• Journal of Sensor Science and Technology
• /
• v.29 no.2
• /
• pp.105-111
• /
• 2020

Interest and demand for hydrogen sensors are increasing in the field of H₂ leakage detection during storage/transport/use and detection of H₂ dissolved in transformer oil for safety issues as well as in the field of breath analysis for non-invasively diagnosing a number of disease states for a healthy life. In this study, various ZnO-based sensors were synthesized by controlling the reduction in crystallite size, decoration of Pt nanoparticles, doping of electron donating atoms, and doping of various atoms with different ionic radii. The sensing response of the various prepared ZnO-based nanoparticles and quantum dots (QDs) for 10 ppm H₂ was investigated. Among the samples, the smallest-sized (3.5 nm) In³⁺-doped ZnO QDs showed the best sensing response, which is superior to those in previously reported hydrogen sensors based on semiconducting metal oxides. The higher sensing response of In-doped ZnO QDs is attributed to the synergic effects of the increased number of oxygen vacancies, higher optical band gap, and larger specific surface area.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.E1
• /
• pp.29-33
• /
• 2004

In environmental studies, decisions are often made on the analytical data indicating certain contaminants as being 'detected' or 'non-detectible.' Since detection limits are analytical method specific, one has to first review the concepts and definitions associated with analytical method systems and specifications. In this study, the experimental analytical values for a series of low level standards (for an ionic species) were used as an example to estimate two different method detection limits (MDL). The scores of EPA's MDL and Pallesen's MDL determined by real analytical scores are 0.0575 and 0.0561 mg/L, respectively for our nitrate data. These scores determined by two different MDL models are roughly similar, while there are apparent differences between two methods with respect to statistical and systematical procedure. However, determination of MDL for one's laboratory provides some practical applications which helps to assure one's regulating authorities that one's measured scores are accurate.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.4
• /
• pp.386-392
• /
• 1999

A large-scale culture of hepatitis A virus in human diploid MRC-5 cells was conducted. In a roller bottle culture, the virus was grown to a maximum titer in 3 weeks after infection. Over 95％ of the cell-associated virus was excreted after culturing the infected cells in suspension media without fetal bovine serum for 3 days. The cultured virus was inactivated with formalin, concentrated by ultrafiltration, and partially purified by ultracentrifugation in a non-ionic gradient medium of Renocal. Two separate peak fractions showing high anti-HAY ELISA titer were pooled and about 40％ of HAV antigen was recovered by this purification procedure. Of the partially purified vaccine, the protein pattern in SDS-PAGE and immunogenicity in mice were compared with a commercial HAV vaccine. In SDS-PAGE, the purified vaccine in this study and the commercial vaccine showed almost the same protein pattern. The seroconversion rate of the purified vaccine in mice was not different from that of the commercial vaccine. Therefore, we could prepare a good grade of HAV vaccine by a simple purification procedure although the purification itself was not completed.

• Textile Coloration and Finishing
• /
• v.19 no.1 s.92
• /
• pp.12-16
• /
• 2007

Exhaustion increase using cationic dyes on polyamide fibers are not easy work due to the limited amounts of the functional end groups(-COOH) in the substrates. Therefore, to enhance dye exhaustion, polyamide fibers are required to be modified onto desired surface properties of the fibers using anionic bridging agent. In this study, synthetic tanning agent for pre-treatment finishing and cationic dye(berberine chloride) for dyeing of polyamide fibers were used. For surface modification, polyamide fibers were pre-treated with synthetic tanning agent at various concentrations and temperatures. The increased concentration and temperatures of synthetic tanning agents had resulted in exhaustion increase. The modified polyamide substrates skewed increased cationic dyeing exhaustions and the corresponding dyeing results from treated samples represented higher exhaustion properties than those of non-treated counterpart. The increased dyeing effects of cationic dye can be attributed to the supplied ionic interaction and electrostatic attraction sites on the surface of polyamide substrates.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.4
• /
• pp.31-37
• /
• 2011

The feasibility study of soil flushing was investigated to remediate lubricant oil and zinc contaminated railway soil. In this study, mixed washing agents of surfactant and inorganic acid/base were used for the simultaneous removal. The mixed washing agent of non-ionic surfactant and HCl removed 15% of the lubricant oil and 40% of zinc, respectively. Alkaline-enhanced soil washing process increased the removal of lubricant oil up to 40%. This is because alkaline solution reduced the interfacial tension between water phase and lubricant oil phase due to the soap formation reaction. To simulate in-situ soil flushing for the remediation of railroad-related contamination, two dimensional soil flushing was carried out based on the results of batch soil washing. In the soil flushing, the removal efficiencies of lubricant oil and zinc were 34% and 16%, respectively. Even though the removal efficiency was low, the mixed washing agent can remove metal and lubricant oil simultaneously.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.1
• /
• pp.29-36
• /
• 2003

Clenbuterol, a selective ${\beta}_2-adrenergic$ receptor stimulant, has been introduced as a potent bronchodilator for patients with bronchial asthma, chronic obstructive bronchial disease, chronic bronchitis and pulmonary emphysema. The percutaneous permeation of clenbuterol was investigated in hairless mouse skin after application of 50/50 buffer(pH 10)/propylene glycol solvent mixture. The enhancing effects of various penetration enhancers such as terpenes, non-ionic surfactants, pyrrolidones, fatty acids and some other enhancers on the permeation of clenbuterol were evaluated using Franz diffusion cell. Among terpenes studied, 1,8-cineole was the most effective enhancer, which increased the permeability of clenbuterol approximately 39.33-fold compared with the control without penetration enhancer, followed by menthone with enhancement ratio of 23.57. Nonionic surfactants did not have significant enhancing effects. N-Lauryl-2-pyrrolidone increased the permeability of clenbuterol approximately 4.51-fold compared with the control. Lauric acid increased the permeability of clenbuterol approximately 35.57-fold with decreasing the lag time from 2.64 to 0.52 hr. Oleic acid, linoleic acid, linolenic acid and capric acid showed enhancement ratio of 22.62, 19.60, 17.45 and 16.51, respectively. $Labrafil^{\circledR}$ enhanced the permeability of clenbuterol 9.24-fold compared with that without enhancer.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.2
• /
• pp.647-652
• /
• 2015

A fully coupled finite element analysis (FEA) technique was developed for analyzing the discharge phenomena and dielectric liquid flow while considering surface charge density effects in dielectric flow guidance. In addition, the simulated speed of surface charge propagation was compared and verified with the experimental results shown in the literature. Recently, electrohydrodynamics (EHD) techniques have been widely applied to enhance the cooling performance of electromagnetic systems by utilizing gaseous or liquid media. The main advantage of EHD techniques is the non-contact and low-noise nature of smart control using an electric field. In some cases, flow can be achieved using only a main electric field source. The driving sources in EHD flow are ionization in the breakdown region and ionic dissociation in the sub-breakdown region. Dielectric guidance can be used to enhance the speed of discharge propagation and fluidic flow along the direction of the electric field. To analyze this EHD phenomenon, in this study, the fully coupled FEA was composed of Poisson's equation for an electric field, charge continuity equations in the form of the Nernst-Planck equation for ions, and the Navier-Stokes equation for an incompressible fluidic flow. To develop a generalized numerical technique for various EHD phenomena that considers fluidic flow effects including dielectric flow guidance, we examined the surface charge accumulation on a dielectric surface and ionization, dissociation, and recombination effects.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.4
• /
• pp.415-420
• /
• 2000

The daily mean concentrations of PM2.5 mass ionic species carbonaceous species and HNO3, HCl, and NH3 were analyzed at three background sites in Korea : Kangwha, Kosan, and Dongbaik during two intensive field studies between December 1996 and January 1997, Four-day backward trajectory analysis was also carried out. The mean concentrations of anthropogenic species were higher at Kangwha and Dongbaik than Kosan. At these two sites themean concentrations of nitrate and ammonium/ammonia were higher than those of Kosan. It was suggested that these two sites be considered as the background sites of the Seoul Metropolitan Area and Pusan respectively. Major chemical components in fine particles were sulfate organic carbon nitrate and ammonium for all the sites. More than 90% of sulfate were non-sea-salt(nss) sulfates and most of the nss sulfate in PM2.5 might be present as ammonium sulfates at all sites. Most of air parcels arriving a Kangwha and Dongbaik were from the northern China. At Kosan during the measurement period half of air parcels were from the northern China and the other half from the southern China. At Kosan the concentrations of anthropogenic air pollutants originated from the southern China were higher than those typically observed from the northern China.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.6
• /
• pp.1129-1133
• /
• 2004

The effects of Pluronic F-68, a non-ionic surfactant, on the growth and physical characteristics of Digitalis lanata suspension cultures were investigated in aqueous two-phase systems (ATPSs) composed of $4.5\%$ polyethylene glycol (PEG) 20,000 and $2.8\%$ crude dextran. In the range of 0.1-10.0 g $1^{-1}$, Pluronic F-68 enhanced the maximum cell density in a medium with ATPSs, even though Pluronic F-68 did not affect cell growth in a normal growth medium. In terms of physical properties of ATPSs with cell suspension cultures, 0.2 g $1^{-1}$ of Pluronic F-68 reduced viscosity by up to $40\%$, while 0.1 g $1^{-1}$ of Pluronic F-68 significantly enhanced the oxygen transfer rate. In addition, we successfully performed aqueous two-phase cultivation in a 5-1 stirred tank bioreactor with 0.5 g $1^{-1}$ of Pluronic F-68, and discovered that cell growth in ATPSs was similar to that in normal growth medium.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.47 no.5
• /
• pp.27-39
• /
• 2005

In the recent design of high ductile fiber-reinforced ECC (engineered cementitious composite), optimizing both processing and mechanical properties for specific applications is critical. This study presents an innovative method to develop new class ECCs, which possess the different fluid properties to facilitate diverse types of processing (i.e., self-consolidating or shotcrete processing) while maintaining ductile hardened properties. In the material design concept, we employ a parallel control of fresh and hardened properties by using micromechanics and cement rheology. Control of colloidal interaction between the particles is regarded as a key factor to allow the performance of the specific processing. To determine how to control the particle interactions and the viscosity of cement suspension, we first introduce two chemical admixtures including a highly charged polyelectrolyte and a non-ionic polymer. Optimized mixing steps and dosages we, then, obtained within the solid concentration predetermined based on micromechanical principle. Test results indicate that the rheological properties altered by this approach were revealed to be highly effective in obtaining the desired function of the fresh ECC, allowing us to readily achieve hardened properties, represented by pseudo strain-hardening behavior in uniaxial tension.