• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 1999.11a
• /
• pp.145-149
• /
• 1999

• Proceedings of the Korean Vacuum Society Conference
• /
• 2008.08a
• /
• pp.130-130
• /
• 2008

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.05a
• /
• pp.21-21
• /
• 1999

• Journal of KIISE
• /
• v.41 no.11
• /
• pp.878-884
• /
• 2014

File I/O buffer cache plays an important role in narrowing the wide speed gap between the main memory and the secondary storage. However, data loss or inconsistencies may occur if the system crashes before the data that has been updated in the buffer cache is flushed to storage. Thus, most operating systems adopt a daemon that periodically flushes dirty data to the secondary storage. In this study, we show that periodic flushes account for 30-70% of the total write traffic to storage and remove this inefficiency by implementing a small, non-volatile buffer cache. Specifically, we present space-efficient management techniques, such as delta-write and fragment-grouping, and show that the storage write traffic and throughput can be improved by a margin of 44.2% and 23.6%, respectively, with only a small NVRAM.

• Journal of Magnetics
• /
• v.7 no.3
• /
• pp.101-105
• /
• 2002

MRAM (Magnetoresistive Random Access Memory) is a promising candidate for a universal memory that meets all application needs with non-volatile, fast operational speed, and low power consumption. The simplest architecture of MRAM cell is a series of MTJ (Magnetic Tunnel Junction) as a data storage part and MOS transistor as a data selection part. This paper is for testing the actual electrical parameters to adopt MRAM technology in the semiconductor based memory device. The discussed topics are an actual integration of MRAM core cell and its properties such as electrical tuning of MOS/MTJ for data sensing and control of magnetic switching for data writing. It will be also tested that limits of the MRAM technology for a high density memory.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1555-1557
• /
• 2002

We have investigated the precharge type sense amplifier, it is suitable fur voltage sensing in a NOR type single transistor ferroelectric field effect transistor (1T FeFET) memory read operation. The proposed precharge type sense amplifier senses the bit line voltage of 1T FeFET memory. Therefore, the reference celt is not necessary compared to current sensing in 1T FeFET memory, The high noise margin is wider than the low noise margin in the first inverter because requires tile output of precharge type sense amplifier high sensitivity to transition of input signal. The precharge type sense amplifier has very simple structure and can sense the bit line signal of the 1T FeFET memory cell at low voltage.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.330-338
• /
• 2016

Phase change memory (PCM) has been studied as an emerging memory technology for last-level cache (LLC) due to its extremely low leakage. However, it consumes high levels of energy in updating cells and its write endurance is limited. To relieve the write pressure of LLC, we propose a delta value indicator (DVI) by employing a small cache which stores the difference between the value currently stored and the value newly loaded. Since the write energy consumption of the small cache is less than the LLC, the energy consumption is reduced by access to the small cache instead of the LLC. In addition, the lifetime of the LLC is further extended because the number of write accesses to the LLC is decreased. To this end, a delta value indicator and controlling circuits are inserted into the LLC. The simulation results show a 26.8% saving of dynamic energy consumption and a 31.7% lifetime extension compared to a state-of-the-art scheme for PCM.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.196-197
• /
• 2010

NAND형 charge trap flash (CTF) non-volatile memory (NVM) 소자가 30nm node 이하로 고집적화 되면서, 기존의 SONOS형 CTF NVM의 tunnel barrier로 쓰이는 SiO2는 direct tunneling과 stress induced leakage current (SILC)등의 효과로 인해 data retention의 감소 등 물리적인 한계에 이르렀다. 이에 따라 개선된 retention과 빠른 쓰기/지우기 속도를 만족시키기 위해서 tunnel barrier engineering (TBE)가 제안되었다. TBE NVM은 tunnel layer의 전위장벽을 엔지니어드함으로써 낮은 전압에서 전계의 민감도를 향상 시켜 동일한 두께의 단일 SiO2 터널베리어 보다 빠른 쓰기/지우기 속도를 확보할 수 있다. 또한 최근에 각광받는 high-k 물질을 TBE NVM에 적용시키는 연구가 활발히 진행 중이다. 본 연구에서는 Si3N4와 HfAlO (HfO2 : Al2O3 = 1:3)을 적층시켜 staggered의 새로운 구조의 tunnel barrier Capacitor를 제작하여 전기적 특성을 후속 열처리 온도와 방법에 따라 평가하였다. 실험은 n-type Si (100) wafer를 RCA 클리닝 실시한 후 Low pressure chemical vapor deposition (LPCVD)를 이용하여 Si3N4 3 nm 증착 후, Atomic layer deposition (ALD)를 이용하여 HfAlO를 3 nm 증착하였다. 게이트 전극은 e-beam evaporation을 이용하여 Al를 150 nm 증착하였다. 후속 열처리는 수소가 2% 함유된 질소 분위기에서 $300^{\circ}C$와 $450^{\circ}C$에서 Forming gas annealing (FGA) 실시하였고 질소 분위기에서 $600^{\circ}C{\sim}1000^{\circ}C$까지 Rapid thermal annealing (RTA)을 각각 실시하였다. 전기적 특성 분석은 후속 열처리 공정의 온도와 열처리 방법에 따라 Current-voltage와 Capacitance-voltage 특성을 조사하였다.

• Journal of KIISE
• /
• v.42 no.3
• /
• pp.379-389
• /
• 2015

With the advent of non-volatile memories such as Phase Change Memory (PCM or PRAM) and Magneto Resistive RAM (MRAM), active studies have been carried out on how to replace Dynamic Random-Access Memory (DRAM) with PRAM. In this paper, we study both endurance and performance issues of existing join algorithms that are based on PRAM-based computer systems and have been widely used until now: Block Nested Loop Join, Sort-Merge Join, Grace Hash Join, and Hybrid Hash Join. Our experimental results show that the existing join algorithms need to be redesigned to improve both the endurance and performance of PRAMs. To the best of our knowledge, this is the first research to scientifically study the results of the four join algorithms running on PRAM-based systems. In this work, our main contribution is the modeling and implementation of a PRAM-based simulator for a comparative study of the existing join algorithms.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.288-288
• /
• 2011

최근 Charge Trap Flash (CTF) Non-Volatile Memory (NVM) 소자가 30 nm node 이하로 보고 되면서, 고집적화 플래시 메모리 소자로 각광 받고 있다. 기존의 CTF NVM 소자의 tunnel layer로 쓰이는 SiO2는 성장의 용이성과 Si 기판과의 계면특성, 낮은 누설전류와 같은 장점을 지니고 있다. 하지만 단일층의 SiO2를 tunnel layer로 사용하는 기존의 Non-Valatile Memory (NVM)는 두께가 5 nm 이하에서 direct tunneling과 Stress Induced Leakage Current (SILC) 등의 효과로 인해 게이트 누설 전류가 증가하여 메모리 보존특성의 감소와 같은 신뢰성 저하에 문제점을 지니고 있다. 이를 극복하기 위한 방안으로, 최근 CTF NVM 소자의 Tunnel Barrier Engineered (TBE) 기술이 많이 접목되고 있는 상황이다. TBE 기술은 SiO2 단일층 대신에 서로 다른 유전율을 가지는 절연막을 적층시킴으로서 전계에 대한 민감도를 높여 메모리 소자의 쓰기/지우기 동작 특성과 보존특성을 동시에 개선하는 방법이다. 또한 터널링 절연막으로 유전률이 큰 High-K 물질을 이용하면 물리적인 두께를 증가시킴으로서 누설 전류를 줄이고, 단위 면적당 gate capacitance값을 늘릴 수 있어 메모리 소자의 동작 특성을 개선할 수 있다. 본 연구에서는 CTF NVM 소자의 trap layer로 쓰이는 HfO2의 두께를 5 nm, blocking layer의 역할을 하는 Al2O3의 두께를 12 nm로 하고, tunnel layer로 Si3N4막 위에 유전율과 Energy BandGap이 유사한 HfAlO와 ZrO2를 적층하여 Program/Erase Speed, Retention, Endurance를 측정을 통해 메모리 소자로서의 특성을 비교 분석하였다.