• Science of Emotion and Sensibility
• /
• v.18 no.2
• /
• pp.19-30
• /
• 2015

The healing effect of the aroma treated fabrics with lavender and lemon aromas was investigated by assessing the autonomic nervous responses of human body. For this cause Lemon and lavender microcapsules were coated on a cotton fabric using a water-based acrylic binder, respectively. And the study created a total of four aroma treated fabrics at a concentration of 2% and 5% respectively. Electrocardiogram(ECG), skin conductance, and Blood flow, of ten participants were measured for 30 sec at a stable condition, at a stress status (working memory task), and at a stimulation status (after rubbing aroma treated fabrics). Subjective sensibilities of the aromas were also evaluated. With regard to the responses of the autonomic nervous system, in order to understand how the values gained after the normalization process would cause different physiological signals between the stable state and the aroma-stimulated state as well as between the stress state and the aroma-stimulated state, the study conducted a non-parametric test, friedman test as well and analyzed tendencies. LF/HF turned out to be significantly different to the stress state, and according to the results of the post-hoc comparison, lemon 5% presented statistically significant differences among the lavender 2%, lavender5%, lemon2%. Lemon 5% stimuli increased stress but stimuli consisting of the lavender 2%, the lavender 5% and the lemon 2% decreased stress because of a psychological rest. And the stimuli of the lavender 2%, the lavender 5%, the lemon 2% presented a healing effect in this research.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.3
• /
• pp.296-302
• /
• 2007

This study was conducted to evaluate the effect of slow release fertilizers (SRF), crotonylidene diurea (CDU) and latex coated urea (LCU), on nitrogen (N) use efficiency (NUE) and nitrate-N leaching in a silty clay loam soil under polyethylene film mulching (PFM) for sesame cultivation. In PFM plot, concentrations of $NO_3-N$ and $NH_4-N$ in SRF applied soils were less than that in the urea plot during the whole growing period. However, $NO_3-N$ and $NH_4-N$ in all the non-mulched plots (NM) were not significantly different. Urea-N in soil treated with SRF was higher than urea plot until 50 days after application and was comparable in all the treatments after 50 days. $NO_3-N$ concentrations in leached solution in 21 days after urea fertilization in PFM and NM were 26 mg $L^{-1}$ and 83 mg $L^{-1}$, respectively. However, $NO_3-N$ in leached solution at applied CDU and LCU was less than that of urea similar to nitrate concentration in soil. $NO_3-N$ in leached solution in applied CDU and LCU in 44 days after application was about 25% lower than that urea plot and PFM, while the $NO_3-N$ concentration of CDU and LCU treatment in NM did not changed. Application of SRF increased the yield of sesame and N recovery compared to urea and there was a little difference between SRF and N levels. In conclusion, application of 80% N level with SRF increased N recovery and reduced nitrate leaching without reduction of yields compared with urea application.

• Journal of the Korean institute of surface engineering
• /
• v.40 no.6
• /
• pp.254-257
• /
• 2007

TiN coating on tool steel has been widely used for the improvement of durability of tools. In this work, radical nitriding(RN) is carried out on SKD61 at $450^{\circ}C$ for 5 hours in the ammonia gas pressure $2.7{\times}10^3\;Pa$. The TiN coating is carried out by arc ion plating(AIP) with the process parameters: arc power 150 A, bias voltage -50V, coating time 40 minutes and nitrogen gas pressure $4{\times}10^3\;Pa$. Hardness, elastic modulus, friction coefficient and adhesion of TiN coating on substrates of both TiN/SKD61 and TiN/RN SKD61 coatings are investigated comparatively. The primary crystalline faces of TiN surface are(200) and(111) for TiN/SKD61 and TiN/RN SKD61 respectively. In addition to the primary phase, Fe phase exists in TiN/SKD61 coating, but not in TIN/RN SKD61. The hardness of TiN/RN SKD61 is about 700 Hv, 250 Hv(56%) higher than that of TiN/SKD61 at the near interface of TiN and substrates. At the TiN surface, hardness of TiN/RN SKD61 is 2,149 Hv, 71 Hv(3%) higher than that of TiN/SKD61. The elastic modulus of TiN coating is improved to 26.7 GPa(6%) by radical nitriding. The adhesion is improved by the RN coating showing no spalling. buckling and chipping on the scratch test track which are shown on the non-RN TiN/SKD61.

• Journal of Periodontal and Implant Science
• /
• v.38 no.1
• /
• pp.59-66
• /
• 2008

Purpose: It has been shown that the inorganic polyphosphate is effective for the regeneration of bones through the preliminary animal test of rabbits. The most effective concentration of the polyphosphate, however, is not known yet. Moreover, the effectiveness of carriers inside human body is not confirmed.. Materials and Methods: In this study, we examined the effect of the concentration of the inorganic polyphosphate on the process of the bone regeneration using the 6 weeks old rabbits with the weight of 2.0 kg in average. We performed the experiment using TR-ePTFE membrane(membrane) filled with collagen immersed in 4%, 8% of inorganic polyphosphate, respectively, following removal of the proper sized cortical bones from the rabbit calvaria. The experimental results were compared with the one of the following four groups: The negative control group for membrane only, the positive control group for membrane filled with collagen, the first experimental group for membrane filled with collagen immersed in 4% of inorganic polyphosphate, and the second experimental group for membrane filled with collagen immerse in 8% of inorganic polyphosphate. The fragments of the tissue with membrane obtained from each group of the sacrificed rabbits for 8 or 16 weeks sustained after surgery were then prestained by the Hematoxylin-Eosin stain and coated by resin to form non-decalcified specimens for the histologic examination and analysis. New bone formation was assessed by histomorphometric and statistical analysis. Results: 1. All groups have shown better bone regeneration at 16weeks than 8weeks. 2. Negative control group has shown more bone regeneration relative to the other groups at 8 and 16 weeks. 3. All experimental groups have shown better bone regeneration relative to positive control group. 4. At 16 weeks, the first experimental group has shown more bone regeneration compared to the second experimental group. Exophytic bone formation is not good at the first and the second experimental groups compared with negative control group. But, the use of 4% inorganic polyphosphate was more effective to bone formation than the use of 8% inorganic polyphosphate. Conclusion: With above results, it is suggested the use of inorganic polyphosphate with vehicle under TR-ePTFE membrane.

• Journal of Life Science
• /
• v.26 no.8
• /
• pp.963-969
• /
• 2016

Kinesin superfamily proteins (KIFs) are microtubule-dependent molecular motor proteins essential for the intracellular transport of organelles and protein complexes in cells. Kinesin 1 is a member of those KIFs that transport various cargoes, including organelles, synaptic vesicles, neurotransmitter receptors, cell signaling molecules, and mRNAs through interaction between its light chain subunit and the cargoes. Kinesin light chains (KLCs) are non-motor subunits that associate with the kinesin heavy chain (KHC) dimer. KLCs interact with many different binding proteins, but their particular binding proteins have not yet been fully identified. We used the yeast two-hybrid assay to identify proteins that interact with the tetratricopeptide repeat (TPR) domain of KLC1. We found an interaction between the TPR domain of KLC1 and Wiskott-Aldrich syndrome protein family member 1 (WAVE1), a member of the WASP/WAVE family involved in regulation of actin cytoskeleton. WAVE1 bound to the six TPR domain-containing regions of KLC1 and did not interact with KHCs (KIF5A, KIF5B, and KIF5C) in the yeast two-hybrid assay. The carboxyl (C)-terminal verprolin-cofilin-acidic (VCA) domain of WAVE1 is essential for interaction with KLC1. Also, other WAVE isoforms (WAVE2 and WAVE3) interacted with KLC1 in the yeast two-hybrid assay. When co-expressed in HEK-293T cells, WAVE1 co-localized with KLC1 and co-immunoprecipitated with KLC1 and KIF5B. These results suggest that kinesin 1 motor protein may transport WAVE complexes or WAVE-coated cargoes in cells.

• Membrane Journal
• /
• v.21 no.1
• /
• pp.62-71
• /
• 2011

Highly enriched oxygen is used in energy-efficient combustion due to decreased non-flammable nitrogen, while high purity nitrogen is used for explosion proof in the LNG ships and keeping the freshness of green stuffs. Membrane technology can be used in these $O_2$ and $N_2$ generation with low energy consumption. In this study, PES was used as a membrane material and 1-methyl-2-pyrollidone (NMP) and acetone were employed as a good solvent and nonsolvent addictive (swelling agent to PES), respectively. Dope solutions were prepared by changing the content of acetone (0, 6.5, 15, 25, 31.5 wt%) in 37 wt% PES solutions. Hollow fiber spinning was performed at 0~10 cm of air-gap distances for each dope solution. $O_2/N_2$ selectivity and permeability were investigated by comparing of hollow fibers coated or not by silicons. $O_2/N_2$ selectivity increased and permeance of $O_2$ and $N_2$ decreased with increasing air-gap height independently of acetone addictions. Optimized PES hollow fibers were obtained with 37/6.5/56.5 wt% PES/acetone/NMP dope solution and 10 cm air-gap, which showed 7.3 of $O_2/N_2$ selectivity and 4.3 GPU of $O_2$ permeability after silicon coating.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.6
• /
• pp.991-998
• /
• 2008

This study is to determine the effects of PCM concentration on the temperature changes of the air layers of a garment when the environmental temperature changes. The selected PCM was Nonadecane and coated on cotton fabrics with PCM concentrations 10%, 20%, and 30%. The temperature changes of the air layers between fabrics were measured by Human-Clothing-Environment Simulator which measure a dynamic heat transfer. After stabilizing at $34^{\circ}C$ for 1 hour, the multi layered garment system were exposed to $5^{\circ}C$ or $10^{\circ}C$ for 30 minutes and then, exposed to $34^{\circ}C$ for 30minutes. The results like following could be obtained. When the environmental temperature changed high to low, temperature of the air layer increased by heating effect of PCM. In the contrast, when the environmental temperature changed low to high, the temperature increase of the air layer was delayed because of cooling effect by PCM. Also, the more concentration of PCM, the bigger the heating effect. Cooling effect showed more clearly at PCM concentration 20%. The temperature differences of the air layers between with PCM fabrics and with non-PCM fabrics were bigger at $10^{\circ}C$ than at $5^{\circ}C$. Consequently, though PCM has influenced on the temperature of the air layer by heating and cooling effect, those effects haven't shown in all layers equally. It was shown that the effect of PCM varied according to the layer in the case of multi layered garment system and heat gain as well as heat loss in the outermost layer had to be taken into account.

• Membrane Journal
• /
• v.22 no.1
• /
• pp.8-15
• /
• 2012

Tubular $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ membranes with $La_{0.6}Sr_{0.4}Ti_{0.3}Fe_{0.7}O_{3-{\delta}}$ porous coating layer were prepared by extrusion and dip coating technique. XRD and SEM result showed the tubular membrane possessed the perovskite structure and porouscoating layer (thickness= about $2{\mu}m$) in surface. The oxygen permeation test was measured at condition of ambient air (feed side) and vacuum (permeate side) in the temperature range from 750 to $950^{\circ}C$. The oxygen permeation flux of $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ tubular membrane with $La_{0.6}Sr_{0.4}Ti_{0.3}Fe_{0.7}O_{3-{\delta}}$ porous coating layer reached maximum $3.2mL/min{\cdot}cm^2$ at $950^{\circ}C$ and was higher than non-coated $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ tubular membrane. Long-term stability test result indicated that the oxygen permeation flux was quite stable during the 11 day.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.289-289
• /
• 2013

While there are plenty of studies on synthesizing semiconducting germanium nanowires (Ge NWs) by vapor-liquid-solid (VLS) process, it is difficult to inject dopants into them with uniform dopants distribution due to vapor-solid (VS) deposition. In particular, as precursors and dopants such as germane ($GeH_4$), phosphine ($PH_3$) or diborane ($B_2H_6$) incorporate through sidewall of nanowire, it is hard to obtain the structural and electrical uniformity of Ge NWs. Moreover, the drastic tapered structure of Ge NWs is observed when it is synthesized at high temperature over $400^{\circ}C$ because of excessive VS deposition. In 2006, Emanuel Tutuc et al. demonstrated Ge NW pn junction using p-type shell as depleted layer. However, it could not be prevented from undesirable VS deposition and it still kept the tapered structures of Ge NWs as a result. Herein, we adopt $C_2H_2$ gas in order to passivate Ge NWs with carbon sheath, which makes the entire Ge NWs uniform at even higher temperature over $450^{\circ}C$. We can also synthesize non-tapered and uniformly doped Ge NWs, restricting incorporation of excess germanium on the surface. The Ge NWs with carbon sheath are grown via VLS process on a $Si/SiO_2$ substrate coated 2 nm Au film. Thin Au film is thermally evaporated on a $Si/SiO_2$ substrate. The NW is grown flowing $GeH_4$, HCl, $C_2H_2$ and PH3 for n-type, $B_2H_6$ for p-type at a total pressure of 15 Torr and temperatures of $480{\sim}500^{\circ}C$. Scanning electron microscopy (SEM) reveals clear surface of the Ge NWs synthesized at $500^{\circ}C$. Raman spectroscopy peaked at about ~300 $cm^{-1}$ indicates it is comprised of single crystalline germanium in the core of Ge NWs and it is proved to be covered by thin amorphous carbon by two peaks of 1330 $cm^{-1}$ (D-band) and 1590 $cm^{-1}$ (G-band). Furthermore, the electrical performances of Ge NWs doped with boron and phosphorus are measured by field effect transistor (FET) and they shows typical curves of p-type and n-type FET. It is expected to have general potentials for development of logic devices and solar cells using p-type and n-type Ge NWs with carbon sheath.

• Current Research on Agriculture and Life Sciences
• /
• v.2
• /
• pp.56-62
• /
• 1984

This experiment was carried out to investigate the effects of distilled water, pH, uv-irradiation, carrier, emulsifier and organic solvent on the stability of butachlor formulations in the course of storage. The uv-irradiation increased the decomposition rate of butachlor formulations in the order of emulsifiable concentrate, sand coated granular and zeolite adsorbed granular. Decomposition of butachlor emulsion was not affected by water and pH. Decomposition of butachlor emulsifiable concentrate which were prepared with various organic solvents at $50^{\circ}C$ was higher in the polar organic solvents than in the non-polar organic solvent. Decomposition of butachlor-emulsifiable concentrate emulsified in Tween-60 was higher than in Hy-620C or Newkalgen-MC.