• 한국전자거래학회지
• /
• 제22권1호
• /
• pp.15-35
• /
• 2017

공공사업 타당성 평가나 대안 선정에서는 대부분 AHP 기법을 활용하여 대안별 가중합 방식으로 최종 점수를 산정하고 그 값이 가장 큰 대안을 선택하고 있다. 특히 타당성 분석과 같은 경우에는 최종 점수가 0.5보다 큰 대안을 선택하게 되는데, 그 값이 0.5보다 얼마나 커야 의사결정이 의미있고 설득력있는 판단이라고 할 수 있는지에 대한 합리적인 기준 없이 적용되고 있다. 한국개발연구원(KDI)에서 제시한 방법론에는 사업진행 대안의 종합 점수가 0.5 근처에 있는 경우를 회색 영역으로 구분하여 신중한 결정을 하도록 제시하고 있는데, 세부기준에 관한 이론적 검토는 빈약하다. 반면, 통계적 검정의 개념을 도입하여 시도된 분석사례에서는 가중합 평가 점수의 확률분포로서 정규분포 또는 베타분포를 가정하였으나, 이에 대한 분포적 타당성은 제시되지 않았다. 본 논문에서는 현재 다양한 분야에서 적용되고 있는 가중합 평가 방식의 사례를 검토하여 그 결과의 통계적 검정의 필요성을 제기하고, 통계적 검정을 위하여 특정 분포를 가정하지 않는 비모수적 검정 방법을 제시한다. 그리고 본 연구에서 제시한 방법을 국방 분야의 사례에 적용하고 그 함의와 함께 향후 연구의 발전방향을 제안한다.

• 말소리와 음성과학
• /
• 제1권3호
• /
• pp.155-163
• /
• 2009

This paper introduces an automatic voice classification system for the diagnosis of individual constitution based on Sasang Constitutional Medicine (SCM) in Traditional Korean Medicine (TKM). For the developing of this algorithm, we used the voices of 473 speakers and extracted a total of 144 speech features from the speech data consisting of five sustained vowels and one sentence. The classification system, based on a rule-based algorithm that is derived from a non parametric statistical method, presents binary negative decisions. In conclusion, 55.7% of the speech data were diagnosed by this system, of which 72.8% were correct negative decisions.

• 전기학회논문지
• /
• 제63권2호
• /
• pp.291-296
• /
• 2014

Most of the statistical signal analysis processed in the time domain and the frequency domain are based on the assumption that the signal is weakly stationary(wide sense stationary). Therefore, it is necessary to know whether the surface EMG signals processed in the statistical basis satisfy the condition of weak stationarity. The purpose of this study is to analyze the accuracy of the Run-test, modified Run-test, RA(reverse arrangement)-test, and modified RA-test for assessing surface EMG signal stationarity. Six stationary and three non-stationary signals were simulated by using sine wave, AR(autoregressive) modeling, and real surface EMG. The simulated signals were tested for stationarity using nine different methods of Run-test and RA-test. The results showed that the modified Run-test method2 (mRT2) classified exactly the surface EMG signals by stationarity with 100% accuracy. This finding indicates that the mRT2 may be the best way for assessing stationarity in surface EMG signals.

• 한국물환경학회지
• /
• 제24권6호
• /
• pp.676-681
• /
• 2008

The evaluation of the effluent water quality of sewage treatment plant is one of the most important factor in calculating total maximum daily loads (TMDLs). Current method to calculate 95% upper limit of effluent water quality of sewage treatment plant assuming normal distribution of data needs to be implemented in case of non-normal distribution. We have investigated the applicability of percentile ranking method as a non-parametric statistical analysis in case of non-normal distribution of data.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.299-304
• /
• 2001

An approach is developed for parametric investigation of the influence of the surface roughness on thermohydrodynamic analysis with film conditions which systemically occur in journal bearings. A parametric investigation is performed for predicting the bearing behaviors such as pressure and temperature distributions in lubricating films between the stationary and moving surfaces determined by absorbed layers and interfaces on the statistical method for rough surface with Gaussian distribution. The layers expressing the effects of surface roughness are expressed as functions of the standard deviations (${\sigma}$) of each surface and surface orientation (j) to explain the flow patterns between both rough surfaces. The coupled effect of surface roughness and shear zone dependency on hydrodynamic pressure and temperature has been found by solving the present model in non-contact mode and contact mode, respectively.

• 대한치과보철학회지
• /
• 제40권2호
• /
• pp.131-139
• /
• 2002

There have been many studies about marginal discrepancy of single restorations made by various systems and materials. But many of statistical inferences are not definite because of sample size, measurement number, measuring instruments. etc. The purpose of this study was to compare the marginal adaptations of the anterior single restorations made by different systems and to consider more desirable statistical methods in analysing the marginal fit. The in vitro marginal discrepancies of three different all-ceramic crown systems (Celay In-Ceram. Conventional In-Ceram. IPS Empress 2 layering technique) and one control group (PFM) were evaluated and compared. The crowns were made from one extracted maxillary central incisor prepared with a 1mm shoulder margin and $6^{\circ}$ taper walls by milling machine. 10 crowns per each system were fabricated. Measurements or a crown were recorded at 50 points that were randomly selected for marginal gap evaluation. Non-parametric statistical analysis was performed for the results. Within the limits of this study, the following conclusions were drawn: 1 Mean gap dimensions and standard deviations at the marginal opening for the maxillary incisor crowns were $98.2{\pm}40.6{\mu}m$ for PFM, $83.5{\pm}18.7{\mu}m$ for Celay In-Ceram, $104.9{\pm}44.1{\mu}m$ for conventional In-Ceram, and $45.5{\pm}11.5{\mu}m$ for IPS Empress 2 layering technique. The IPS Empress 2 system showed the smallest marginal gap (P<0.05). The marginal openings of the other three groups were not significantly different (P<0.05). 2 The marginal discrepancies found in this study were all within clinically acceptable standards ($100\sim150{\mu}m$). 3. When the variable is so controlled that the system may be the only one, mean value is interpreted to be the marginal discrepancy of a restoration which is made by each system and standard deviation is to be technique-sensitivity of each one. 4. From the standard deviations. the copy-milling technique (Celay/In-Ceram) was not considered to be technique-sensitive in comparison with other methods. 5. Parametric analysis is more reliable than non-parametric one in interpretation of the mean and standard deviation. The sample size of each group has to be more than 30 to use parametric statistics. The level of clinically acceptable marginal fit has not been established. Further studies are needed.

• 말소리와 음성과학
• /
• 제6권1호
• /
• pp.71-76
• /
• 2014

In this paper voice quality of normal speech is qualitatively classified by five components of breathy, creaky, rough, nasal, and thin/thick voice. To determine whether a correlation exists between a subjective measure of voice and an objective measure of voice, each voice is perceptually evaluated using the 1/2/3 scale by speech processing specialists and acoustically analyzed using speech analysis tools such as the Praat, MDVP, and VoiceSauce. The speech parameters include features related to speech source and vocal tract filter. Statistical analysis uses a two-independent-samples non-parametric test. Experimental results show that statistical analysis identified a significant correlation between the speech feature parameters and the components of voice quality.

• 대한자원환경지질학회:학술대회논문집
• /
• 대한자원환경지질학회 2005년도 춘계 학술발표회 논문집
• /
• pp.131-135
• /
• 2005

• Journal of Acupuncture Research
• /
• 제20권1호
• /
• pp.144-158
• /
• 2003

This study was carried out to investigate what kinds of statistical techniques have been used to analyze data from oriental medicine research, For study, 551 original articles which used statistical techniques in their data analysis were selected form the articles published in The journal of Korean Acupuncture & Moxibustion Society(JKAMS) between 1984 to 2002. among them, 122 articles used descriptive statistics while 429 articles used inferential statistics for data analysis. For that 429 articles, t-test (189 articles), analysis fo variance (111 articles), chi-square test (14 articles), correlation (10 articles), regression analysis (4 articles), factor analysis(5 articles), or nonparametric test (23 articles) were chose to analyze the data. Nonparametric approach has substantial power in case data do not meet the assumption of normality. This method is not only easy to use ut also provides measures of the statistical variation of nominal and ordinal scale. This study shows that more and more recent papers use nonparametric test compared to the old articles. nine different statistical software or packages (SAS, SPSS, Statview, Minitab, Sigma plot, ISP, Graphpad prism, Excel, Access) have been used in the articles published JKMAS. High level statistical techniques such as SAS, SPSS, and Statview are user friendly and used most for acupuncture and Moxibustion research. Including tables and plots in an article facilitates understanding family process data from a descriptive standpoint, minimized erroneous statistical conclusions, and clarifies theoretically important relationships among variables. Table and plots have been used 500 and 233 articles, respectively. A computer procedure is proposed and illustrated with statistical packages using SAS, SPSS, Statview and ISP.

• 응용통계연구
• /
• 제25권1호
• /
• pp.163-181
• /
• 2012

비정규직 재직자 직업능력개발에 대한 훈련 효과 추정을 위해 이 연구에서는 통계청의 경활 자료와 비모수적 매칭 방법을 사용하였다. 추정결과 재직자 직업능력개발 훈련은 정규직 자에게는 정규직 유지가능성을 높이고 비정규직 자에게는 임금보다는 정규직 전환확률을 높이는 것으로 나타났다. 또한 미관찰 요인에 의한 추정결과의 강건성을 알아보는 민감도 분석에서는 미관찰 요인은 추정결과에 크게 영향을 미치지 않는 것으로 나타났다.