• 비파괴검사학회지
• /
• 제30권3호
• /
• pp.282-289
• /
• 2010

Most nondestructive testing techniques require good contact between the sensor and tested concrete surface to obtain reliable data. But the surface preparation is often very time and labor consuming due to the rough surface or limited access of concrete structures. One approach to speed up the data collection process is to eliminate the need for physical contact between the sensor and tested structure. Non-contact air-coupled sensing technique can be a good solution to this problem. An obvious advantage of the non-contact air-coupled sensing technique is which can greatly speed up the data collection in field and thus the damage detection process can be completed very rapidly. In this article, recent developments in non-contact air-coupled sensing technique for rapid detection of damages in concrete structures are summarized to evoke interest, discussion and further developments on this technique to a NDT research community in Korea. It is worth noting that the works in this article have been published in the types of thesis, proceedings, and journals. All published sources are cited in the text and listed in reference.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.375-378
• /
• 2002

In this paper, the frequency response separation scheme is proposed for high scanning speed and simple structure of non-contact type of AFM. A self-sensing cantilever is attached on the actuator for detect the atomic force between tip and the media surface. VCM or PZT are used for actuator. This paper presents the method to simplify the actuator structure and the performance of each actuator for non-contact type AFM. Based on the frequency response separation scheme, the only one actuator plays roles 1311owing low frequency surface and modulating self-sensing cantilever tip in contrast with convention non-contact type AFM. 10 ${\mu}{\textrm}{m}$ standard grid sample imaged to verify proposed scheme. This result shows the possibility simplifying the actuator structure and reducing cost of non-contact type AFM.

• 한국융합학회논문지
• /
• 제8권6호
• /
• pp.163-170
• /
• 2017

본 연구는 상호작용 시 유발되는 사회감성 중에 경쟁과 협력을 비접촉 센싱 방법으로 인식하고자 한다. 실험은 경쟁과 협력 상황으로 구분하여 패턴 맞추기 Task를 수행하였다. 데이터 수집은 상반신 영상을 통해 15 Hz 성분의 미동 데이터를 추출하였다. 미동 양과 변화량 그리고 미동의 동조성을 분석하였다. 그 결과 협력 보다 경쟁 시 미동 양과 변화량이 더 큰 것으로 나타났다. 동조성의 경우는 경쟁 보다 협력 시 동조성이 높은 것으로 나타났다. 이는 두 사람이 서로 경쟁 할 때는 이기기 위한 노력을 하고 협력 일 때는 서로 호흡을 맞추기 위한 노력을 하게 되어 움직임에 정도가 차이나는 것으로 볼 수 있다. 본 연구는 생체 반응에 의거한 비접촉식 센싱 방법을 통해 경쟁과 협력의 측정 가능성을 확인하는데 의의가 있다.

• 대한기계학회논문집A
• /
• 제30권12호
• /
• pp.1596-1602
• /
• 2006

In this paper, a hybrid sensor is proposed that has two capabilities: the first is to sense longitudinal or flexural transient vibration signals selectively which are transmitted along the target shaft, and the second to measure the rotating speed of the shaft. All measurements are made in a non-contact manner since this sensor uses magnetostriction as its measuring principle. The signal selection between two vibration modes requires only electrical switching operations and the switching between these two sensing capabilities-vibrations and rotational speed-are accomplished by a very simple mechanical operation. To verify the capabilities of the proposed sensor, a prototype sensor is fabricated and the experiments are made. The results show this sensor can embody two sensing capabilities in one sensor configuration.

• 전기전자학회논문지
• /
• 제20권4호
• /
• pp.454-458
• /
• 2016

일반적으로 원단 후가공시 원단의 가장자리를 핀으로 고정하게 되는데, 이때 원단의 고정 부분의 흠집으로 인해 감긴 원단의 포장 보관 시 변사부분이 부풀어 올라 전체적으로 원단의 변형이 발생한다. 원단의 변형 및 손상은 섬유제품의 품질 저하로 이어지기 때문에 원단 변사부분의 검출은 원단 마무리 가공에서 반드시 필요하다. 본 연구에서는 원단제조시 제품의 품질을 좌우하는 자동 변사 커팅(auto selvage cutting)시스템에 사용하는 비접촉식 변사검출 센서를 연구하였다. 이를 위해 32개의 센서를 2.5mm 간격으로 배열하여 감지하는 센서시스템을 개발하였고 이변사검출센서 시스템으로 실제 변사 검출이 가능한 것을 실험으로 확인 하였다.

• Smart Structures and Systems
• /
• 제22권2호
• /
• pp.223-230
• /
• 2018

This study examines a non-contact laser scanning-based ultrasound system, called an angular scan pulse-echo ultrasonic propagation imager (A-PE-UPI), that uses coincided laser beams for ultrasonic sensing and generation. A laser Doppler vibrometer is used for sensing, while a diode pumped solid state (DPSS) Q-switched laser is used for generation of thermoelastic waves. A high-speed raster scanning of up to 10-kHz is achieved using a galvano-motorized mirror scanner that allows for coincided sensing and for the generation beam to perform two-dimensional scanning without causing any harm to the surface under inspection. This process allows for the visualization of longitudinal wave propagation through-the-thickness. A pulse-echo ultrasonic wave propagation imaging algorithm (PE-UWPI) is used for on-the-fly damage visualization of the structure. The presented system is very effective for high-speed, localized, non-contact, and non-destructive inspection of aerospace structures. The system is tested on an aluminum honeycomb sandwich with disbonds and a carbon fiber-reinforced plastic (CFRP) honeycomb sandwich with a layer overlap. Inspection is performed at a 10-kHz scanning speed that takes 16 seconds to scan a $100{\times}100mm^2$ area with a scan interval of 0.25 mm. Finally, a comparison is presented between angular-scanning and a linear-scanning-based pulse-echo UPI system. The results show that the proposed system can successfully visualize defects in the inspected specimens.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1310-1313
• /
• 1997

Application of eddy current sensing principle for the non-contact estimation of very low concentration of electrolytic solution is presented in this paper. for this application, a new, simple, low-cost, low-power structure for the eddy current sensor is proposed. By measuring the eddy current produced in the conducting electrolytic solution, the concentration is estimated. Therefore, the unknown concentration can be estimated comparing with the database which is prepared as the relation between the change in inductance and various concentrations of electrolytic solution. The concentration, as low as l ppm of the solutioin can be detected by this sensor. It was tested on various low concentration solutions of NaCl. It shows distinct response for various concentrations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.53.3-53
• /
• 2001

This paper deals with the development of a shape inspection system of the Light Guide Panel(LGP), and the study for the performance of the system. The conventional contact sensing methods have been used to inspect the shape. However the contact-sensing methods have some problems. The contact between a tip of the sensor and the surface of objects make a sensor tip abraded and generate a defect on the surface of objects. In this paper, we employed the Non-Contact Optical Sensor[1] to measure the shape inspection system of LGPs, The Sensor composed of Hologram laser[3] unit used for CD Optical Pickup[2] is low cost and has a good performance to measure a transparent objects. From the results of experiments for LGP shape inspection ...

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.251-253
• /
• 2002

We have fabricated a novel Vertical Trench Hall-Effect Device sensitive to the magnetic field parallel to the sensor chip surface for non-contact angular position sensing applications. The Vertical Trench Hall-Effect Device is built on SOI wafer which is produced by silicon direct bonding technology using bulk micromachining, where buried $SiO_2$ layer and surround trench define active device volume. Sensitivity up to 150 V/AT is measured.

• 제어로봇시스템학회논문지
• /
• 제15권11호
• /
• pp.1122-1129
• /
• 2009

Recently taping robot with smart recognition function have been studied in the coil manufacturing field. Due to the difficulty of 3D surface processing from the complicated working environment, it is not easy to accomplish smart tape attachment motion with non-contact sensor. To solve these problems the applicable surface recognition algorithm and a flexible sensing device has been recommended. In this research, the fusion method between 1D displacement and 3D laser scanner is applied for robust tape attachment about cold rolled coil. With these sensors we develop a two-step exploration and the smart algorithm for the awareness of non-aligned coil's information. In the proposed robot system for tape attachment, the problem is reduced to coil's radius searching with laser displacement sensor at first, and then position and orientation detection with 3D laser scanner. To get the movement at the robot's base frame, the hand-eye compensation between robot's end effector and sensing device should be also carried out respectively. In this paper, we examine the auto-coordinate transformation method in the calibration step for the real environment usage. From the experimental results, it was shown that the taping motion of robot had a robust under the non-aligned cold rolled coil.