• Smart Structures and Systems
• /
• 제6권7호
• /
• pp.851-866
• /
• 2010

This paper presents a new concept of using PZT (lead zircornate titanate) transducers as a non-destructive testing (NDT) tool for evaluating quality of concrete. Detection of defects in concrete is very important in order to check the integrity of concrete structures. The electro-mechanical impedance (EMI) response of PZT transducers bonded onto a concrete specimen can be used for evaluating local condition of the specimen. Measurements are carried out by electrically exciting the bonded PZT transducers at high frequency range and taking response measurements of the transducers. In this study, the compression test results showed that concrete specimens without sufficient compaction are likely to fall below the desired strength. In addition, the strength of concrete was greatly reduced as the voids in concrete were increased. It was found that the root mean square deviation (RMSD) values yielded between the EMI signatures for concrete specimens in dry and saturated states showed good agreement with the specimens' compressive strength and permeable voids. A quality metric was introduced for predicting the quality of concrete based on the dry-saturated state of concrete specimens. The simplicity of the method and the current development towards low cost and portable impedance measuring system, offer an advantage over other NDE methods for evaluating concrete quality.

• Computers and Concrete
• /
• 제15권4호
• /
• pp.503-514
• /
• 2015

Fibre-added concretes are frequently used in large site applications such as slab and airports as well as in bearing system elements or prefabricated elements. It is very difficult to determine the mechanical properties of the fibre-added concretes by experimental methods in situ. The purpose of this study is to develop an artificial neural network (ANN) model in order to predict the compressive and bending strengths of hybrid fibre-added and non-added concretes. The strengths have been predicted by means of the data that has been obtained from destructive (DT) and non-destructive tests (NDT) on the samples. NDTs are ultrasonic pulse velocity (UPV) and Rebound Hammer Tests (RH). 105 pieces of cylinder samples with a dimension of $150{\times}300mm$, 105 pieces of bending samples with a dimension of $100{\times}100{\times}400mm$ have been manufactured. The first set has been manufactured without fibre addition, the second set with the addition of %0.5 polypropylene and %0.5 steel fibre in terms of volume, and the third set with the addition of %0.5 polypropylene, %1 steel fibre. The water/cement (w/c) ratio of samples parametrically varies between 0.3-0.9. The experimentally measured compressive and bending strengths have been compared with predicted results by use of ANN method.

• 한국기계가공학회지
• /
• 제11권4호
• /
• pp.154-159
• /
• 2012

Condition monitoring(CM) is a method based on Non-destructive test(NDT). Therefore, recently many kind of NDT were applied for CM. Acoustic emission(AE) is widely used for the early detection of faults in rotating machinery in these days also. Because its sensitivity is higher than normal accelerometers and it can detect low energy vibration signals. A machine tool consist of many parts such as the bearings, gears, process tools, shaft, hydro-system, and so on. Condition of Every part is connected with product quality finally. To increase the quality of products, condition monitoring of the components of machine tool is done completely. Therefore, in this paper, acoustic emission method is used to detect a machine fault seeded in a gearbox. The AE signals is saved, and power spectrums and feature values, peak value, mean value, RMS, skewness, kurtosis and shape factor, were determined through Matlab.

• Computers and Concrete
• /
• 제15권3호
• /
• pp.473-484
• /
• 2015

In this study, the availability of Schmidt hammer has been investigated as a reliable method to determine the quality of concrete in irrigation networks. For this purpose, the 28-day compressive strength of concrete material used in the construction irrigation channel of Bafra lowland, which is one of the most fertile plains in Turkey was examined by means of concrete compression and as well as concrete Schmidt hammer in laboratory conditions. This study was carried out on cylindrical samples to represent the everyday concrete party ($150m^3$) produced by contractor firm as 3 replications. The statistical analysis of experimental data showed that the correlations between the values of 28-day compressive strength of Schmidt hammer and the rebound number was found to be 0.98. Differences of the compressive strength between compression testing and Schmidt hammer were statistically significant at P<0.01. In this context, it was found that the reliability of compressive strength of the concrete compression test are excellent, also the reliability of compressive strength of Schmidt hammer are fair in assessing the quality of concrete irrigation channels.

• 한국방사선학회논문지
• /
• 제13권1호
• /
• pp.39-44
• /
• 2019

Co-60 및 Ir-192 등의 방사성 동위원소가 비파괴 검사(Non-Destructive Test; NDT) 등의 분야에서 널리 쓰임에 따라 방사선 안전관리가 매우 중요시되고 있다. 본 연구에서는 요오드화수은(Mercury(II) Iodide; $HgI_2$)의 선원추적 시스템 적용 가능성을 평가하였다. $HgI_2$로 제작된 Unit cell 센서의 신뢰도 검증을 위한 전기적 특성평가를 수행한 후, 방사선에 대한 센서의 위치의존성을 분석하고, Planning system의 선량 분포와 비교하였다. 평가결과, R-sq>0.99 이상의 선형성과 CV<0.015 이하의 재현성을 보이며 신뢰도가 높은 것으로 나타났다. 또한, 위치의존성 평가에서는 센서의 isocenter에서 최댓값이 측정되었으며, 거리에 따라 점진적 감소를 나타냈다. 그러나 Planning system 상의 선량 분포 데이터와는 최대 30%의 차이를 보였는데, 센서는 단일지점으로부터 데이터를 수집하는 Planning system과 달리 면적으로부터 수집하기 때문으로 사료된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.639-642
• /
• 1999

Pullout test known as Lok test among the test methods to evaluate concrete strength strength is a test method which is used to decide the form removal time by assessing the early strength of concrete in a new construction, or to control the quality of newly placed concrete. This method has inconvenience to place inserts on the form work in advance, however, the placing work is quite simple and it has advantage that the strength can be measured at field as long as the inserts are placed. In this study, the first step is to investigate the properties of test method itself, by performing the laboratory test which covers deviation of the method and factors affecting the results, etc. The second step is to correlate the result with cylinder strength and other NDT methods such as rebound hammer, ultrasonic method, etc. And that, the results are compared with foreign results to find the differences between the two. In this research, new factors such as moisture content, area of aggregate failure cross section and area of aggregate separation cross section, etc as well as wate-cement ratio and age are investigated.

• 한국압력기기공학회 논문집
• /
• 제5권2호
• /
• pp.7-12
• /
• 2009

The flaws detected by the non-destructive surface test methods shall be sized by means of the volumetric test such as an UT(ultrasonic test) or an ECT(eddy current test) for the purpose of analyzing and repairing them. It is generally known that the ECT is a comparatively effective technique for the small size cracks which are located shallowly from the surface. On this study, the ECT technique was tried to size the depth of the crack-like EDM notches, and it is identified that the ECT is an appropriate depth sizing technique for the shallow cracks less than 3mm in the Martensitic CA6NM material.

• 비파괴검사학회지
• /
• 제34권1호
• /
• pp.60-67
• /
• 2014

본 연구에서는 사장교의 핵심부재인 케이블 점검을 위한 자동화 검사 시스템을 개발하였다. 강자성체로 이뤄진 연속체 구조물인 케이블의 내외부 검사에 적합한 비파괴검사법으로는 선행연구를 통해 검증된 누설자속탐상법이 적용되었고, 홀센서와 영구자석을 이용하여 다채널의 누설자속 측정용 자기센서헤드를 제작하였다. 또한 케이블 검사의 자동화로 접근성을 높이기 위해 사장교 케이블을 따라 이동할 수 있는 바퀴굴림 방식의 케이블 등반 로봇을 설계 및 제작하였고, 로봇을 다양한 디바이스에서 모니터링 및 제어하기 위한 컨트롤 프로그램을 제작하였다. WLAN 방식의 무선통신기술을 적용하여 원격으로 계측 데이터 전송 및 로봇제어를 가능하게 하였다. 최종적으로 본 연구를 통해 개발된 세부 기술들이 연동된 누설자속탐상법 기반 케이블 이동형 진단 시스템을 이용하여 실제 운용중인 서해대교의 케이블을 대상으로 현장 시험을 수행함으로써 본 시스템의 현장 적용성을 검증해보았다.

• 콘크리트학회논문집
• /
• 제15권6호
• /
• pp.924-929
• /
• 2003

A majority of infrastructures has been deteriorated over time. Therefore, it is very important to verify the quality of construction, and the level of structural deterioration in existing structures, to ensure their safety and functionality. Many researchers have studied non-destructive testing (NDT) methods to identify structural problems in existing structures. The impact echo technique is one of the widely used NDT techniques. The impact echo technique has several inherent problems, including the difficulties in P-wave velocity evaluation due to inhomogeneous concrete properties, deterioration of evaluation accuracy where multiple reflection boundaries exist, and the influence of the receiver location in evaluating the thickness of the tested structures. Therefore, the objective of this paper is to propose an enhanced impact echo technique that can reduce the aforementioned problems and develop a Virtual Instrument for the application via a thickness evaluation technique which has same technical background to find deterioration in concrete structures. In the proposed impact echo technique, transfer function from dual channel system analysis is used, and coherence is improved to achieve reliable data. Also an averaged signal -ensemble- is used to achieve more reliable results. From the analysis of transfer function, the thickness is effectively identified.

• 한국정밀공학회지
• /
• 제15권7호
• /
• pp.149-159
• /
• 1998

The importance of soundness and safety evaluation in weld zone using by the ultrasonic wave has been recently increased rapidly because of the collapses of huge structures and safety accidents. Especially, the ultrasonic method that has been often used for a major non-destructive testing(NDT) technique in many engineering fields plays an important role as a volume test method. Hence, the defecting any defects of weld Bone in austenitic stainless steel type 304 using by ultrasonic wave and neural network is explored in this paper. In order to detect defects, a distance amplitude curve on standard scan sensitivity and preliminary scan sensitivity represented of the relation between ultrasonic probe, instrument, and materials was drawn based on a quantitative standard. Also, a total of 93％ of defect types by testing 30 defect patterns after organizing neural network system, which is learned with an accuracy of 99％, based on ultrasonic evaluation is distinguished in order to classify defects such as holes or notches in experimental results. Thus, the proposed ultrasonic wave and neural network is useful for defect detection and Ultrasonic Non-Destructive Evaluation(UNDE) of weld zone in austenitic stainless steel 304.