• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.37-44
• /
• 1999

Because of bone resorption, wear of ultra-high molecular weight polyethylene(UHMWPE) in total knee arthroplasty has been recognized as a major factor in long-term failure of knee implant. The surface damage and the following harmful wear debris of UHMWPE is largely related to contact stress. Most of the previous studies focused on the contact condition only at the articulating surface of UHMWPE. Recently, contact stress at the metal-backing interface has been implicated as one of major factors in UHMWPE wear. Therefore, the purpose of the is study is to investigate the effect of the contact stress for different thickness, conformity friction coefficient, and flexion degree of the UHMWPE component in total knee system, considering the contact conditions at both interfaces. In this study, a two-dimensional non-linear plane strain finite element model was developed. The results showed that the maximum value of von-Mises stress occurred below the articulating surface and the contact stress was lower for the more conforming models. All-polyethylene component showed lower stress distribution than the metal-backed component. With increased friction coefficient on the tibiofemoral contact surface, the maximum shear stress increased about twofold.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.3
• /
• pp.121-129
• /
• 2017

In this paper, the shake table test for the masonry infilled reinforced concrete frame with non-seismic details was carried out in order to evaluate its dynamic behaviour and damage under seismic condition. The tested specimens were the RC frame and the masonry infilled RC frame and the dynamic characteristics, such as a resonant period, acceleration response, displacement response and base shear force response, were compared between them. As a result of the shake table test, RC frame specimen had flexural cracks at the top and bottom of the column and shear cracks at the joints. In the case of masonry infilled RC frame, the damage of the frame was relatively minor but the sliding cracks and diagonal shear cracks on the masonry wall were severe at the final excitation. The resonant period of infilled RC frame specimen was shorter than that of the RC frame specimen because the masonry infill contributed to increase the stiffness. The maximum displacement response of the infilled RC frame specimen was decreased by about 20% than the RC frame specimen. It was analyzed that the masonry infill wall applied in this study contributed to increase the lateral strength of the RC frame with non - seismic detail by about 2.2 times and the stiffness by about 1.6 times.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.117-125
• /
• 2021

Purpose: To purpose of this study is to find the correlation of the Set-up error according to the couch rotation and suggest additional margin setting for the GTV. Target and Method: Each scenario treatment plan was created by making the frequency of non-coplanar beams different among all beams. The set-up error value was measured by using the Exact System and the dose accuracy was evaluated by creating a re-treatment plan. Results: When the couch was rotated by 30°, 45°, 60°, and 90°, the mean of the X-axis values was measured to be 0.29 mm, 0.26 mm, 0.51 mm, and 0.08 mm, respectively. The mean of the Y-axis values was measured to be 0.75 mm, 0.5mm, 0.35 mm, and 0.29 mm, respectively. The mean of the Z-axis values was measured to be 0.5 mm, 0.28 mm, 0.22 mm, and 0.1 mm, respectively. There were dose reductions of 0.1%, 3.1%, 1.9% in D99 for 1-NC VMAT, 2-NC VMAT, and 3-NC VMAT, respectively. Conclusion: When treating with 50% or more of non-coplanar beams among total beams, image verification is required. And it is considered to make the treatment plan by adding a 1.5 mm margin to the GTV.

• Korean Institute of Interior Design Journal
• /
• no.16
• /
• pp.153-160
• /
• 1998

The past and present time are consistent thinking process system which composed of single concept not separated concept. It's common concept for interior designer to how to realize the thinking process system in actual present day. So this paper was focused on purpose of establishing for procedural process theory by approaching typological process system in interior design process. Interior design being composed of typological thinking process system has been headed as a critical issue to how to transplant well between the design and typological objects. Also we have to be needed to know for the process of visual expression and verbal ability to be able to extract the designer's elements from it. Through the process of visual expression and verbal ability to be able to extract the designer's elements from it. Through the process of visual transformation and analysis we have to extract concepts with united design objects. From these process it should be followed adequate adjudgment on the extracted fragments' assembly and dissociation methods through physical limitation of elements functionality and feasibility's measurements. Therefore from the morphological designed results reflected to typological concepts finished material detail and texture we should be able to take the integrated thinking process system. Lastly interior designer should be able to check whether it was best choice from the consistent design feedback process to ask whether it contains the conceptual design process and new typological objects without non-conformity between past and present days in interior space. Now we should be asked for development of practical design process to be able to realize above assumptions called "Development and Suceeding of Cultural Value System'. Additionally, we have to continue to develop for our true meaning of interior design process, not repetition of past's imitation.tion.

• International Commerce and Information Review
• /
• v.17 no.3
• /
• pp.177-201
• /
• 2015

Korea-China FTA was initialized in 2015. Korea has a high level of dependence on trade for its economic growth, especially to China. Technical Barriers to Trade(TBT) among various non-tariff barriers is becoming increasingly important. Elimination of TBT is one of the key issues in which the South Korean government is interested since technical barriers significantly affect trade between the two countries. MRA has been considered as an effective tool to relieve such technical barriers. Several studies and surveys showed that MRA would mitigate the barriers of import and solve the problems that many companies face in international market. This study tries to seek utilization plan of MRA for Korea-China FTA. It suggests suitable utilization plan of MRA considering the difference of technical regulations between two countries. This paper has value in that it provides specific MRA strategies targeting China while other prior studies have merely analyzed the necessity of MRA.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.3 s.28
• /
• pp.351-361
• /
• 1988

The purpose of this study was to investigate the relationships between fashion style adoption and consumers' demographic characteristics, selection criteria and use of fashion information sources respectively and find out how their concerned variables influenced high fashion style adoption. For this study, the questionnaire was administered to a sample of 554 female adults in Kwangju. frequency distribution, Mean, Pearson's Correlation, Analysis of variance and Path Analysis were used fer the statistical analysis. The results obtained were as followers. 1) Level of fashion style adoption showed a normal distribution like a wave. 2) Consumer's demographic characteristics variables, such as age, educational level and income significantly associated with fashion style adoption. Younger consumers adopted tile high fashion style 41)an more aged consumers. while consumers in higher educational and income level adopted high fashion style than consumers in lower. 3) Among individuality, conformity, practicality and economy in selection criterias, only individually and practicality associated with fastion style adoption in clothing purchase. In the case of the high fashion style adoption, purchasing with individuality was increased, while purchasing with practicality was decreased. 4) The use of marketer dominated sources in fashion information sources significantlyassociated with fashion style adoption. In the case of high fashion style adoption, the use of marketer dominated and neutral information sources was higher. 5) The use of marketer dominated information sources had a main effect on high fashion style adoption in clothing purchase. Especially in the group composed of college students and occupational women, individuality and praticality as selection criterias came to be important effects. While in the group composed of housewives and non-occupational single women, age, educational level and income came to be important effects.

• Journal of environmental and Sanitary engineering
• /
• v.22 no.4
• /
• pp.119-130
• /
• 2007

Sea food wastewater including high concentration of organics and nutrients is hard to treat stably by established traditional activated sludge process. This research is aimed to obey more and more of strengthened the law and to secure stable effluents by using advanced treatment process applied membrane filter in aeration tank for treatment of wastewater from marine products. It must maintain pH of influent over 6.0 to keep up stably biological sludge of advanced treatment process. At 38hr of HRT, removal rates of TBOD and TCOD were 99.9% and 99.4% respectively and TSS also removed with high efficiency. Most organics in the effluent was constituted with soluble type materials, it caused that membrane filter installed aeration tank should remove minute suspended particles. The reactor was operated well to get stable treatment results for operation period, in spite of high loading of organics like that $0.67{\sim}1.67\;kgTBOD/m^3/day$ of organics loading and $0.10{\sim}0.21\;kgBOD_5/kgMLSS/day$ of F/M ratio. At $36{\sim}48hr$ of HRT, removal rates of T-N and T-P were $89.7{\sim}90.7%\;and\;91.5{\sim}96.0%$ respectively. It means this treatment process also work to remove nutrients of high concentration. Upon investigation of advanced treatment's operation factors, optimum SRT was about 30days and average SNR that showed tendency to increase according to increase water temperature was calculated 0.014 gN/g MLVSS/d. SDNR was risen in conformity to increase F/M ratio of Non-aeration tank and investigated as $0.038{\sim}0.051\;gN/gMLVSS/d$.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.55
• /
• pp.155-181
• /
• 2012

This study considered as precautions in light of practical affairs related to a claim for damages focusing on CISG (1980) and PICC (2004). Given summarizing contents of this study, those are as follows. First, when exercising a claim for damages, proving the damages may be difficult and hard. Thus, there is necessity for stating the liquidated damages clause in contract given conclusion of contract. Second, as for the application of interest rate given a claim for interest, CISG is not covered interest rate. PICC is covered interest rate. However, there is possibility that PICC will not be applied as general principles. Thus, to remove this insecurity and uncertainty, there is necessity for stating this in contract by deciding on the detailed standard stipulation after fully discussing about interest payment with the counterpart given sale contract. Third, when a seller delivered non-conformity of the goods for contract, a buyer is desirable to exercise by discreetly judging the exercise method or limitation element on a problem of selecting and exercising remedy favorable to oneself out of a claim for damages and a right to reduce the price. Finally, There was suggestion that the contract parties are desirable to utilize by modifying and supplementing properly this in line with own business-based necessity and situation based on the ICC Model International Sale Contract, and to state CISG and PICC the governing law clause, in preparing contract. This study is expected to possibly become guideline in which the damaged party exercises a claim for damages or aims to cope with the counterpart's exercising a claim for damages.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.44
• /
• pp.31-55
• /
• 2009

This study attempts to provide a comparative overview of the liability systems Korean law and the PELS adopt, that is, the approaches taken by Korean law and the PELS to deal with various irregularities of contractual performance. In addition, it examines in a comparative way the questions of what is the position of the seller's liability for his delivery of defective goods under the chosen liability system and what is the legal nature of the seller's liability. The study finds that the dual liability system taken by Korean law has caused some complexities as to the matter of which liability is applicable in some borderline cases. The problem in such complexities is originated in that the remedies available and the limitation period applicable are differentiated in accordance with one's different categorization among three types of default under the general liability and defective performance under the seller's guarantee liability. In this light, the study argues that the unified liability system under the PELS is superior because its concept of non-performance embraces in a unitary manner all the aspects of default including defects in quality, quantity and title. In addition, it finds that Korean law has suffered endless debates on the question of what are the true contents of the same remedies of rescission and damages provided under the seller's guarantee liability as under the general liability. The debates have been come along on the basis of the traditional presumption among some of civil law jurisdictions that two liabilities be different in terms of not only their legal nature but also their contents of remedies. The study argues that the problem may be circumvented, first, by another way of thinking that the unified liability in Korean law is inferred from the specification of the identical remedies for both the general liability and the seller's guarantee liability under the KCC, second, by the preposition that the requirement of fault be depended upon what remedy the buyer seeks to claim rather than what liability he does to rely on.

• Food Science of Animal Resources
• /
• v.21 no.4
• /
• pp.367-373
• /
• 2001

Glycoproteins PAS-6(50 kDa) and -7(47 kDa) from the bovine milk fat globule membrane share a common protein core but differ in their carbohydrate moiety. We have analyzed and proposed the structures of the N-linked sugar chains of PAS-7 by Oxford Glyco System(OGS) RAAM2000. The N-linked sugar chains were liberated from PAS-7 by hydrazinolysis and, after modifying the reducing ends with 2-aminobenzamide(2-AB), were separated into one neutral(7N, 55%) and two acidic(7M, mono-, 43%; 7D, di-, 2%) sugar chain groups. 7N was finally separated into 5 chains(a, b, c, d, and e), respectively. The structure of this 2AB-neutral sugar chain was determined by sugar analysis, exoglycosidase digestion with OGS glycosidase Kit and OGS RAAM2000 system. The results show that fraction e was the same of reported 7N1A, the biantennary complex type with a fucose on reducing end and two N-acetyllactosamine branch on non-reducing end. Therefore, it was proved that OGS RAAM2000 method is in conformity with conventional analysis of sugar chain structure from bovine PAS-7.