• 한국전산유체공학회지
• /
• 제22권1호
• /
• pp.88-94
• /
• 2017

The IR signal entering into a sensor is composed of the following components: the self-emitted component directly from the object surface, the reflected components of the solar and sky irradiance at the object surface, and the scattered component by the atmosphere without reference to any object surfaces. The self-emitted and reflected components from the object can be lowered by the atmospheric layer between the object and the IR sensor. The principle factors influencing the atmospheric transmittance are the air temperature, the relative humidity and the observation distance. Previous studies on IR signal transmission through the atmosphere are focused on uniform atmospheric conditions and the non-uniform nature of the atmosphere was not properly treated in modeling. In this study, we use the local atmospheric transmittance to simulate the non-uniform atmosphere in analyzing the IR signal from the object surface. The results show that the nonuniform analysis of the atmosphere becomes more important as the wavelength of IR signal increases.

• 대한가정학회지
• /
• 제30권1호
• /
• pp.11-24
• /
• 1992

The purpose of this study is to investigate the present states and preferences for a type of campus wear, the differences between the life-style variables and clothing behavior among school uniform students and non-uniform students, to explore variabels of the purchasing tendency in clothes of boys' and girls' high school students. The questionnaires were administered to samples of four boys' and girls' high schools respectively in Kwangju. The data from 522 respondants were analyzed in using Frequency and T-test. The results were as follows: 1. Most of schools are likely to take a school uniform system in the near future but students do not have favorable attitude against the system. 2. There were partly significant differences between the clothing behavior variables (boys : psychological dependence, comfort and atmosphere of the store, girls : downtown shopping) among school uniform students and non-uniform students. 3. There were partly significant differences between life-style variables(boys : leadership and social attitude, advertisement confidence, girls : price consciousness) among school uniform students and non-uniform students. 4. About 80% of the subject group planned their clothing purchase in advance, and their parents and friends influenced on clothing buying behaviors more then other fashion information sources, however, for the boy students the atmosphere of the store is most affecting variables. The store in which the subject group purchased clothing most frequently was a specialty fashion store. In clothing selection, aesthetic factors were showen as important factor and the most affecting mass media is TV.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1403-1406
• /
• 2002

Environmental impact of human activities has become a great concern in most of the countries world-wide, and for years. It has recently focused on potential climate changes due to the increase of green house gases content in the atmosphere. One of these gases is $SF_6$, which is an essential material in electrical applications having excellent dielectric and arc-quenching properties. Though the actual contribution of $SF_6$ to global warming is negligible at present, the control of $SF_6$ emissions seems to be nevertheless imperative. Actually, it is listed in the Kyoto protocol that emissions should not only be duly reported but also the electrical industry which is now the major user of this gas must be able to show that it is possible to use this gas and at the same time preserve the environment. For the development of environmentally-benign electric power equipment and systems, novel gases or gas mixtures are strongly required as the alternatives of $SF_6$ gas. Until now, most research work is focused on the $SF_6/N_2$ mixed gas which is suitable for application in the electrical apparatus with slightly non-uniform fields. Recently, $SF_6/CO_2$ mixed gas also is expected to be promising as a $SF_6$ alternative, especially in highly non-uniform fields and in a gas-impregnated film insulation system. Including these results, the author reviews the research trend or reducing the environmental impact of $SF_6$ gas in this paper.

• 한국환경과학회지
• /
• 제8권6호
• /
• pp.653-660
• /
• 1999

The flow of non-rotation atmosphere with uniform stratification and wind past an isolated three dimensional topography obstacle is investigated with three-dimensional hydrostatic and non- hydrostatic numerical model. The characteristic of turbulence created the back of topography obstacle is usually defined by Froude number which is the function of upstream wind speed, the height of topography obstacle, and atmospheric stability. Turbulence tends to be formed more easily at the non-hydrostatic model than hydrostatic model. Especially, the difference between flow patterns of two models generated by isolated obstacle is more clear under low Froude number. The difference of flow patterns can be only seen at relatively low altitude, but at high altitude the patterns of two models are almost same. In this research, wind velocity in the parameters related with Froude number have great sensitivity at responsibility of numerical models. and slop of obstacle is also important factor at the flow pattern regardless of the species of numerical model

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1018-1021
• /
• 2006

Powdered metal parts and components may be carburized successfully in a vacuum furnace by combining carburizing technology $VacCarb^{TM}$ with a hi-tech control system. This approach is different from traditional carburizing methods, because vacuum carburizing is a non-equilibrium process. It is not possible to set the carbon potential as in a traditional carburizing atmosphere and control its composition in order to obtain a desired carburized case. This paper presents test results that demonstrate that vacuum carburizing system $VacCarb^{TM}$ carburized P.M. materials faster than traditional steel with acceptable results. In the experiments conducted, PM samples with the lowest density and open porosity showed a dramatic increase in the surface carbon content up to 2.5%C and a 3 times deeper case. Currently the boost-diffusion technique is applied to control the surface carbon content and distribution in the case. In the first boost step, the flow of the carburizing gas has to be sufficient to saturate the austenite, while avoiding soot deposition and formation of massive carbides. To accomplish this goal, the proper gas flow rate has to be calculated. In the case of P.M. parts, more carbon can be absorbed by the part's surface because of the additional internal surface area created by pores present in the carburized case. This amount will depend on the density of the part, the densification grade of the surface layer and the stage of the surface. "as machined" or "as sintered". It is believed that enhanced gas diffusion after initial evacuation of the P.M. parts leads to faster carburization from within the pores, especially when pores are open . surface "as sintered" and interconnected . low density. A serious problem with vacuum carburizing is delivery of the carbon in a uniform manner to the work pieces. This led to the development of the different methods of carburizing gas circulation such as the pulse/pump method or the pulse/pause technique applied in SECO/WARWICK's $VacCarb^{TM}$ Technology. In both cases, each pressure change may deliver fresh carburizing atmosphere into the pores and leads to faster carburization from within the pores. Since today's control of vacuum carburizing is based largely on empirical results, presented experiments may lead to better understanding and improved control of the process.

• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.485-490
• /
• 2010

In our previous studies, continuous SiC fiber-reinforced SiC-matrix composites ($SiC_f$/SiC) had been fabricated by two different slurry infiltration methods: vacuum infiltration and electrophoretic deposition (EPD). 12 wt% of $Al_2O_3-Y_2O_3$-MgO with respect to SiC powder was used as additives for liquid-phase assisted sintering. After hot pressing at $1750^{\circ}C$ under 20 MPa for 2 h in Ar atmosphere, a high composite density could be achieved for both cases, whereas the problems such as large grain size and non-uniform distribution of liquid phase were observed, which was resulted in the relatively poor mechanical properties of composites. Therefore, efforts have been made to reduce the grain growth during the sintering, including the optimization for hot pressing condition and utilization of spark plasma sintering using a SiC monolith. Based on the results, spark plasma sintering was found to be effective method in decreasing the amount of sintering additive, time and grain growth, which will be explained in comparison to the results of hot pressing in this paper.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1997년도 추계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.7-7
• /
• 1997

During sintering of very porous green bodies, as obtained by compaction of hard powders - such as tungsten carbide or ceramics - or by injection moulding, important shrinkage occurs. Due to heterogeneous green density field, gravity effects, friction on the support, thermal gradients, etc., this shrinkage is often non-uniform, which' may induce significant shape changes. As the ratio of compact dimension to powder size is very high, the mechanics of continuum is relevant to model such phenomena. Thus numerical techniques, such as the finite element method can be used to simulate the sintering process and predict the final shape of the sintered part. Such type of simulation has much been developed in the last decade firstly for hot isostatic pressing and next for die compaction. Finite element modelling has been recently applied to free sintering. The simulation of sintering should be based on constitutive equations describing the thermo-mechanical behaviour of the material under any state of stress and any temperature which may arise within the sintering body. These equations can be drawn either from experimental data or from micromechanical models. The experiments usually consist in free sintering and sinter-forging tests. Indeed applying more complex loading conditions at high temperature under controlled atmosphere is delicate. Micromechanical models describe the constitutive behaviour of aggregates of spheres from the deformation of two-sphere contact either by viscous flow or grain boundary diffusion. Such models are not able to describe complex microstructure and mechanisms as observed in real materials but they can give some basic information on the formulation of constitutive equations. Practically both experimental and theoretical approaches can be coupled to identify the constitutive equations. Such procedure has been performed for modelling the sintering of compacts obtained by die pressing of a mixture of tungsten carbide and cobalt powders. The constitutive behaviour of this material during sintering has been described by a linear viscous constitutive model, whose functions have been fitted from results of free sintering and sinter-forging experiments. This model has next been introduced in ABAQUS finite element code to simulate the sintering of heterogeneous green compacts of various geometries at constant temperature. Examples of simulations are shown and compared with experiments.

• 청정기술
• /
• 제20권3호
• /
• pp.283-289
• /
• 2014

가정용 진공청소기는 기본적으로 집진장치(dust collector), 프리 필터(pre filter), 모터(motor), 배기 필터(exhaust filter)의 구조를 가지며, 흡입된 먼지가 포함된 공기는 이러한 구조를 지나 깨끗한 공기가 되어 대기로 방출된다. 본 연구에서는 실생활에 사용되고 있는 구조가 다른 2개의 사이클론 청소기를 선정하여 사이클론 청소기 내 집진장치의 내부 공기 유동에 대해 전산유체역학을 적용하여 집진성능을 평가하고자 하였다. 사이클론 콘(cyclone cone) 영역에서 공기의 유선(streamline)을 해석한 결과, 사이클론 콘 영역에서 상당한 선회수를 가지는 것을 확인하였다. 특정 형상의 청소기에 대한 전산해석 결과에서 출구에서의 속도 분포가 매우 불균일한 결과를 나타내었고 이로 인해 집진성능에 악영향이 나타남이 파악되었다. 이 문제를 해결하기 위해 집진장치 형상에 추가적으로 배플을 설치하여, 달라진 속도 분포에 의한 속도 RMS (Root Mean Square) 값의 개선을 평가하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.23-23
• /
• 2018

In this study, new titanium alloys were prepared by adding elements such as tantalum (Ta), zirconium (Zr) and the like to complement the biological, chemical and mechanical properties of titanium alloys. The Ti-40Ta-xZr ternary alloy was formed on the basis of Ti-40Ta alloy with the contents of Zr in the contents of 0, 3, 7 and 15 wt. %. Plasma electrolytic oxidation (PEO), which combines high-voltage sparks and electrochemical oxidation, is a novel method to form ceramic coatings on light metals such as Ti and its alloys. These oxide film produced by the electrochemical surface treatment is a thick and uniform porous form. It is also composed of hydroxyapatite and calcium phosphate-based phases, so it has the characteristics of bone inorganic, non-toxic and very high bioactivity and biocompatibility. Ti-40Ta-xZr alloys were homogenized in an Ar atmosphere at $1050^{\circ}C$ for 1 hour and then quenched in ice water. The electrochemical oxide film was applied by using a power supply of 280 V for 3 minutes in 0.15 M calcium acetate monohydrate ($Ca(CH_3COO)_2{\cdot}H_2O$) and 0.02 M calcium glycerophosphate ($C_3H_7CaO_6P$) electrolyte. A small amount of 0.0075M zinc acetate and magnesium acetate were added to the electrolyte to enhance the bioactivity. The mechanical properties of the coated surface of Ti-40Ta-xZr alloys were evaluated by Vickers hardness, roughness test, and elastic modulus using nano-indentation, and the surface wettability was evaluated by measuring the contact angle of the coated surface. In addition, cell activation and differentiation were examined by cell culture of HEK 293 (Human embryonic kidney 293) cell proliferation. Surface properties of the alloys were analyzed by scanning electron microscopy(FE-SEM), EDS, and X-ray diffraction analysis (XRD).

• 한국재료학회지
• /
• 제11권5호
• /
• pp.398-404
• /
• 2001

SiC 보강재 표면에 도금된 Cu금속층이 Al/SiC복합재료의 젖음성에 미치는 영향을 검토하였다. 보강재에 대한 금속층의 도금은 무전해도금법을 이용하였으며, Al/SiC 복합재료의 제조는 텅스텐 발열체 진공로의$ 670^{\circ}C$~$900^{\circ}C$에서 제조하여 보강재와 기지간의 접촉부위를 촬영하여 젖음성을 측정하였다 젖음성 측정 결과 보강재에 도금된 Cu층은 젖음성을 향상시켰고, 젖음성의 개선은 보강재에 도금된 금속층과 기지간의 반응에 의해 계면에너지를 변화시킴으로서 나타난 결과이며. 반응을 통한 산화피막의 배제도 영향을 미친 것으로 판단된다