• Structural Engineering and Mechanics
• /
• 제75권6호
• /
• pp.701-711
• /
• 2020

This papers studies nonlinear stability and post-buckling behaviors of geometrically imperfect metal foam doubly-curved shells with eccentrically stiffeners resting on elastic foundation. Metal foam is considered as porous material with uniform and non-uniform models. The doubly-curved porous shell is subjected to in-plane compressive loads as well as a transverse pressure leading to post-critical stability in nonlinear regime. The nonlinear governing equations are analytically solved with the help of Airy stress function to obtain the post-buckling load-deflection curves of the geometrically imperfect metal foam doubly-curved shell. Obtained results indicate the significance of porosity distribution, geometrical imperfection, foundation factors, stiffeners and geometrical parameters on post-buckling characteristics of porous doubly-curved shells.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제22권4호
• /
• pp.217-239
• /
• 2018

This paper examined the MHD and thermal behavior of unsteady mixed convection flow of a rotating fluid in a porous parallel plate channel in the presence of Hall current and heat source. The exact solutions of the concentration, energy and momentum equations are obtained. The influence of each governing parameter on non dimensional velocity, temperature, concentration, skin friction coefficient, rate of heat transfer and rate of mass transfer at the porous parallel plate channel surfaces is discussed. During the course of numerical computation, it is observed that as Hall current parameter and Soret number at the porous channel surfaces increases, the primary and secondary velocity profiles are increases while the primary and secondary skin friction coefficients are increases at the cold wall and decreases at the heated wall. In particular, it is noticed that a reverse trend in case of heat source parameter.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권1호
• /
• pp.109-119
• /
• 2015

최근 수십년간의 산업발달 및 인구증가에 따라 산업폐수 및 각종 비점오염원의 유입으로 수질오염이 심각한 실정이다. 이에 대해 국내 및 국외에서 이에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 유기물질의 분해효과가 있는 유용미생물과 포러스콘크리트를 이용하여 하천 현장에 설치하여 구조적 성능평가와 장기간 수질정화능력을 평가하였다. 구조적 성능평가 결과, 시험체의 공극률은 15%가 적절하다고 판단되며, 또한 수질정화성능 검토 결과 각항목에 대한 제거율은 SS 34.1%, BOD 14.6%, COD 34.9%, T-N 11.4%, T-P 12.6%를 나타냈다. 따라서 유용미생물을 이용한 포러스콘크리트의 현장적용시 수질을 정화시키는데 효과적이라고 판단된다.

• 대한화학회지
• /
• 제29권3호
• /
• pp.233-238
• /
• 1985

비다공성 및 다공성 폴리스티렌 디비닐벤젠 공중합체를 합성하고, 이것을 클로로메틸화 한후, 메틸아민으로 아미노화하여 약염기성 음이온교환수지인, 50∼100mesh의 비다공성, N-APSTDVB와 다공성, P-APSTDVB를 만들었다. 합성한 이들 음이온교환수지를 적외선 흡수스펙트럼으로 확인하였다. 이들 음이온교환수지의 최대 이온교환용량은 4.86meq/g이었다. 다공성 폴리스티렌 디비닐벤젠 공중합체, P-APSTDVB의 세공용적은, 디비닐벤젠의 볼륨퍼센트를 30%로 하였을 때, X$_{diluent}$의 증가에 따라서 증가하였다. 또한 X$_{diluent}$의 양을 0.5로 일정하게 하였을때, P-APSTDVB공중합체의 세공용적은, 디비닐벤젠의 볼륨퍼센트가 증가함에 따라 증가하였다. 디비닐벤젠의 퍼센트를 8%로 일정하게 하고, X$_{heptane}$을 0.5로 하였을 때, 합성한 공중합체와 음이온교환수지의 세공용적은, P-PSTDVB >P-APSTDVB >N-PSTDVB순으로 감소하였다. 여러 농도하에서의, 여러종류의 알코올 수용액중에서의 N-APSTDVB음이온교환수지에 대한 붕산의 분포계수가, 또한 논의되었다.

• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.123-130
• /
• 2016

OBJECTIVES : The objective of this research is to determine the moisture resistance of the freeze-thaw process occurring in low-noise porous pavement using either hydrated-lime or anti-freezing agent. Various additives were applied to low-noise porous asphalt, which is actively paved in South Korea, to overcome its disadvantages. Moreover, the optimum contents of hydrated-lime and anti-freezing agent and behavior properties of low-noise porous asphalt layer are determined using dynamic moduli via the freeze-thaw test. METHODS : The low-noise porous asphalt mixtures were made using gyratory compacters to investigate its properties with either hydrated-lime or anti-freezing agent. To determine the dynamic moduli of each mixture, impact resonance test was conducted. The applied standard for the freeze-thaw test of asphalt mixture is ASTM D 6857. The freeze-thaw and impact resonance tests were performed twice at each stage. The behavior properties were defined using finite element method, which was performed using the dynamic modulus data obtained from the freeze-thaw test and resonance frequencies obtained from non-destructive impact test. RESULTS : The results show that the coherence and strength of the low-noise porous asphalt mixture decreased continuously with the increase in the temperature of the mixture. The dynamic modulus of the normal low-noise porous asphalt mixture dramatically decreased after one cycle of freezing and thawing stages, which is more than that of other mixtures containing additives. The damage rate was higher when the freeze-thaw test was repeated. CONCLUSIONS : From the root mean squared error (RMSE) and mean percentage error (MPE) analyses, the addition rates of 1.5% hydrated-lime and 0.5% anti-freezing agent resulted in the strongest mixture having the highest moisture resistance compared to other specimens with each additive in 1 cycle freeze-thaw test. Moreover, the freeze-thaw resistance significantly improved when a hydrated-lime content of 0.5% was applied for the two cycles of the freeze-thaw test. Hence, the optimum contents of both hydrated-lime and anti-freezing agent are 0.5%.

• 한국건축시공학회지
• /
• 제17권5호
• /
• pp.403-409
• /
• 2017

본 연구에서는 다공성 블록의 내구성 향상을 위해 압축강도 3MPa 및 공극률 30%를 만족하는 배합설계를 확인하였으며, 선정된 배합에서 GFRP 보강 방법에 따른 보의 내력 및 인성 증가를 평가하였다. 다공성 콘크리트의 목표성능 만족을 위해서는 골재입도 15~20mm에서 물-시멘트 비 및 시멘트-골재 비가 각각 25% 및 15%로 추천될 수 있었다. GFRP로 보강된 다공성 콘크리트 보의 거동은 전단파괴에 의해 지배되었다. 이에 따라 GFRP의 휨 저항 발휘는 매우 적었으며, GFRP 보강근의 장부작용에 의한 전단내력상승은 결과적으로 다공성 콘크리트 보의 하중 저항성과 인성을 향상시켰다. GFRP 보강근을 압축과 인장측에 각각 1본(D9)씩 배근한 경우 내력은 무보강 보에 비해 약 2.1배 증가하였으며, 인성지수 $I_{30}$값은 43.4를 보임으로서 인성지수 값을 측정할 수 없었던 무보강 보에 비해 상당히 향상되었다.

• 대한화학회지
• /
• 제29권2호
• /
• pp.144-150
• /
• 1985

스티렌과 디비닐벤젠을 이용한 공중합체의 합성에 희석제로서 헵탄과 톨루엔을 사용하여 다공성 및 미세구조에 미치는 영향을 조사하였다. 스티렌디비닐벤젠 공중합체를 아미노화하여 음이온 교환수지를 합성하였으며 이 수지의 이온교환용량과 알코올 수용액에서 붕산에 대한 분포계수 값을 구하였고 이온교환 크로마토그래피와 질량분석기를 이용하여 붕소의 동위원소 분리효과를 연구하였다.

• 동력기계공학회지
• /
• 제17권6호
• /
• pp.63-72
• /
• 2013

The main purpose of this study is to analyze the collection characteristics of multi-layer multi-stage porous plate system with ionizer and dielectric-substance experimentally. The experiment is carried out to analyze the characteristics of pressure drop and collection efficiency for the present system with experimental parameters such as applied voltage, inlet velocity, stage number and inlet particle concentration, etc. In results, for multi-layer multi-stage porous plate system of inflow type, at 5 stage and $v_{in}$=2.58 m/s, the pressure drop becomes lower 15 $mmH_2O$ as 95 $mmH_2O$ than that of non-inflow type system. It is estimated that for the present system with ionizer and dielectric-substance, the collection efficiency represents 98.5% showing higher 5.2% comparing to that of multi-layer multi-stage porous plate system without ionizer and dielectric-substance at 5 stage, $v_{in}$=2.58 m/s and inlet concentration $3g/m^3$(fly ash).

• Current Photovoltaic Research
• /
• 제1권2호
• /
• pp.90-96
• /
• 2013

We report here flexible dye-sensitized solar cells (DSSC) based on Ti-mesh electrodes that show good mechanical flexibility and electrical conductivity. $TiO_2$ nanotube arrays prepared by electrochemical anodizing Ti-mesh substrate were used as photoanode. A Pt-coated Ti-mesh substrate was used as counter electrode. The photoanodes were modified by coating a $TiO_2$ porous layer onto the $TiO_2$ nanotubes in order to increase the specific surface area. To increase the long term stability of the DSSCs, a gel type electrolyte was used instead of a conventional liquid type electrolyte. The DSSC based on $33.2{\mu}m$ long porous $TiO_2$ nanotubes exhibited a better energy conversion efficiency of ~2.33%, which was higher than that of the DSSCs based on non-porous $TiO_2$ nanotubes.

• Korean Chemical Engineering Research
• /
• 제57권2호
• /
• pp.185-197
• /
• 2019

Deactivation of porous photocatalytic materials was studied using three types of microstructured particles: macroporous titania particles, titania microspheres, and porous silica microspheres containing CNTs and $TiO_2$ nanoparticles. All particles were synthesized by emulsion-assisted self-assembly using micron-sized droplets as micro-reactors. During repeated cycles of the photocatalytic decomposition reaction, the non-dimensionalized initial rate constants (a) were estimated as a function of UV irradiation time (t) from experimental kinetics data, and the results were plotted for a regression according to the exponentially decaying equation, $a=a_0\;{\exp}(-k_dt)$. The retardation constant ($k_d$) was then compared for macroporous titania microparticles with different pore diameters to examine the effect of pore size on photocatalytic deactivation. Nonporous or larger macropores resulted in smaller values of the deactivation constant, indicating that the adsorption of organic materials during the photocatalytic decomposition reaction hinders the generation of active radicals from the titania surface. A similar approach was adopted to evaluate the activation constant of porous silica particles containing CNT and $TiO_2$ nanoparticles to compare the deactivation during recycling of the photocatalyst. As the amount of CNTs increased, the deactivation constant decreased, indicating that the conductive CNTs enhanced the generation of active radicals in the aqueous medium during photocatalytic oxidation.