• 제목/요약/키워드: Non-regular design

검색결과 106건 처리시간 0.026초

Identification of progressive collapse pushover based on a kinetic energy criterion

  • Menchel, K.;Massart, T.J.;Bouillard, Ph.
    • Structural Engineering and Mechanics
    • /
    • 제39권3호
    • /
    • pp.427-447
    • /
    • 2011
  • The progressive collapse phenomenon is generally regarded as dynamic. Due to the impracticality of nonlinear dynamic computations for practitioners, an interest arises for the development of equivalent static pushover procedures. The present paper proposes a methodology to identify such a procedure for sudden column removals, using energetic evaluations to determine the pushover loads to apply. In a dynamic context, equality between the cumulated external and internal works indicates a vanishing kinetic energy. If such a state is reached, the structure is sometimes assumed able to withstand the column removal. Approximations of these works can be estimated using a static computation, leading to an estimate of the displacements at the zero kinetic energy configuration. In comparison with other available procedures based on such criteria, the present contribution identifies loading patterns to associate with the zero-kinetic energy criterion to avoid a single-degree-of-freedom idealisation. A parametric study over a family of regular steel structures of varying sizes uses non-linear dynamic computations to assess the proposed pushover loading pattern for the cases of central and lateral ground floor column failure. The identified quasi-static loading schemes are shown to allow detecting nearly all dynamically detected plastic hinges, so that the various beams are provided with sufficient resistance during the design process. A proper accuracy is obtained for the plastic rotations of the most plastified hinges almost independently of the design parameters (loads, geometry, robustness), indicating that the methodology could be extended to provide estimates of the required ductility for the beams, columns, and beam-column connections.

분산형 저류지 생태환경복원 설계 - 신정3지구 생태환경저류지에 적용된 생태적수질정화비오톱(SSB)시스템을 중심으로 - (A Design for Ecological and Environmental Restoration of a Dispersal Detention System - a Case of Sustainable Structured wetland Biotop (SSB) System Applied to Ecological and Environmental Detention in the Housing District of Sinjeong 3-jigu -)

  • 변찬우
    • 한국환경복원기술학회지
    • /
    • 제16권1호
    • /
    • pp.181-191
    • /
    • 2013
  • The design process of ecological and environmental detention system located in the housing district of Sinjeong 3-jigu in Seoul are as follows. At stage one, a new dispersal detention was created in the neighborhood park located near the originally planned detention. From this, the amount of storage of this dispersal detention system was enlarged from $28,337m^3/d$, the initial storage amount, to $33,606m^3/d$ as the post storage amount, responsible to the amount of rainfall which happens every 100 years. In particular, the SSB (Sustainable Structured wetland Biotop) system, which was the New Excellent Technology verified by the Ministry of Environment (No. 258) was applied to enhance ecological functioning and water quality with the detention as a constructed wetland. At stage two, the treatment plans for non-point pollutant source occurred at the initial period of rain, flowing into the detention system were built for purifying the water of the retention pond at the base of the detentions, and the water-circulation system was designed at the dispersal detentions on the period of regular rainfalls. The non-point pollutant source flowing into detention site was calculated as $11,699m^3/d$ flowing down from seven small watersheds, which occurred at the initial period of rain. In particular the SSB systems improved the average efficiency of the water processing performance to BOD 60%, SS 90%, T-N 30%, T-P 60%. At stage three, the ecological network and biological diversity were strongly considered so that it brought the residents with amenity places. In particular, the dispersal detentions were successfully designed to restore the ecological habitat of endangered plant and animal species such as narrow-mouthed.

현대예술 확장에 의해 예술로 수용된 패션의 본질적 속성 (Inherent Properties of Fashion Accepted as Art through Expansion of Contemporary Art)

  • 서승희;김영인
    • 복식
    • /
    • 제63권6호
    • /
    • pp.84-96
    • /
    • 2013
  • In researching the ontological status of fashion, a good grasp of fashion can decide the direction of fashion study. Fashion is sometimes considered an area of industry far from art from a point of view of purity of art, in spite of its aesthetic value and expression. However, art properties can be differentiated from the purity of art in modern aesthetics, and fashion properties which were the reason for that fashion to be considered as non-art can be affirmed as the same with properties of contemporary art properties. Therefore, the purpose of this study was to suggest the possibility that general properties of fashion can be accepted in the art arena through justifying art properties deviating from the purity of art. It can provide a boost to fashion's cultural status. For the research method, a literature review and case analysis were carried out through specialty publications related to art history, aesthetics, and fashion, regular publications and websites specializing in fashion, and art museums. Through the research, art properties deviated from the purity of art, which are; tactile sense, impermanence, dailiness, and commercial viability, were justified as being the same as fashion properties. These art properties were not general properties of fine art in modern aesthetics, but the ones occurring in contemporary arts. These properties, now present in contemporary art, can no longer disqualify fashion as a non-art.

펌프카의 붐대 결함에 의한 사고원인과 방지대책 (Causes of accidents and preventive measures due to defects in pump car booms)

  • 조춘환
    • 한국건설안전학회 논문집
    • /
    • 제6권1호
    • /
    • pp.7-11
    • /
    • 2024
  • 펌프카는 콘크리트를 타설하는 장소에 필요한 만큼 운반하는 장비로, 짧은 시간에 많은 양의 콘크리트 타설하기 위해서는 펌프카를 사용하는 것이 경제성 및 품질관리 측면에 가장 효율적이다. 그러나 최근에는 콘크리트 타설중에 붐 파손으로 인한 인명피해가 많이 발생하고 있으므로 본 연구에서는 장비 제작단계, 노후장비에 대한 검사기준, 장비대여제도 등의 개선이 필요함을 제언한다. 그 이유는 펌프카의 유한요소해석 결과, 붐 2단에서 작용하는 상당응력과 붐상단에서 최대응력이 895.39MPa로 나타났고, M.S. 0.04로 가장 낮게 평가되었으므로 보강의 필요성을 인식했다. 그리고 2단계 붐은 1~5단계 붐대 중 가장 스트레스가 많고, 취약한 부분임을 확인했다. 따라서 설계 및 제작 단계에서 부재의 두께와 강성을 높이고, 현재 사용되는 장비의 강판에 대한 보강이 필요하다. 또한, 일반 건설기계 전체에 대한 비파괴 검사를 의무적으로 반영하고, 비파괴검사 및 정기검사시 붐대 결함 누락에 대한 책임을 검사기관에 부담시키는 제도 구축이 시급하다.

표준화환자를 활용한 당뇨식이교육 동영상학습이 간호학생의 임상수행능력과 학습만족도에 미치는 효과 (Development of a Multimedia Learning DM Diet Education Program using Standardized Patients and Analysis of Its Effects on Clinical Competency and Learning Satisfaction for Nursing Students)

  • 현경선;강현숙;김원옥;박선희;이지아;석소현
    • 대한간호학회지
    • /
    • 제39권2호
    • /
    • pp.249-258
    • /
    • 2009
  • Purpose: The purpose of this study was to develop a multimedia learning program for patients with diabetes mellitus (DM) diet education using standardized patients and to examine the effects of the program on educational skills, communication skills, DM diet knowledge and learning satisfaction. Methods: The study employed a randomized control posttest non-synchronized design. The participants were 108 third year nursing students (52 experimental group, 56 control group) at K university in Seoul, Korea. The experimental group had regular lectures and the multimedia learning program for DM diet education using standardized patients while the control group had regular lectures only. The DM educational skills were measured by trained research assistants. Results: The students who received the multimedia learning program scored higher for DM diet educational skills, communication skills and DM diet knowledge compared to the control group. Learning satisfaction of the experimental group was higher than the control group, but statistically insignificant. Conclusion: Clinical competency was improved for students receiving the multimedia learning program for DM diet education using standardized patients, but there was no statistically significant effect on learning satisfaction. In the nursing education system there is a need to develop and apply more multimedia materials for education and to use standardized patients effectively.

Generalized complex mode superposition approach for non-classically damped systems

  • Chen, Huating;Liu, Yanhui;Tan, Ping
    • Structural Engineering and Mechanics
    • /
    • 제73권3호
    • /
    • pp.271-286
    • /
    • 2020
  • Passive control technologies are commonly used in several areas to suppress structural vibrations by the addition of supplementary damping, and some modal damping may be heavy beyond critical damping even for regular structures with energy dissipation devices. The design of passive control structures is typically based on (complex) mode superposition approaches. However, the conventional mode superposition approach is predominantly applied to cases of under-critical damping. Moreover, when any modal damping ratio is equal or close to 1.0, the system becomes defective, i.e., a complete set of eigenvectors cannot be obtained such that some well-known algorithms for the quadratic eigenvalue problem are invalid. In this paper, a generalized complex mode superposition method that is suitable for under-critical, critical and over-critical damping is proposed and expressed in a unified form for structural displacement, velocity and acceleration responses. In the new method, the conventional algorithm for the eigenvalue problem is still valid, even though the system becomes defective due to critical modal damping. Based on the modal truncation error analysis, modal corrected methods for displacement and acceleration responses are developed to approximately consider the contribution of the truncated higher modes. Finally, the implementation of the proposed methods is presented through two numerical examples, and the effectiveness is investigated. The results also show that over-critically damped modes have a significant impact on structural responses. This study is a development of the original complex mode superposition method and can be applied well to dynamic analyses of non-classically damped systems.

어린이 디자인 창의성 개발을 위한 D.I.Y 가구 만들기 프로그램 개발에 관한 연구 (A Study on Furniture Making Program Development for Children's Designing Creativity)

  • 김영주
    • 한국가구학회지
    • /
    • 제26권3호
    • /
    • pp.187-195
    • /
    • 2015
  • School activities which are opened after-school or during a vacation have been social issues as our society is nuclearized and both parents are working, so that elementary school students and middle school students are less taken care of and less concerned by their parents. It is regrettable that students are spending too much time on private academies in the situation where they cannot help but staying alone after school and where frantic fever of private education pervades their lives. For the sake of those students, the Ministry of Education announced, "Each school can open its after-school programs or vacation programs based on students and their parents' demands making it a rule of a student's voluntary participation. After school programs for elementary and middle school students are operated by local communities providing extra courses or programs in addition to regular classes. Those programs are paid by participants or supported by financial aids in order to decrease parents' burdens of costs of private education and to reduce educational gaps between rich and poor children or between the regions. After school programs are either curricular or non-curricular educational activities with students' voluntary participation, and the programs are meant to supplement and strengthen the role of public school education. Non-curricular courses that consist of various programs, in particular, are receiving good reputations by students and parents. Therefore, this study develops and operates "children's making D.I.Y. furniture" program that is one of non-curricular courses and an activity-oriented art program for children to improve their designing creativity and to help them experience their future jobs in advance. The purpose of this study is to analyze advantages and disadvantages of the program using survey and assessment methods and to find out a developmental direction focused on future-oriented and specialized educational programs for children.

Collapse response assessment of low-rise buildings with irregularities in plan

  • Manie, Salar;Moghadam, Abdoreza S.;Ghafory-Ashtiany, Mohsen
    • Earthquakes and Structures
    • /
    • 제9권1호
    • /
    • pp.49-71
    • /
    • 2015
  • The present paper aims at evaluating damage and collapse behavior of low-rise buildings with unidirectional mass irregularities in plan (torsional buildings). In previous earthquake events, such buildings have been exposed to extensive damages and even total collapse in some cases. To investigate the performance and collapse behavior of such buildings from probabilistic points of view, three-dimensional three and six-story reinforced concrete models with unidirectional mass eccentricities ranging from 0% to 30% and designed with modern seismic design code provisions specific to intermediate ductility class were subjected to nonlinear static as well as extensive nonlinear incremental dynamic analysis (IDA) under a set of far-field real ground motions containing 21 two-component records. Performance of each model was then examined by means of calculating conventional seismic design parameters including the response reduction (R), structural overstrength (${\Omega}$) and structural ductility (${\mu}$) factors, calculation of probability distribution of maximum inter-story drift responses in two orthogonal directions and calculation collapse margin ratio (CMR) as an indicator of performance. Results demonstrate that substantial differences exist between the behavior of regular and irregular buildings in terms of lateral load capacity and collapse margin ratio. Also, results indicate that current seismic design parameters could be non-conservative for buildings with high levels of plan eccentricity and such structures do not meet the target "life safety" performance level based on safety margin against collapse. The adverse effects of plan irregularity on collapse safety of structures are more pronounced as the number of stories increases.

고속 활주선의 선형에 따른 저항 성능 및 규칙파 중 운동 성능 고찰 (Effects of Hull Form Variations on Resistance and Seakeeping Performance of Planing Hulls with and without Incoming Regular Waves)

  • 김동진;김선영;김성환;서정화;이신형
    • 대한조선학회논문집
    • /
    • 제51권5호
    • /
    • pp.369-379
    • /
    • 2014
  • Planing hull forms have significant influences on those hydrodynamic performances in calm water and in waves. Therefore, the hydrodynamic performance of a planing vessel should be predicted by model tests or theoretical calculations, and be confirmed whether it shows the performance requirements at the design stage. In this study, four planing hull forms are designed with the goal of the improvement of resistance and seakeeping performance, and 1/6.5 scale model tests are carried out in Seoul National University towing tank. The effects of design parameters such as length-to-beam ratio, deadrise angle and forebody shape on the hydrodynamic performance are investigated, based on model test results. Running attitude and resistance of model ships in calm water are also estimated by empirical formulae proposed by Savitsky (1964; 2007; 2012), and compared with the model test results. It is shown that calm water performance of non-prismatic planing hulls can be predicted well by Savitsky (2012)'s formula which improves the original Savitsky(1964/2007)'s formula by taking into account the variations of deadrise angles, and the actual angles between the hull bottom and the free surface.

선호음악요법이 방광경시술시 불안, 통증 및 만족도에 미치는 효과 (The Effect of a Preference Music Therapy on Anxiety and Pain of Cystoscopy)

  • 이지민;홍해숙
    • Journal of Korean Biological Nursing Science
    • /
    • 제13권1호
    • /
    • pp.44-52
    • /
    • 2011
  • Purpose: The purpose of this study was to examine the effects of a preference music therapy on anxiety and pain of cystoscopy. Methods: This study was performed using the quasi-experimental study design with non-equivalent control group pre-test and post-test. Total of 76 adult clients admitted to a tertiary hospital located in Daegu, South Korea were selected by convenience sampling 19 in the control and 57 in the experimental group. The data were analyzed by $x^2$, t-test, paired t-test, and repeated measures ANOVA using SPSS 17.0. Results: Implementing a preference music therapy was found to be effective in reducing anxiety level before cystoscopy in the present study. However, there were no significant effects of this preference music therapy in reducing pain and anxiety during cystoscopy. In addition, there were no significant effects of a preference music therapy on the patients' satisfaction of the anxiety, discomfort, and pain relieving. Conclusion: The findings support that implementing a preference music therapy may reduce anxiety before the cyctoscopy procedure. Therefore, it can be suggested that a preference music therapy needs to be consider-ed as a regular nursing intervention to reduce patient anxiety level before cystoscopy.