• 한국안전학회지
• /
• 제23권4호
• /
• pp.30-35
• /
• 2008

The present study has been conducted to examine the effect of grid resolution on the predicted results for electric cable fire using pyrolysis model in FDS(Fire Dynamics Simulator, version 5). The grid independent test for different grid resolutions has been performed for a PE coating cable and the grid resolution is defined by the non-dimensional characteristic length of fire and mean grid size. The calculated maximum heat release rate and mean flame spread rate were almost constant for higher grid resolution of 20${\sim}$25 and the computing time for the grid resolution takes approximately 20hours to solve flame propagation with pyrolysis model. The geometrical simplification of a electric cable dose not greatly affect on the maximum heat release rate and flame spread rate and the rectangular approximation of cable shape gives acceptable result comparing with the round cable with stepwise grid.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 추계 학술대회논문집
• /
• pp.145-151
• /
• 1999

An Interactive grid generation program(KGRID) with graphical user interface(GUI) has been improved. KGRID works on the UNLX environment and GUI has been implemented with OSF/Motif and X Toolkit and the graphics language is Open GL for visualization of the 3D objects. It supports more convenient user environment to generate 2D and 3D multi-block structured grid systems. It provides various useful field grid generation methods, which are the algebraic methods, the elliptic partial differential equations method and the predictor-corrector method. It also supports 3D surface grid generation with NURBS(Non-Uniform Rational B-Spline) and various stretching functions to control grid points distribution on curves and surfaces. And some menus are added to perform flexible management, for the objects. We generated surface and field grid system about full aircraft configuration using KGRID. The performance and stability of the KGRID is verified through the generation of the grid system about a complex shape.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.518-529
• /
• 2015

Repetitive and proportional-resonant controllers can effectively reject grid harmonics in grid-connected inverters because of their high gains at the fundamental frequency and the corresponding harmonics. However, the performances of these controllers can seriously deteriorate if the grid frequency deviates from its nominal value. Non-ideal proportional-resonant controllers provide better immunity to variations in grid frequency by widening resonant peaks at the expense of reducing the gains of the peaks, which reduces the effectiveness of the controller. This paper proposes a repetitive control scheme for grid-connected inverters that can track changes in grid frequencies and keep resonant peaks lined up with grid frequency harmonics. The proposed controller is implemented using a digital signal processor. Simulation and practical results are presented to demonstrate the controller capabilities. Results show that the performance of the proposed controller is superior to that of a proportional-resonant controller.

• Journal of Electrical Engineering and Technology
• /
• 제6권4호
• /
• pp.466-473
• /
• 2011

This paper proposes a protection algorithm for a wind turbine generator (WTG) in a large wind farm. To minimize the outage section, a protection relay for a WTG should operate instantaneously for an internal fault or a connected feeder fault, whereas the relay should not operate for an internal fault of another WTG connected to the same feeder or an adjacent feeder fault. In addition, the relay should operate with a delay for an inter-tie fault or a grid fault. An internal fault of another WTG connected to the same feeder or an adjacent feeder fault, where the relay should not operate, is determined based on the magnitude of the positive sequence current. To differentiate an internal fault or a connected feeder fault from an inter-tie fault or a grid fault, the phase angle of the negative sequence current is used to distinguish a fault type. The magnitude of the positive sequence current is then used to decide either instantaneous operation or delayed operation. The performance of the proposed algorithm is verified under various fault conditions with EMTP-RV generated data. The results indicate that the algorithm can successfully distinguish instantaneous operation, delayed operation, or non-operation depending on fault positions and types.

• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.588-603
• /
• 2018

This paper presents the idea of a smart load that can adjust the input power flow based on the intermittent power available from RESs (Renewable Energy Resources) to regulate the line voltage, and draw a constant power from the grid. To this effect, an innovative power flow controller is presented based on a Resistive ES (Electric Spring) in combination with a PEAT (Power Electronics based Adjustable Transformer), which can effectively shape the load power flow at the subnetwork level. With a PEAT incorporated in the step down transformer at the grid side, the proposed controller can supply non-critical loads through local RESs, and the critical loads can draw a relatively constant power from the grid. If there is an abundance of power produced by the RESs, the controller can supply both non-critical loads and critical loads through the RES, which significantly reduces the power demand from the grid. The principle, practicality, stability analysis, and controller design are presented. In addition, simulation results show that the power flow controller performs well in shaping the load power flow at the subnetwork level, which decreases the power demand on the grid. Experimental results are also provided to show that the controller can be realized.

• 한국시뮬레이션학회논문지
• /
• 제15권3호
• /
• pp.31-37
• /
• 2006

모바일 그리드 네트워크의 단점인 연결의 불안정성과 이기종의 비전용 이동장비의 사용을 고려한 환경에서, 모바일 그리드 시스템의 효율적인 성능을 제공하기 위해서 본 논문에서는 작업할당 스케줄링 알고리즘을 제시하였다. 제시한 스케줄링 알고리즘은 두 개의 중요기능이 있으며, 이는 작업처리 시간을 예측하는 것과 작업을 수행시키기 위해 필요한 최적의 이동단말기의 개수를 정하는 것이다. 이러한 성능을 제공하기 위해서 제시한 알고리즘에서는 무선 네트워크 환경에서 이기종의 비전용장비의 영향을 고려한 네트워크의 지연시간을 계산하는 수학적인 수식을 제시하였다. 또한 구현된 모바일 그리드 환경에서 분산 어플리케이션을 수행하여 제시한 스케줄링 알고리즘에 대해 성능평가를 수행하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 춘계 학술대회논문집
• /
• pp.128-134
• /
• 2005

In the CFD area, the numerical analysis of high Mach number flow over a blunt-body poses many issues. Various numerical schemes have been developed to cover the issues, but the traditional schemes are still used widely due to the complexities of new schemes and intricacy of modifying the established codes. In the present study, the well-known Roe's FDS based on TVD-MUSCL scheme is used for the solution of very high Mach number three-dimensional flows posing carbuncle and non-physical phenomena in numerical analysis. A parametric study was carried out to account for the effects of the entropy fixing, grid configurations and initial condition. The carbuncle phenomena could be easily overcome by the entropy fixing, and the non-physical solution could be eliminated by the use of the modified initial condition regardless of entropy fixing and grid configurations.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권2호
• /
• pp.155-161
• /
• 2014

Industrial Static Var Generator (SVG) is typically applied at or near the load center to mitigate voltage fluctuation, flicker, phase unbalance, non-sine distortion or other load-related disturbance. Special attention is paid to the influence of grid voltage quality on SVG current, the non-sine distortion and unbalance of grid voltage causes not only the AC current distortion and unbalance but also the DC voltage fluctuation. In order to let the inverter voltage contain the fundamental negative sequence and harmonic component corresponding to the grid voltage, a new dual-loop control scheme is proposed to suppress the influence in this paper. The harmonic and negative sequence voltage decomposition algorithm and DC voltage control are also introduced. All these analyses can guide the practical applications. The simulation results verify the feasibility and effectiveness of the present control strategy and analyses.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1995년도 추계 학술대회논문집
• /
• pp.82-89
• /
• 1995

In the present paper, a method of nearly orthogonal grid generation in an arbitrary simply-connected 3D domain will be presented. The method is a new direct and non-iterative scheme based on the concept of the decomposition of the global orthogonal transformation into consecutive mapping of a conformal mapping and an auxiliary orthogonal mapping, which was suggested by King and Leal [4]. In our numerical scheme. Kang and Leal's method is extended from 2D problems to 3D problems while the advantage of the non-iterative algorithm is maintained. The essence of the present mapping method is that an iterative scheme can be avoided by introducing a preliminary step. This preliminary step corresponds to a conformal map and is based on the boundary element method(BEM). This scheme is applied to generate several nearly-orthogonal grid systems which are orthogonal at boundaries.

• 정보처리학회논문지A
• /
• 제11A권4호
• /
• pp.267-276
• /
• 2004

자동배치/배선 시스템의 배선영역 모델링 방법은 그리드와 논 그리드 방식을 사용하고 있다. 그리드 방식은 PCB상에 전기적, 물리적 요소들이 적다할지라도 보드와 그리드의 크기에 제약을 받기 때문에 메모리가 많아지게 되어 자동배치/배선 속도를 감소시키는 단점을 가지고 있다. 논 그리드 방식인 형상기반 방식은 영역처리 방식을 사용하므로 형상들을 메모리에 각각의 객체로서 존재시키며, 이들 객체는 고유의 데이터 크기를 갖기 때문에 메모리가 상당히 적게 소요된다. 그러므로 본 논문에서는 단일 원점에서 여러 목적지에 가장 빠르게 도달 할 수 있는 최단 경로 문제를 해결하는 경매 알고리즘을 적용하여 형상기반 방식에 의하여 메모리 낭비 없이 빠른 속도로 자동배치/배선할 수 있는 PCB 자동배치/배선 시스템을 개발하였다. 또한 본 시스템은 이와 같은 방식을 이용하여 PC에서 사용할 수 있도록 IBM Pentium 컴퓨터의 Windows 환경에서 Visual C++언어로 개발하였다.