• 제목/요약/키워드: Non-uniform

검색결과 2,172건 처리시간 0.034초

준설토 주입방법에 의한 비닐튜브체의 퇴적 및 변형 특성 - 크레이터 방지 기술을 중심으로 - (A Study on the Sedimentation of Dredged Soils and Shape Changes of a Transparent Vinyl Tube by Filling Tests - Anti-Crater Formation -)

  • 김형주;성현종;이광형;이장백
    • 한국지반신소재학회논문집
    • /
    • 제13권2호
    • /
    • pp.1-10
    • /
    • 2014
  • 본 연구에서는 준설토 주입 후 튜브 내부 준설토의 퇴적분포가 튜브 형상에 미치는 영향을 분석하기 위해 준설토 주입실험 결과를 바탕으로 튜브 내 준설토의 퇴적분포와 튜브 거동에 대해 소개하였다. 튜브 내 준설토의 퇴적분포를 관찰하기 위해 투명 비닐소재를 사용하여 튜브를 제작하였고, 이때 튜브의 직경(D)은 0.5m와 0.7m이고 길이(L)는 모두 4.0m이다. 주입형태에 따른 튜브 내 준설토의 퇴적분포 형태를 관찰하기 위해 준설토 주입형태는 I-Type과 T-Type을 적용하였다. 실험은 주입, 침강 및 퇴적 후에 준설토 상부의 물을 배수과정에서 제거하고 슬러리 상태의 시료를 재주입하는 과정을 반복하여 수행하였고, 주입 및 배수 단계에서 튜브 내 준설토의 퇴적분포와 튜브의 연직 및 수평 거동을 관찰하였다. 주입실험 결과 I-Type 주입의 경우 크레이터 형성에 의한 부유 및 확산퇴적이 동시에 발생되는 분리퇴적에 의해 비균질 거동을 나타내고, T-Type 주입은 확산수평퇴적으로 인하여 퇴적 튜브 내 준설토가 균등하게 분포하는 것으로 나타났으며, 비배수 초기 연직충진비($H/D_0$)는 0.54~0.64 정도이고 수평변형비($W/D_0$)는 1.45~1.54로 퇴적고는 준설토 충진에 비례하여 증가하나 수평변형비는 일정하거나 감소하면서 튜브체의 중심은 상향이동 되고 있다.

설비공학 분야의 최근 연구 동향: 2014년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research: A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2014)

  • 이대영;김사량;김현정;김동선;박준석;임병찬
    • 설비공학논문집
    • /
    • 제27권7호
    • /
    • pp.380-394
    • /
    • 2015
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

대류식 순환장치의 저수지수체 유동특성 및 수질영향 (Study on Effect of Convection Current Aeration System on Mixing Characteristics and Water Quality of Reservoir)

  • 이요상;이광만;고덕구;염경택
    • 생태와환경
    • /
    • 제42권1호
    • /
    • pp.85-94
    • /
    • 2009
  • 용담댐 저수지에 설치된 대류식 순환장치에 대한 현장 조사 결과에 의하면 수평방향의 직접영향권은 성층 강도에 큰 영향 없이 반지름 $7{\sim}10m$에 이르는 것으로 조사 되었으며 수직방향으로는 성층강도에 따라 또는 가동기간에 따라 조금씩 달라지는 것으로 나타났다. 즉 가동시간이 길어짐에 따라 하층에서 올라온 수온이 낮은 수체는 보다 깊게 먼 곳까지 이동하는 것으로 나타났으나 성층을 깨지는 못하는 것으로 나타났다. 2008년 현장에서 실측 조사한 결과와 CFD모사 결과에 의하면 이런 조건에서 한 달을 가동하면 하층에서 올라온 수체가 대류식 장치 주변으로 수심 8 m, 지름 120 m의 수층을 이루게 되며 50일을 가동하면 수심 10 m, 지름 130m의 수층을 이루는 것으로 평가되었다. 대류식 순환장치가 설치된 지역에 대한 CFD모사를 하기 전에 이 지역의 흐름특성을 평가하였다. 대상 지역의 흐름은 연중 크게 3가지로 구분되었으며 각각의 경우 유량은 다르지만 저수지 수체의 흐름 속도는 모두 $0.05{\sim}1.5cm\;sec^{-1}$로 나타나 CFD모사시에 저수지 흐름을 고려하지 않아도 될 것으로 평가되었다. CFD를 이용한 수체거동 모사결과 순환장치로부터 3m지점에서의 유속은 $0.25m\;sec^{-1}$를 나타냈고, 5m지점에서는 $0.2m\;sec^{-1}$를 나타냈다. 현장 실측 결과와 비교시 유속은 모사 결과가 조금 크게 산정되는 것으로 나타났으나 향후 보다 많은 자료를 확보하여 비교해 보아야 할 것으로 판단되었다. 반면 영향범위는 반경방향으로 10 m지점까지는 직접영향을 받고, 그 보다 먼 지점은 간접영향권임을 나타내고 있어 이는 모사결과와 실측치 간에 일치하는 것으로 나타났다. 수면에서의 온도분포는 순환장치로부터 분출된 저온의 물이 반지름 약 10 m지점까지는 수온변화에 영향을 미치는 직접영향권인 것을 알 수 있다. 이상과 같이 모사 결과는 현장에서 실측한 것과 유사한 결과를 나타내므로 결과의 신뢰성이 높은 것으로 판단되었다.

수박접목묘의 건조스트레스 범위 탐지를 위한 엽록소형광 지수의 적용 (Application of Chlorophyll Fluorescence Parameters for the Detection of Water Stress Ranges in Grafted Watermelon Seedlings)

  • 신유경;김용현;이준구
    • 생물환경조절학회지
    • /
    • 제28권4호
    • /
    • pp.461-470
    • /
    • 2019
  • 본 연구는 육안판단이 아닌 엽록소형광 이미지 측정기법을 이용하여 비파괴적으로 수박접목묘 플러그트레이 단일 셀에 대해 건조스트레스를 정량화하고자 수행되었다. 접목 후 6일차 수박접목묘를 3일동안 균일한 관수관리 하에서 재배한 후 건조스트레스를 부여하였다. 이후 플러그트레이 단일 셀 형태의 수분함량센서를 이용하여 D1(53.0%, 충분한 수분상태)단계부터 D9(15.7%, 극심한 건조스트레스)단계까지 9개 그룹으로 분류하고 엽록소 형광을 측정하였다. 또한 건조스트레스에 영향을 받은 묘(D5-D9)에 재관수하여 육안판단으로 확인되지 않은 광합성 및 생육 회복 수준을 측정하였다. 3개의 건조스트레스 단계의 엽록소형광 곡선 형태는 건조스트레스 조기 탐지에 대해 다른 양상을 보였다. 총 16개의 엽록소 형광 지수는 건조스트레스에 노출되면서 지속적으로 감소하였으며, 육안으로 판단 가능한 D5(32.1%)단계에서 크게 감소하였다. 형광감소율(Rfd_Lss)는 초기 건조스트레스 수준(D5-D6)에서 명확하게 감소하기 시작하였으며, 최대 광화학효율(Fv/Fm)은 극심한 건조스트레스 수준(D7-D9)에서 크게 감소하였다. 따라서, Rfd_Lss 및 Fv/Fm 지수를 건조스트레스의 초기 및 이후 단계에서 생육 및 광합성 회복 평가를 위한 지표로 선정하였다. 개별 엽록소형광 지수의 수치값 차이와 엽록소형광 이미지를 통해 건조스트레스 수준이 직관적으로 확인되었다. 이러한 결과는 Rfd_Lss와 Fv/Fm은 각각 초기 및 극심한 건조스트레스를 탐지하지 위한 엽록소형광 지수로 활용될 수 있으며, Fv/Fm은 재관수시 회복 평가를 위한 최적의 엽록소형광 지수로 판단된다.

Recent research activities on hybrid rocket in Japan

  • Harunori, Nagata
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제36회 춘계학술대회논문집
    • /
    • pp.1-2
    • /
    • 2011
  • Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

  • PDF

경사지 배수불량 논에서 배수개선 효과의 지구통계적 기법을 이용한 평가 (Evaluation of Drainage Improvement Effect Using Geostatistical Analysis in Poorly Drained Sloping Paddy Soil)

  • 정기열;윤을수;박기도;박창영
    • 한국토양비료학회지
    • /
    • 제43권6호
    • /
    • pp.804-811
    • /
    • 2010
  • 경사지 논토양에서 밭작물 재배확대를 위한 합리적인 배수개선 방법을 개발하기 위하여 "배수불량"인 경사지 논토양 (경사 7-15%, 지산통)을 대상으로 배수조건에 따라 "매우불량"인 논 2개 필지, "약간불량"인 논 2개 필지의 논둑아래 기저부에 1열로 명거 (겉도랑 배수), 비닐차단막, 암거 (속도랑 배수), 관다발 등 네 가지 종류의 배수시설을 설치하여 공간상의 위치에 대한 상관관계를 분석하는 지구통계적 방법 (Geostatistical methods)를 이용하여 저비용의 실용적 배수방법을 개발하기 위해 배수개선 방법에 따른 배수개선 효과를 비교 분석하여 다음과 같은 결론을 얻었다. TDR 이용하여 측정한 배수방법별 토양수분함량의 기술통계량을 분석한 결과 배수개선 방법별 평균수분함량은 명거배수 (36.17 mm), 비닐차단막 (32.87 mm), 관다발 (28.71 mm), 암거배수 (23.21 mm) 순으로 낮은 경향을 보였으며, 또한 암거배수 처리구에서의 변이계수가 13.0%로 명거배수 (23.4%), 비닐차단막 (22.2%), 관다발 (15.1%)에 비해 포장 내에서 수분함량이 균일한 것으로 나타났다. 토양수분함량의 이론적 반베리오그램을 분석한 결과 배수등급별 문턱값 (sill)은 배수가 약간불량지에 비해 매우 불량지에서 배수개선 방법별 차이가 뚜렷하였으며, 특히 배수 매우불량지의 암거배수 처리구에서 문턱값은 9.7로 명거배수 (86.2), 비닐차단막 (66.8), 관다발 (15.7)에 비해 낮아 변이가 적고 균일성이 높아 암거배수에 의한 배수개선 효과가 큰 것으로 나타났다. 따라서 "배수불량"인 경사지 논에서는 논둑 밑 1열의 암거배수시설을 설치로 논에서 밭작물의 안정적인 생산과 농지자원의 이용전환 즉 논을 밭으로 이용해야 하는 범용농지 기반조성에 조성을 위한 저비용의 실용적인 배수개선 방법개발에 기여할 것으로 본다.

비유탕 유과 제조를 위한 진공팽화기의 개발 및 공정변수에 따른 유과의 팽화특성 (Development of Vacuum Puffing Machine for Non-deep Fried Yukwa and Its Puffing Characteristics by Process Variables)

  • 유제혁;류기형
    • 산업식품공학
    • /
    • 제14권3호
    • /
    • pp.193-201
    • /
    • 2010
  • 기존의 재래식 유탕팽화유과의 문제점을 개선하기 위하여 진공을 이용한 진공팽화기를 설계 제작하였다. 공정변수에 따른 진공팽화유과의 특성을 비교 분석하기 위하여 부피팽화율, 밀도, 절단강도, 색도, 미세구조를 측정하였다. 진공팽화기의 공정변수는 가열온도(100, 120, 140, 160, ${180^{\circ}C}$), 예열시간(0, 2, 4, 6, 8분), 진공팽화시간(5, 10, 15, 20분)이며, 가열온도 ${100^{\circ}C}$, 예열시간 6분, 진공팽화시간 10분에서 진공팽화유과의 부피팽화율은 10.04로 가장 높게 측정되었고, 밀도는 0.15 g/$cm^3$로 가장 낮게 측정되었지만, 부피팽화율 9.47, 밀도 0.16 g/$cm^3$으로 측정된 가열온도 120${^{\circ}C}$, 예열시간 4분, 진공팽화시간 5분에서의 진공팽화유과가 유탕유과의 외관 및 조직과 가장 유사하였다. 절단강도는 가열온도 ${100^{\circ}C}$, 예열시간 6분, 진공팽화시간 15분에서 140 g/$cm^2$로 가장 낮게 측정되었다. 색도는 예열시간과 진공팽화시간이 증가함에 따라 백색도가 증가하는 경향을 보였고, 황색도는 감소하는 경향을 보였으며, 적색도는 유의적 차이가 없었다. 진공팽화유과의 백색도(L값)가 유탕팽화유과보다 25정도 높았으며, 적색도(a값)와 황색도(b값)는 유의적 차이는 보이지 않았으며, 진공팽화유과의 미세구조는 가열온도 ${120^{\circ}C}$, 예열시간 4분, 진공팽화시간 5분에서 기공이 작고 균일하였다. 유탕팽화유과와 비교 시 절단강도는 유사하였으나, 부피팽화율은 낮았고, 밀도는 높았다. 셀이 균일하게 형성된 진공팽화의 미세구조와는 달리 유탕팽화유과의 미세구조는 표면과 내부층의 차이가 확인되었다. 진공팽화기의 최적 공정조건은 진공팽화유과의 품질을 고려 할 때, 가열온도 ${120^{\circ}C}$, 예열시간 4분, 진공팽화시간 5분으로 판단되었다.

보 개방에 의한 하도의 지형변화 과정 수치모의 분석(세종보를 중심으로) (Numerical analysis of morphological changes by opening gates of Sejong Weir)

  • 장창래;박태효;강태운;옥기영
    • 한국수자원학회논문집
    • /
    • 제54권8호
    • /
    • pp.629-641
    • /
    • 2021
  • 본 연구에서는 2차원 수치모형(Nays2DH)을 적용하여 금강에 건설된 세종보를 중심으로 보 개방 후에 홍수량 변화에 의한 하도의 지형변화 과정을 분석하였다. 이를 위해 부등류, 부정류(단일사상), 연속홍수사상을 수문특성을 반영한 흐름조건으로 수치모의를 수행하였다. 부등류 수치모의 조건은 유황에 따른 정상유량으로 상류단 경계조건을 가정하였다. 부정류와 연속홍수사상의 경우에는 실제 홍수사상들로부터 정규 수문곡선 (normalized hydrograph)을 산정 한 후, 시나리오에 따른 첨두유량으로 정규 수문곡선을 재구성하여 상류단 유량으로 가정하였다. 본 연구에서는 지형학적 변화를 정량적으로 평가하기 위해 하상기복지수(BRI)를 산정하여 시간에 따른 하상변동을 분석하였으며, 연구지역의 항공사진과 수치모의 결과를 정성적으로 비교하였다. 부등류 수치모의 결과, 각 유황별 유량이 증가하면 하폭 대 수심의 비는 감소하고, 사주의 이동속도는 증가하였다. 하상기복지수는 초기에는 증가하지만, 시간이 증가함에 따라 변화량이 작아졌다. 또한 유량이 증가하면 하상기 복지수가 증가했다. 부정류 수치모의 결과 사주의 이동속도는 유량의 변화에 따라 감소했다. 또한 첨두홍수에 대한 지형적 반응에서 시간지체(time lag)가 발생했다. 즉, 부정류에서는 하상고의 변화는 수리학적 조건에 대하여 위상지연(Phase lag) 이 나타났다. 연속홍수사상 발생에 의한 부정류 수치모의 결과에서는 각각 첨두홍수 발생에 따른 사주의 이동속도는 홍수발생이 반복됨에도 불구하고 급격하게 감소했다. 또한 부정류 수치모의 결과와 마찬가지로 위상지연이 나타났으며 사주의 이동속도는 지수적으로 감소하는 특성을 보였다. 하상기복지수는 시간경과에 따라 증가하였으나, 첨두홍수가 연속으로 발생하였음에도 불구하고 하상기복지수의 증가율은 완만하였다. 본 연구를 통해 하천의 수문특성을 반영한 지형변화 과정을 수치모의를 수행하여 분석하였으며, 이를 통해 흐름특성에 따른 하상변동의 정량적인 예측모의를 현장에 적용할 수 있는 방법을 제시할 수 있을 것으로 판단된다.

플라즈마 블라스팅, 공압파쇄, 진공추출이 활용된 지중 토양정화공법의 정화 개선 효과에 대한 실증연구 (An Empirical Study on the Improvement of In Situ Soil Remediation Using Plasma Blasting, Pneumatic Fracturing and Vacuum Suction)

  • 송재용;이근춘;강차원;김은섭;장현식;장보안;박유철
    • 지질공학
    • /
    • 제33권1호
    • /
    • pp.85-103
    • /
    • 2023
  • 점토와 같은 세립질 또는 유기물을 다량으로 함유하거나 다져진 지층을 대상으로 지중(in-situ) 정화를 진행하는 경우, 정화효율이 떨어져 정화비용이 증가하는 등의 한계가 발생한다. 또한, 토양조건이 양호하더라도 균일하지 않은 토질특성과 낮은 투수특성으로 인해 장기간에 걸쳐 정화를 수행하여 완료되는 것이 일반적이다. 본 연구는 기존 지중정화의 한계를 개선하기 위한 방법으로 공압파쇄, 진공추출, 플라즈마 블라스팅을 접목한 기술(PPV공법)의 정화효과 확인과 현장 적용성을 평가하고자 수행하였다. 상대적인 비교를 위하여 본 연구에 적용된 기술을 실험군으로 하고 기존 공법인 화학적산화공법을 대조군으로 하여 TPH로 오염된 토양에서80일에 걸쳐 각각 지중정화를 수행하였으며, 총 4차에 걸쳐 모니터링 시료를 채취하여 정화효과를 비교 평가하였다. 모니터링 결과, 대조군은 정화제 전달효과가 불량하여 오염도의 감소 경향성을 보이지 않는 반면 실험군(PPV공법) 적용에서는 정화시간이 경과함에 따라 뚜렷한 오염도 저감효과가 나타난다. 주입정으로부터 거리별 TPH 최고농도 저감율을 평가하면, 대조군은 경향성이 없으나 PPV공법은 주입정 반경 1 m 이내에서는 62.6%, 1.1~2.0 m에서 90.1%, 2.1~3.0 m에서 92.1%의 정화효과를 보인다. 주입정으로부터 거리별 TPH 평균농도 저감율을 평가하면, 대조군은 실질적인 정화효과가 없으나 PPV공법은 주입정 반경 1 m 이내에서는 53.6%, 1.1~2.0 m에서 82.4%, 2.1~3.0 m에서 68.7%의 정화효과가 확인되었다. TPH 최대 및 평균 오염농도의 변화를 토대로 실험군과 대조군의 정화효율을 평가한 결과, PPV공법은 대조군 대비 149.0~184.8%의 정화효과가 상승하는 것으로 평가할 수 있으며 평균 정화효과 상승률은 약167%이다. 시간경과에 대한 TPH 농도를 분석을 통해 상관관계식을 도출하고 이를 활용하여 최초 농도 대비 80% 저감기간을 평가한 결과 PPV공법을 적용하는 경우 화학적산화공법 적용시보다 184.4%의 정화시간 단축이 가능할 것으로 평가되었다. 다만, 단일 부지에 대한 평가 결과이기 때문에 모든 지층에 동일하게 적용될 수 없으므로 향후 이에 대한 추가적인 연구를 수행하여 그 효과를 보다 면밀히 검토할 필요가 있다.

기후변화에 따른 도시하천의 야생조류 서식환경 변화 연구 - 탄천 생태·경관보전지역를 사례로 - (A Study on Changes in Habitat Enviroment of Wild Birds in Urban Rivers according to Climate Change - A Case Study of Tancheon Ecological and Landscape Conservation Area -)

  • 한정현;한봉호;곽정인
    • 한국조경학회지
    • /
    • 제52권2호
    • /
    • pp.79-95
    • /
    • 2024
  • 본 연구의 목적은 생태적 기능이 크게 요구되는 보호지역의 도시하천에서 기후변화로 나타나는 야생조류 서식환경변화를 알아보고자 하였다. 앞으로 도시하천 생태계를 보호하고 생물다양성을 위한 지속가능한 도시하천의 건강성을 유지할 수 있는 관리지표로 활용되고자 하였다. 대상지로 선정한 탄천 생태·경관보전지역은 기후변화의 영향을 받고 있었다. 우리나라 사계절은 뚜렷한 온대성기후이나 서울 연평균기온은 40년간 2.4-2.8℃ 상승하였다. 겨울철기온이 점차 상승하는 경향이었다. 6-8월에 집중되었던 강수량은 현재는 국지성 집중호우와 여러 달의 균일한 강수 패턴으로 변하고 있었다. 기후변화는 불규칙적이고 비예측적으로 불확실한 특성을 보여주고 있다. 불확실성을 가진 기후변화는 도시 하천생태계에 다양한 영향으로 나타났다. 수면과 퇴적지 면적 감소는 하천 형태 변화와 육역화로 진행되었다. 식물은 교란과 식생 단순화로 나타났다. 국가 기후변화생물 지표종 출현, 외래목본식물 발달, 건조지성 자생초본식물종 변화와 습윤지성 식생이 발달되었다. 야생조류는 겨울철 여름철새의 출현, 철새의 텃새화로 나타났다. 또한 철새의 종 변화와 개체수 감소도 일어났다. 불규칙성과 비예측적 특성의 기온과 강수량 변동은 하천생태계를 연결하는 수문환경, 식물생태, 야생조류에 직·간접적 영향을 주고 있음이 판단되었다. 본 연구의 결과는 기후변화가 야생조류 서식환경에 어떤 영향을 주는지에 대해 분석하여 도시 내 환경·생태적 기능이 작동할 수 있는 하천 생태·경관보전지역 관리지표로 활용되고자 하였다. 향후 도시하천의 건강성 향상과 생물 다양성 기반조성을 위한 생태계서비스 차원의 기초연구로 참고할 가치가 높을 것으로 판단되었다.