• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.913-920
• /
• 2013

This paper presents an applicable basic design that can configure non-contact levitation table for conveying a large sheet of glass. The suggested air levitation table consists of a series of air chambers with porous pads and fans as the conveyor system. The air supply chambers are arrayed to supply an adequately strong upward airflow for supporting the glass. Levitation is controlled by the size and discharge velocity, of the chamber arrays, as well as the glass supporting height. After pre-evaluation of the glass rigidity and the filer functional performance, a one-way fluid structure interface (FSI) analysis is performed for predicting pressure and deflection working of the 8G glass in the transverse and longitudinal directions, respectively. After comparing calculated levels of flatness of the glass, it determines the chamber array for the linear non-contact conveying motion.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.101.3-101.3
• /
• 2010

Glass frit은 실리콘 태양전지의 Ag/Si contact을 위해 필수적이다. 태양전지의 고효율 특성 구현 때문에, Contact resistance(Rc)가 우수한 Pb-frit의 사용이 불가피한 상황이다. 본 연구는 기존의 Pb계를 무연화함과 동시에 동등수준의 효율을 목표로 하였다. Ag 분말 size 및 glass frit의 열적 거동 특성이 SiNx 코팅층 침투와 Ag re-crystallites에 미치는 영향에 대해 평가하였다. 6 inch 다결정 실리콘 웨이퍼를 사용하였으며, softening temperture(Sp)별로 4종의 Bi계 glass frit을 제조 하였고, 분말 size가 다른 3종의 Ag powder를 선정하였다. Glass frit Sp가 $460^{\circ}C$ 이상의 경우에는 효율이 10% 미만이였으나 Sp $460^{\circ}C$ 이하에서는 16% 수준의 효율을 확인할 수 있었다.

• 한국생산제조학회지
• /
• 제23권5호
• /
• pp.435-442
• /
• 2014

This paper describes an improved design model that can be used to configure a non-contact pneumatic device to turn a large sheet at the in-line system. For rotational moving in the conveyor system, the conventional method is to turn the system itself. The improved non-contact pick-up system mainly uses 8 pairs of L-shaped latches and 12 swirl type heads. It is positioned above the upward air flow table. This system performs the non-contact gripping and side-edge contact support in the vertical and rotational directions to hold the self-weight of a large flat sheet. A non-contact air head can exert a sufficient gripping ability at 4N lower than the standard working pressure. The side latches support 60% of the lifting force required. Through structural and flow analysis, the working conditions were simultaneously considered in accordance with the deflection and flatness of the glass.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 추계학술대회 발표 논문집
• /
• pp.138-144
• /
• 2006

Non-contact transportation of a large-sized glass plate using air cushion for the sputtering system of liquid crystal display panel was considered. The gas is injected through multiple small holes to maintain the force for levitating glass plate. Complex flow field and resulting pressure distribution on the glass surface was numerically studied to design the air injection pad. The exhaust hole size was varied to obtain evenly distributed pressure distribution at fixed diameter of the injection hole. Considering the force for levitating glass plate, the diameter of the exhaust hole of 30 to 40 times of the gas injection hole was recommended.

• 반도체디스플레이기술학회지
• /
• 제6권1호
• /
• pp.59-64
• /
• 2007

Non-contact transportation of a large-sized glass plate using air cushion for the vertical sputtering system of liquid crystal display (LCD) panel was considered. The objective of the study was to design an air pad unit which was composed of multiple injection and exhaust holes and mass flow supplying pipe. The gas was injected through multiple small holes to maintain the force for levitating glass plate. After hitting the plate, the air was vented through exhaust holes. Complex flow field and resulting pressure distribution on the glass surface were numerically studied to design the air injection pad. The exhaust hole size was varied to obtain evenly distributed pressure distribution at fixed diameter of the injection hole. Considering the force for levitating glass plate, the diameter of the exhaust hole of 30 to 40 times of the gas injection hole was recommended.

• 반도체디스플레이기술학회지
• /
• 제5권1호
• /
• pp.27-31
• /
• 2006

Non-contact transportation system using air cushion for the manufacturing of large-sized LCD panels was considered. Flow characteristics between air pad and glass plate was analyzed using computational fluid dynamics method to obtain optimized air pad configurations. Effects of the design variables such as hole arrays from which gas is injected, gas-feeding method into the gas supplying channels, and horizontal and vertical pitches of clusters of holes were studied. Optimized air pad unit gave evenly distributed pressure contour on the glass surface and well-suspended levitation height in the experiment.

• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.937-944
• /
• 2013

This paper describes an improved model that can be used for configuring a non-contact pneumatic head to handle a large sheet of glass. The cylindrical head model is of a large size (70 mm). It operates on vortex flow, which can simultaneously generate suction and repulsion over the flat object's surface. The head allows for the minimal non-contact lifting of objects weighing over 3N by using reference conditions (working pressure and head dimensions). Additionally, a functional flow-guide is applied for inducing a developing tangential vortex flow to increase suction and repulsion to the reference head. The cylindrical flow-guide is associated with relatively low tangential velocity. The improved model generates greater lifting force than the reference model, as verified experimentally.

• Tribology and Lubricants
• /
• 제7권2호
• /
• pp.61-66
• /
• 1991

The frictional and wear characteristics of non-asbestos friction materials made of four different fibers (carbon, aramid, ceramic and glass) have been investigated at elevated temperature using High Frequency Friction Tester. On the basis of the experimental results, friction and wear phenomena of four different non-asbestos fibers were caused by lattice layer film of carbon, polymeric transfer film of aramid, abrasion of ceramic and adhesion of glass fiber under each contact junction. The surface analysis of the worn specimens and counter parts after tests were observed using Scanning Electron Microscope and Optical Microscope.

• 한국소음진동공학회논문집
• /
• 제22권10호
• /
• pp.974-984
• /
• 2012

플랫 블레이드 와이퍼의 블레이드의 누름압 분포를 조정하여 역전과정에서 발생되는 진동을 저감하는 방법을 제시하였다. 블레이드와 유리면 사이에 길이방향으로 불균일한 누름압 분포를 도입, 고무스트립에 점진적인 역전을 유도함으로써 역전과정에서 발생하는 충격력을 저감하였다. 블레이드 내의 바디스프링 형상을 이전 연구에서 제시된 방법을 통해 구해진 형태를 적용함으로써 누름압 분포를 조정하였다. 이 방법을 적용하여 전체 길이에 균일한 누름압과 불균일한 누름압을 발생시키는 두 종류의 블레이드를 개발한 다음 누름압을 측정하여 확인하였다. 두 블레이드에서 발생하는 수직방향 및 횡방향 진동을 측정 비교한 결과, 불균일한 누름압을 가진 블레이드가 균일한 누름압의 블레이드에 비해 훨씬 작은 수직방향 진동을 나타냄을 확인하였다.

• Advances in nano research
• /
• 제2권4호
• /
• pp.219-225
• /
• 2014

A simple preparation method on creating superhydrophobic surface using non-aligned carbon nanotubes (CNTs) was demonstrated. Superhydrophobic CNT thin films were prepared by doping a sonicated mixture of CNTs and chloroform onto a glass slide. Water contact angles of the CNT thin films were measured using a contact angle goniometer. The thin films were characterized using laser microscope and scanning electron microscope. Experimental results revealed that the highest average contact angle of $162{\pm}2^{\circ}$ was achieved when the films' thickness was $1.628{\mu}m$. The superhydrophobic surface was stable as the contact angle only receded from $162{\pm}2$ to $157{\pm}2^{\circ}$ after 10 min under normal atmospheric condition.