• Structural Monitoring and Maintenance
• /
• 제7권1호
• /
• pp.43-58
• /
• 2020

Pile foundations of existing bridges lie in soil and water environment for long term and endure relatively heavy vertical loads, thus prone to damages, especially after stricken by external forces, such as earthquake, collision, soil heap load and etc., and the piles may be injured to certain degrees as well. There is a relatively complete technical system for quality inspection of new bridge pile foundations without structures on the top. However, there is no mature technical standard in the engineering community for the non-destructive testing technology specific to the existing bridge pile foundations. The quality of bridge pile foundations has always been a major problem that plagues bridge maintenance. On the basis of many years' experiences in test engineering and theoretical studies, this study developed a new type of detection technology and equipment for the existing bridge piles.

• 한국컴퓨터정보학회논문지
• /
• 제21권9호
• /
• pp.45-49
• /
• 2016

In this study, an image processing algorithm was developed to increase readability of the images of specific parts of a KTX train acquired by using a mobile digital radiographic testing device in a situation where a running train is stopped. The image processing algorithm was realized by using a Visual C++ development tool. The algorithm developed in this study allows to select an interested region in the acquired images when the interested region is suspected to cause a problem, and applies a thinning process based Sobel operators to the selected region. The experimental results show that the readability of defect parts that are not visible to naked eyes was increased through edge detector. Application of the algorithm developed in this study may help to accurately read non-destructive inspection images.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.841-846
• /
• 2002

Development on non-destructive testing methods were performed to evaluate the effectiveness of crack repair for test beams induced a crack. Cracked beams are repaired with expoxy and microcement, and then they are tested by two methods, the ultrasonic pulse velocity method and the transfer function method. It is proved that the ultrasonic pulse velocity method is very valid for the evaluation of the effectiveness on expoxy repair, and the transfer function method is very applicable to evaluate the effectiveness on microcement repair.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.385-390
• /
• 1998

Non-destructive field tests of the concrete has achieved increasing acceptance for the evaluation of existing concrete structures. As two major testing methods, this paper recommends the proper empirical relationship between the rebound number together with the ultrasonic pulse velocity and the core strength to fit the old concrete bridges in Korea.

• 한국농공학회지
• /
• 제34권E호
• /
• pp.60-69
• /
• 1992

The research significance of the paper is to identify the major properties of synthetic lightweight concrete that are affected by ASR expansion and to determine the extent and magnitude of the loss in these properties. Emphasis is also given to the use of non-destructive testing techniques ; Such as dynamic modulus of elasticity and ultrasonic pulse velocity, to examine whether these methods could be used to identify the initiation of expansion and the internal structural damage caused by ASR.

• 한국농공학회논문집
• /
• 제60권6호
• /
• pp.111-119
• /
• 2018

The air-void is known to be one of the influencing factors for estimating long-term performance of asphalt concrete. Most of all, confirming air void or density of pavement layer is important for quality control of field compaction level of asphalt concrete pavement. In this study, a non-nuclear type non-destructive density gage (NDDG) was used to estimate compacted air-voids of asphalt pavement as a non-destructive test method. Asphalt concrete slab specimens were prepared using 6 types of asphalt mixes in laboratory (lab) for lab NDDG test. Four different base structure materials were used to find out if there were any differences due to the type of base structure materials. The actual air-voids and NDDG air-voids were measured from 6 asphalt concrete slabs. Four sections of field asphalt pavements were tested using the NDDG, and actual air voids were also measured from field cores taken from the site where the NDDG air-void was measured. From lab and field experimental tests, it was found that the air-voids obtained by NDDG were not the same as the actual air-voids measured from the asphalt concrete specimen. However, it was possible to estimate air voids based on the relationship obtained from regression analysis between actual and NDDG air voids. The predicted air-voids based on the NDDG air-voids obtained from 50mm depth were found to be reliable levels with $R^2{\fallingdotseq}0.9$. Therefore, it was concluded that the air-voids obtained from NDDG could be used to estimate actual air-voids in the field asphalt pavement with a relatively high coefficient of determination.

• 한국터널지하공간학회 논문집
• /
• 제8권1호
• /
• pp.3-12
• /
• 2006

본 연구의 목적은 록볼트의 건전도를 평가하기 위하여 록볼트의 비파피시험을 기술하고 바파괴시험의 적용성을 조사하는 것이다. 록볼트 자체와 그라우팅제를 포함한 록볼트의 건전도를 평가하기 위하여, 수치해석 및 실험적 방법을 이용한 두가지 방법이 적용되었다. 수치해석 방법에서는 분석은 DISPERSE 프로그램을 이용하여 록볼트의 분산선도를 해석하였다. 분산선도 곡선은 지중근입되어 있는 록볼트에 대한 그라우팅제의 두께와 강성에 대한 영향을 보여준다. 이로 부터 록볼트의 건전도 시험을 위한 최적의 주파수를 추정할 수 있으며, 그 결과 L(1, 0) 모드에서 20~120kHz가 최적의 주파수로 산정되었다. 실험적 방법에서는 실험실에서 사료를 제작하여 파괴 및 비파괴시험을 실시하였다. 비파괴 실험에서는 타격을 이용한 저주파수 모드와 초음파 트랜스듀서를 이용한 고주파수 모드를 통하여 록볼트의 상태를 조사할 수 있다. 실험실에서 수행된 비파괴실험으로부터, 유도파는 주변의 그라우팅제의 강도가 증가하거나 (또는 증가하고) 결함부 영역이 증가할 때 감쇠가 커짐을 알 수 있었다. 그리고 인발시험으로부터 록볼트의 극한지지력을 추정하였다. 본 연구는 록볼트의 건전도 평가에 비파괴시험이 매우 유용한 방법임을 보여준다.

• 한국수산과학회지
• /
• 제51권1호
• /
• pp.23-30
• /
• 2018

Kudoa septempunctata, a myxosporean parasite that infects olive flounder Paralichthys olivaceus is known to cause Kudoa food poisoning. Entire trunk muscle (ETM) is used for diagnosis of the parasite in fish and this method demands sacrifice of the host, causing a loss of commercial value. We developed a non-destructive method that uses a plastic syringe-style implanter to draw the sample, called the part-point muscle (PPM) sampling technique. We validated the PPM method in fish infected with K. septempunctata at the level detectable by the ETM method. We confirmed that the PPM method is equally sensitive in comparison to the ETM method for diagnosing K. septempunctata spores in olive flounder muscle. Our study also confirmed that the parasite is uniformly distributed in the dorsal muscle of infected fish. Over a period of 1 month, we observed no mortality of the host fish used for sampling by the PPM method. Thus, our studies demonstrate that the PPM sampling technique is an efficient, non-destructive method for diagnosing K. septempunctata in olive flounder.

• Structural Engineering and Mechanics
• /
• 제74권3호
• /
• pp.313-323
• /
• 2020

Non-destructive tests are commonly used in construction industry to access the quality and strength of concrete. However, till date there is no non-destructive testing method that can be adopted to evaluate the bond condition of reinforced concrete beams. In this regard, the presented research work details the use of ultra-sonic pulse velocity test method to evaluate the bond condition of reinforced concrete beam. A detailed experimental research was conducted by testing four identical reinforced concrete beam samples. The samples were loaded in equal increments till failure and ultra-sonic pulse velocity readings were recorded along the length of the beam element. It was observed from experimentation that as the cracks developed in the sample, the ultra-sonic wave velocity reduced for the same path length. This reduction in wave velocity was used to identify the initiation, development and propagation of internal micro-cracks along the length of reinforcement. Using the developed experimental methodology, researchers were able to identify weak spots in bond along the length of the specimen. The proposed method can be adopted by engineers to access the quality of bond for steel reinforcement in beam members. This allows engineers to carryout localized repairs thereby resulting in reduction of time, cost and labor needed for strengthening. Furthermore, the methodology to apply the proposed technique in real-world along with various challenges associated with its application have also been highlighted.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4002-4018
• /
• 2023

An integrated neutron interrogation system has been developed for non-destructive assay of highly-radioactive special nuclear materials, to accumulate knowledge of the method through developing and using it. The system combines a differential die-away (DDA) measurement system for the quantification of nuclear materials and a prompt gamma-ray analysis (PGA) system for the detection of neutron poisons which disturb the DDA measurements; a common D-T neutron generator is used. A special care has been taken for the selection of materials to reduce the background gamma rays produced by the interrogation neutrons. A series of measurements were performed to test the basic performance of the system. The results show that the DDA system can quantify plutonium of as small as 20 mg and it is not affected by intense neutron background up to 1.57 × 10⁷ s^-1 and gamma ray of 4.43 × 10¹⁰ s^-1. The gamma-ray background counting rate at the PGA detector was reduced down to 3.9 × 10³ s^-1 even with the use of the D-T neutron generator. The test measurements show that the PGA system is capable of detecting 0.783 g of boron and about 86.8 g of gadolinium in 30 min.