• Proceedings of the Korea Concrete Institute Conference
• /
• 1991.04a
• /
• pp.117-120
• /
• 1991

Cracks of concrete structure must be analyzed and estimated synthetically in order to have a maintenance and to insure the safety and the durability of structure. Concrete cracks have to be surveyed with respect to depth, width, shape and direction etc, but crack depth among these items is not measured easily. Occasionally, it needs to measure the crack depth of concrete structure for the purpose of evaulating the safe capacity and the necessity of repair. Therefore, this research is performed to verify the applicability and the accuracy of Ultra-sonic Pulse Velocity Technique(Tester), in non-destructive testing methods of concrete crack depth.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.283-285
• /
• 2006

Non Destructive Examination for welds is one of the most important processes to ensure the integrity of facilities of Nuclear power plants. An automated ultrasonic testing program is developed for welding inspection. A test block with side EDM notch is inspected with this program. This paper shows that the developed automated ultrasonic testing program is quite effective.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.293-294
• /
• 2009

The purpose of this study is to propose the new equations for the compressive strength of existing concrete hydraulic structures by ultrasonic pulse velocity test.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.729-736
• /
• 1997

This paper gives the information of field concrete placed under raining condition. Experimental factors in this study are concrete strength, standard deviation and coefficient of variation. The results are as follows: 1. The strength of field concrete placed under raining condition is not largely dependent on the raining condition. 2. But, the quality of concrete is very critical.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.2
• /
• pp.165-173
• /
• 2002

복합재부품의 제작후 검사로 적용될수 있는 방법은 방사선 투과검사와 초음파검사가 있으며, 전자는 특정 검사시에 국한되어 사용되며 그외의 검사에는 후자가 적용되는 것이 일반적이다. 복합재부품의 검사를 원활하게 수행하기 위해서는 초음파검사의 기본이론과 적용가능한 기법에 대한 이해가 필수적이다. 따라서 아래에서 초음파검사의 기본원리에 대해 간략하게 설명하고 그 실제 제작되고 있는 복합재부품에 대한 검사예를 살펴보고자 한다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.389-392
• /
• 2000

This paper provide nondestructive test method of concrete by applying ultrasonic pulse test. Whinstone aggregates produced from cheju island are used for coarse aggregate. The purpose of this study is to contribute to the standardization of nondestructive test for estimating compressive strength of concrete manufactured from cheju island. According to experimental results, it is found that compressive strength of Whinstone aggregates concrete shows higher than that of granite stone concrete, whereas ultrasonic pulse of Whinstone aggregates concrete shows lower that of granite concrete Based on the results of this study, estimation formula compressive strength by ultrasonic pulse test are presented in Fig 2.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1538-1541
• /
• 2005

For reliability evaluation of AC-PDP, one of the most important factor is sealing property. In this paper, the reliability evaluation test method of the commercialized sealing glass frit in AC-PDP was studied. 6 inch AC-PDP panels were tested for evaluation of sealing glass frit by vibration shock test, thermal shock test, non -destructive X-ray inspection, residual stress inspection and residual gas detection. These test methods are proposed as a standard for testing the reliability of sealing glass frit. The main failure mode of sealing glass frit in AC-PDP seems to be the crack propagation from thermal cycling rather than mechanical factor.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.5
• /
• pp.157-161
• /
• 2007

There are technological changes to reduce the size and weight of electronic components and to accommodate multi-functions in them. To meet this trend, more complicated technological processes are required. To maintain the processes, more accurate inspection systems are also necessary. Therefore, new inspection methods are needed, which is differ from conventional inspection methods such as electrical test methods ICT(In-Circuit Test), FCT(Function Test) and visual test using optical equipments. One of the possible approaches is non-destructive test using X-ray. In this paper, an inspection method using X-ray is developed and applied to inspection of soldering state and internal defects of electronic components.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.302-304
• /
• 2004

Nuclear fuel elements containing dry recycling nuclear fuel pellets for the irradiation test in a reactor were remotely fabricated from spent PWR fuel materials in a hot cell. End closure welding as well as seal tube welding for thermal sensor of the elements was performed by Nd:YAG laser. The soundness of the end closure welds and seal tube welds for the elements were evaluated by a precise X-ray inspection system composed of a micro-focus X-ray generator with an image intensifier and a real time camera system. Then, helium leak test was performed for the elements. The soundness of the welds of the fuel elements was confirmed by the X-ray inspection and helium leak test. The irradiation test for the fuel elements were successfully completed at the HANARO research reactor.

• Journal of Adhesion and Interface
• /
• v.4 no.3
• /
• pp.21-32
• /
• 2003

Various methods for adhesion measurement, which are related to previously published paper [J. of Soc. of Adhe. and Inter, 3,4 (2002)], are reviewed. At first, the prerequisite for the ideal adhesion strength measurement is considered, and three categories of methods for adhesion measurement, such as mechanical, non-mechanical methods and miscellaneous methods, are introduced.