\;and\;60^{\circ}$ is the best choice in the ultrasonic examination and that the correction of amplitude for attenuations is necessary.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2199-2201
• /
• 2001

The 3-dimensional measuring machine by using an ultrasonic sensor is used one of the NDE(Nondestructive Examination). It is applied to the inspection of pipelines, boreholes, pressure vessel and tank, and so on. In particular when a harsh environment prohibits the use of moving mechanical parts. The 3-dimensional measuring machine by using an ultrasonic sensor, which measure 1-dimensional information and 2-dimensional information simultaneously from a target of inspection, and then reembody 3-dimensional information. So we can find the situation in progress and predict remaining life and corrosion without destructive examination. It's a point of excellence that the 3-dimensional measuring machine is portable.

• 비파괴검사학회지
• /
• 제24권4호
• /
• pp.371-377
• /
• 2004

원자력 발전소의 터빈에서 운전 연수 증가에 따라 pin finger형 블레이드 루트부에 균열이 발생하는 문제점이 발생되었다. 블레이드 루트부에 대한 비파괴검사는 매 계획 예방 정비기간 동안 수동 초음파 검사를 통하여 수행되어 왔으나, 검사의 신뢰성을 확보하기 위해 해당 설비에 대한 자동 초음파 검사 기술 개발의 필요성이 대두되었으며, 이에 따라 자동 초음파 검사 장비 및 검사 기술을 개발하였다. 개발된 검사 장비의 적용성을 확인하기 위해 계획 예방 정비 기간 중 저압터빈 2, 3단 블레이드 루트부에 대한 자동 초음파 검사를 수행하고, 다양한 형태의 터빈 검사에 확대 적용 가능성을 확인하였다.

• 비파괴검사학회지
• /
• 제35권4호
• /
• pp.258-267
• /
• 2015

Eddy current testing is widely used for inspecting steam generator tubing in nuclear power plants (NPPs). The inspection technique for steam generator tubing in NPPs should be qualified in accordance with examination guidelines. When the components of a qualified system such as eddy current tester, probe, and data analysis program, are changed, the equivalency of the modified system to the originally qualified system must be verified. The eddy current tester is the most important part of an eddy current testing system because it excites and transmits alternating currents to the probe, receives coil impedance of the probe and generates signals for anomalies. The Korea Hydro & Nuclear Power Co., Ltd. (KHNP) developed an eddy current testing system with an eddy current tester and data acquisition-analysis program for inspecting the steam generator tubing in NPPs; this system can be used for an array probe and as a bobbin and rotating probes. The equivalency assessment for the currently developed system was carried out, and we describe the results in this paper.

• 비파괴검사학회지
• /
• 제23권4호
• /
• pp.372-379
• /
• 2003

The problems encountered by ultrasonic testing of austenitic stainless steel weld joints are discussed in the paper. Due to low thermal conductivity and the occurrence of single phase between the melting point and the room temperature, coarse and oriented grains are formed in such weld metals more in thick sections. This leads to higher scattering at the grain boundaries and low signal to noise ratio, and extensive beam skewing. Experimental results to understand these problem are explained.

• 비파괴검사학회지
• /
• 제8권1호
• /
• pp.6-11
• /
• 1988

The comparison and analysis of flaw detectability, flaw sizing methods and allowable criteria in accordance with the applicable codes, ASME and RCC-M Code, in ultrasonic examination of pressure vessel in nuclear power plants were studied. Accordding to the codes, calibration blocks were made. The artificial flaws such as disc and band types in test specimens were machined. They were detected and evaluated with etch code requirements and measured values were compared with the actual flaws.