Journal of the Korea Institute of Building Construction (한국건축시공학회지)

The Korean Institute of Building Construction (한국건축시공학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of Load Capacity and Toughness of Porous Concrete Blocks Reinforced with GFRP Bars

GFRP 보강 다공성 콘크리트 블록의 내력 및 인성 평가

  • Jung, Seung-Bae (Department of Architectural Engineering, Kyonggi University Graduate School) ;
  • Yang, Keun-Hyeok (Department of Plant.Architectural Engineering, Kyonggi University)
  • Received : 2017.06.07
  • Accepted : 2017.09.26
  • Published : 2017.10.20
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, mix proportioning of porous concrete with compressive strength and porosity exceeding 3MPa and 30%, respectively, was examined and then load capacity and flexural toughness of the porous concrete block were evaluated according to the different arrangements of the GFRP bars. To achieve the designed requirements of porous concrete, it can be recommended that water-to-cement ratio and cement-to-coarse aggregate ratio are 25% and 20%, respectively, under the aggregate particle distribution of 15~20mm. The failure mode of porous concrete blocks reinforced with GFRP bars was governed by shear cracks. As a result, very few flexural resistance of the GFRP was expected. However, the enhanced shear strength of porous concrete due to the dowel action of the GFRP bars increased the load capacity and toughness of the blocks. The porous concrete blocks reinforced with one GFRP bar at each compressive and tensile regions had 2.1 times higher load capacity than the companion non-reinforced block and exhibited a high ductile behavior with the ultimate toughness index ($I_{30}$) of 43.4.

본 연구에서는 다공성 블록의 내구성 향상을 위해 압축강도 3MPa 및 공극률 30%를 만족하는 배합설계를 확인하였으며, 선정된 배합에서 GFRP 보강 방법에 따른 보의 내력 및 인성 증가를 평가하였다. 다공성 콘크리트의 목표성능 만족을 위해서는 골재입도 15~20mm에서 물-시멘트 비 및 시멘트-골재 비가 각각 25% 및 15%로 추천될 수 있었다. GFRP로 보강된 다공성 콘크리트 보의 거동은 전단파괴에 의해 지배되었다. 이에 따라 GFRP의 휨 저항 발휘는 매우 적었으며, GFRP 보강근의 장부작용에 의한 전단내력상승은 결과적으로 다공성 콘크리트 보의 하중 저항성과 인성을 향상시켰다. GFRP 보강근을 압축과 인장측에 각각 1본(D9)씩 배근한 경우 내력은 무보강 보에 비해 약 2.1배 증가하였으며, 인성지수 $I_{30}$값은 43.4를 보임으로서 인성지수 값을 측정할 수 없었던 무보강 보에 비해 상당히 향상되었다.

Keywords

References

  1. Park SB, Cho YS, Kim JH. An experimental study on physical mechanical properties and application of porous concrete using fly ash and silica fume. Journal of the Korean Society of Civil Engineers. 2002 Nov;22(6):1391-400.
  2. Seoul metropolitan government [Internet]. Seoul wiki [updated 2016 July 15]. Available from:http://yesan.seoul.go.kr/wk/wkSelect.do?itemId=86349&tr_code=sweb.
  3. Park JS, Kim BK, Kim WS, Seo DS, Kim WJ. Investigation on water purification effect through long-term continuous flow test of porous concrete using effective microorganisms. Journal of the Korea Concrete Institute. 2014 Apr;26(2):219-27. https://doi.org/10.4334/JKCI.2014.26.2.219
  4. Kim MH, Kim GY, Baik YK, Kim, JH. Influence of mix factors and mixing ratio of aggregate on the strength and water permeability of porous concrete. Journal of the Korean Concrete Institute. 2000 Dec;12(6):91-8.
  5. Takahisa O, Naoki M, Jung YU. Preparation of porous concrete. Magazine of the Korea Concrete Institute. 2000 Sep;12(5):29-32. https://doi.org/10.22636/MKCI.2000.12.5.29
  6. Lim SH, Kang HS, Jee NY. Study on the properties of porous concrete according to the aggregate shape and size. Journal of the Korea Institute for Structural Maintenance and Inspection. 2005 Jul;9(3):93-100.
  7. Jung YS. Properties and applications porous concrete. Journal of the Korea Ready Mixed Concrete Industry Association. 1998 Oct;10(57):23-31.
  8. Sung CY, Kim TH. Engineering properties of permeable polymer concrete for pavement using powdered waste glass and recycled coarse aggregate. Journal of the Korean Society of Agricultural Engineers. 2011 Nov;53(6):59-65. https://doi.org/10.5389/KSAE.2011.53.6.059
  9. Son BL, Kim MS, Kim CH, Jang HS. Bond characteristic between lightweight concrete and GFRP bar. Journal of Korean Institute for Structural Maintenance and Inspection. 2013 Nov;17(6):112-21.
  10. Alireza J, Ali AR, Mohammad J. Mechanical characteristic of pervious concrete considering the gradation and size of coarse aggregates. Journal of Environmental and Earth Sciences. 2014 Sep;6(9):437-42.
  11. Joshi T, Dave U. Evaluation of strength, permeability and void Ratio of pervious concrete with changing W/C ratio and aggregate size. Journal of Civil Engineering and Technology. 2016 Jul;7(4):276-84.
  12. Korean Industrial Standards. Standard test methoda for making and curing concrete specimens. Eumseong (Korea): Korean Standards Association; 2005. 18 p.
  13. Korean Industrial Standards. Standard test method for compressive strength of concrete. Eumseong (Korea): Korean Standards Association; 2010. 12 p.
  14. Tarnai M. Mizuguchi H. Hatanaka S, Katahira H, Nakazawa T, Yanagibashi K, Kunieda M. Design, construction and recent applications of porous concrete in japan. In : Ken Day, Hoe peng Lim, Teng Hooi Tan, Desmond King. Our World in Concrete & Structures; 2003 Aug 28-29; Singapore. Orchard Plaza: Cl-premier;2003. p. 121-30.
  15. Korean Industrial Standards. Standard test methoda for flexural strength of concrete. Eumseong (Korea): Korean Standards Association; 2016. 17 p.
  16. Korean Industrial Standards. Standard test methoda for flexural performance of fiber reinforced concrete. Eumseong (Korea): Korean Standards Association; 2014. 16 p.
  17. American Society for Testing and Materials. Standard method first crack strength of fiber reinforced concrete. West Conshohocken(US): ASTM; 1997. 8 p.
  18. Jang JG, Ahn YB, Souri H, Lee HK. A novel eco-friendly porous concrete fabricated with coal ash and geopolymeric binder: heavy metal leaching characteristics and compressive strength. Journal of the Construction and Building Materials. 2015 Mar;79:173-81. https://doi.org/10.1016/j.conbuildmat.2015.01.058
  19. Lian C, Zhuge Y, Beecham S. The relationship between porosity and strength for porous concrete. Journal of Construction and Building Materials. 2011 Nov;25(11):4294-8. https://doi.org/10.1016/j.conbuildmat.2011.05.005
  20. American Concrete Institute. Building code requirements for structural concrete. Michigan(US): ACI; 2014. Chapter 22, Sectional strength p. 347-84.