• The Journal of Korean Physical Therapy
• /
• v.32 no.6
• /
• pp.348-353
• /
• 2020

Purpose: This study examined the comparison of effects of non-surgical continuous and intermittent traction on pain, balance and physical function in the treatment of knee osteoarthritis. Methods: A total of 30 knee osteoarthritis patients were recruited and randomized to a continuous traction group (n=10), an intermittent traction group (n=10), and a control group (n=10). The continuous traction group and intermittent traction group received a non-surgical continuous and intermittent knee joint traction workout five times a week, for 4 weeks. All subjects were assessed with the numeric rating scale (NRS), timed up and go test (TUGT), and Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) before and after the 4-week treatment. Results: As a result of comparison within groups, the continuous traction group, intermittent traction group, and control group showed a significant difference for NRS, TUGT, and WOMAC after the experiment (p<0.05). According to the comparison of the three groups, the continuous traction group showed a more effectively significant difference than the intermittent traction group and the control group in the balance and physical functions before and after the experiment (p<0.05). Conclusion: This study showed that non-surgical continuous traction treatment was effective in improving pain, balance ability, and physical function in knee osteoarthritis patients.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.144-150
• /
• 2001

Considered is non-symmetric contact traction induced by the tilting of a contact body and/or by a far field bulk tensile load to the other body. The problem is under the regime of plane strain. General profile of the contact end is incorporated and partial slip condition is supposed. As an example contact configuration, an indentation of a punch with rounded corners onto a half plane is studied. The variation of the internal stress field due to the tilting and the bulk tension is investigated. An edge crack problem is analyzed to examine the influence of the non-symmetric traction. It is shown that the tilting of a punch does not influence the behaviour of the crack. Rather, the effect of the bulk tension on the cracking behaviour is found considerable.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.10a
• /
• pp.36-39
• /
• 2000

This paper presents the technology of condition diagnosis & life estimation on insulation system of the traction motor. In the non-destructive methods for diagnosis of coil insulation state, residual dielectric strength is estimated by the D-map which consist of the partial discharge quantity Q and average degradation degree $\Delta$. In the operating history of machine, the N-Y life estimation method is based on the stop-starting numbers and operating times with considering each degradation factor by the thermal, electrical and heat-cycle stress. With the on-line conditioning monitoring on the currents of traction motors, detecting the abnormal operating state due to bearing faults, stator or armature faults, eccentricity related faults and broken rotor bars can be performed.

• Physical Therapy Korea
• /
• v.3 no.3
• /
• pp.12-23
• /
• 1996

The purpose of this research is to identify traction effects for the treatment of scoliosis and compare the effects among patients as their own physical characters. In this research, the patients with scoliosis hospitalized for ten days have treated in the way of the static traction for twenty hours a day, and alternating lumbar and cervical traction for twenty minutes two times a day in the department of rehabilitaton of Yong-Dong Severance Hospital. The followings are the conclusions of this research: 1) The traction for the patients with scoliosis is effective treatment method to reduce the curved angle (p<0.001). 2) Statistically there is no significant difference of the reduced curved angle between male and female after the traction (P>0.05). 3) Statistically there is significant difference of the reduced curved angle among age groups after the traction (P<0.05). 4) Statistically there is significant difference of the reduced curved angle among curved angle groups after the traction (p<0.001). 5) Statistically there is no significant difference of the reduced curved angle among shapes of curved angle after the traction (P>0.05).

• Journal of Electrical Engineering and Technology
• /
• v.8 no.1
• /
• pp.118-123
• /
• 2013

This paper presents performance comparison between concentrated winding and distributed winding of IPMSM (Interior Permanent Magnet Synchronous Motors) which is recently used for light-weight railway applications. Motors are designed on various schemes and analyzed by using FEM (Finite Element Method) instead of EMCNM (Equivalent Magnetic Circuit Network Method) in order to take into account saturation and non-linear magnetic property. The overall performance such as torque, torque ripple, losses, demagnetization, efficiency, power density and so on are investigated in detail at the rated and maximum operating speed. The results of the analysis found that both concentrated and distributed winding IPMSMs are promising candidates for high power railway traction motor.

• Journal of Biomedical Engineering Research
• /
• v.35 no.2
• /
• pp.19-25
• /
• 2014

According to recent data more than 80% of people suffer from back pain, due to an aging and a poor posture, at least once in their life time, and 7~10% of them have chronic spine illness. Researchers over the years have studied on various spinal traction devices that utilize the force of traction, and have also reported clinical test results. However, most existing devices are too complicated and too expensive. In order to solve these problems, we have developed a new device in which the frame moves up and down and at the same time tilting angle of the frame is adjusted. We have analyzed the forces applied on the body as a function of tilting angle. And the result shows that the new device has achieved the force of traction, which is known to be effective for spinal rehabilitation.

• Journal of Korean Foot and Ankle Society
• /
• v.17 no.4
• /
• pp.288-293
• /
• 2013

Purpose: Number of arthroscopic surgery is gradually increasing with development of its equipment and technique. Arthroscopic ankle surgery performed with the traction device has various complications and need more time for preparation. We investigated whether the complication rate increased when surgery was performed without the traction device, and compared the complication rate of arthroscopic surgery with the traction device. Materials and Methods: From January 2009 to June 2012, arthroscopic ankle surgery was performed without the traction device in four hundred eleven cases. There were two hundred sixty-one males and one hundred fifty females. The average age at operation was 35 years (range, 17-56), and the average follow up period was 28 months (range, 12-41). Postoperative symptoms and complications were checked. Results: There were difficulties performing arthroscopic surgery without the traction device in five cases with severe traumatic osteoarthritis. However, after burring and shaving, we had enough space to work on. Superficial peroneal nerve symptom was found in two cases, grooving of talus was found in 11, and saphenous vein injury was found in five. Since preparing for the traction device was unnecessary, we were able to save time with the mean duration of surgery of 50 minutes (range, 30-120). Conclusion: With only manual traction, we could explore the entire ankle joint without damage on cartilage. Yet, skilled arthroscopic technique will be necessary for arthroscopic surgery without the traction device.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.11
• /
• pp.1919-1924
• /
• 2016

In general, Diode rectifier has been applied to DC traction power supply system. Diode has some characteristics which is voltage drop in inverse proportion of load because of non-controlled switch, and cannot flow a current in reverse bias. So, voltage drop occurs frequently, and regenerated power cannot use in substation. The PWM rectifier is able to control output voltage constantly to reduce voltage drop and to use regeneration power without additional inverter. This paper proposes analysis algorithm for DC traction power supply system with PWM rectifier.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.518-521
• /
• 2003

A new measurement system was developed by fault diagnosis system for traction motor using current signal analysis. The motor current signature analysis method is used for traction motor fault diagnosis. The diagnosis system program is constructed by artificial neural networks algorithm, those results from the program are used to train neural networks. The trained neural networks have the ability to compute adaptive results for non-trained inputs, and to calculate very fast due to original parallel structure of neural networks with high accuracy within destined tolerance. This system suggested that available test for checking, the probable extent of aging, and the rate of which aging is taking place.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.1
• /
• pp.38-46
• /
• 1992

An optimal design technique for minimum power loss in Kopp Ball Variator Continuously Variable Transmission is developed. Kinematic analysis of traction drive contact is performed to find spin for Kopp Ball Variator, and traction force and torque are calculated from mathem atical model of traction drive contact. The objective function for optimal design is total power loss including contact loss and bearing losses. The design contraints are derived from energy balance for input and output power. The formulated optimal design problem is implemented to a non-linear programming algorithm to find minimum power loss. The performance of optimal ly designed Kopp Ball Variator shows that efficiency is increased about 5-10% compare to a commercial unit.