• Journal of the Korean Applied Science and Technology
• /
• v.16 no.3
• /
• pp.237-240
• /
• 1999

This study showed that the optimized cleaning process using non-aqueous cleaning solvents is adaptable in the industrial field for existing 1.1.1-TCE cleaning solvents which is an ozone depleting sustance. Alternative cleaning solvent system substituted for existing cleaning solvent against non-aqueous pollutants(cutting & flux oil), was evaluated for the cleaning efficiency using gravimetric analysis method and surface change of sample by Image analyzer. The results showed that alternative solvents and process had excellent cleaning efficiency.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.567-568
• /
• 2006

To investigate the recycle possibility of slurry for the oxide-chemical mechanical polishing (oxide-CMP) application, three kinds of retreated methods were introduced as follows: First, the effects on the addition of silica abrasives and the diluted silica slurry (DSS) on CMP performances were investigated. Second, the characteristics of mixed abrasive slurry (MAS) using non-annealed and annealed alumina ($Al_2O_3$) powder as an abrasive added within DSS were evaluated to achieve the improvement of removal rates (RRs) and within-wafer non-uniformity (WIWNU%). Third, the oxide-CMP wastewater was examined in order to evaluate the possible ways of reusing it. And then, we have discussed the CMP characteristics of silica slurry retreated by mixing of original slurry and used slurry (MOS).

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2005.09a
• /
• pp.221-227
• /
• 2005

THEMATICS is a simple computational method for predicting functional sites in proteins. The method computes the theoretical titration curves of the ionizable residues of a protein using its 3D structure, determines the residues with perturbed, non-Henderson-Hasselbalch titration behavior, and identifies clusters of these perturbed residues in physical proximity. We have shown previously that this method is highly successful in predicting catalytic sites in enzymes. In the present study, we apply the method to non-catalytic ligand-binding proteins. It is shown that THEMATICS can predict non-catalytic binding sites. The success rate is better than 80 % for a set of 30 non-catalytic, ligand-binding proteins. The application of the method to Glutamine-binding protein from E. coli is discussed in detail.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.5
• /
• pp.399-404
• /
• 1994

The non-Newtonian viscosities (the specific or intrinsic viscosities) of poly(L-proline) (PLP, $M_v$=19,000 and 32,000) in various mixed-solvent systems like water-propanol and acetic acid-propanol of varying compositions were measured during the reverse mutarotation (Form II ${\rightarrow}$Form I) by the application of external pressure (up to 4.5 psi). The non-Newtonian viscosity effect was found to be larger in acetic acid-propanol system than in water-propanol system and to somewhat decrease during the reverse mutarotation at a given solvent system. The non-Newtonian viscosity behavior of PLP in aqueous salt ($CaCl_2$) solution was also studied, from which it was found that the degree of the non-Newtonian effect decreased with increasing salt concentration, and increased with increasing PLP molecular weight. These findings could be explained in terms of conformational changes of PLP in solution (like the helix-helix or helix-coil transition) involved.

• Journal of the Korean Vacuum Society
• /
• v.18 no.1
• /
• pp.49-53
• /
• 2009

The chemical properties of SiOC film was studied for inter-layer insulator. SiOC film was formed with non polarity due to the appropriate union by the alkyl and hydroxyl group. An amorphous structure of non polarity can induce the low dielectric constant materials. The chemical properties of thin film can define the bonding structure owing to the ionic variation, and the analysis of chemical properties was researched by the carbon content using the FTIR spectra, and induced the film with non polarity. The electrical properties is the electron flow, and is always not the same as the chemical properties. The electrical properties of SiOC film with various flow rate ratios was analyzed and researched the correlation between the chemical properties. SiOC film showed the increasing of the leakage current after annealing process, and abruptly increased the carbon content at some samples. But the sample with increasing the carbon content decreased the leakage current. It means that the chemical properties is not the same as the electrical properties, and the carbon is related with the variation of the bonding structure, and does not contribute the current flow.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.1
• /
• pp.60-69
• /
• 2023

Objectives: Business operators handling hazardous chemicals regulated under the Chemical Substances Control Act (CSCA) must receive permits to operate their business from the Ministry of Environment. This study analyzed the status of recent legal violation in chemical handling workplaces in Ulsan where a large volume of chemicals is handled for industrial use. Methods: A total of 557 corporations have been granted legal status as business operators in Ulsan. For all business operators, legal violations in regard to the CSCA that were discovered by the environmental office in the last five years (2018~2022) were thoroughly analyzed. Results: A total of 225 violations of the CSCA have been discovered at 165 corporations, with the violation rate accounting for approximately 27% of all business operators. In particular, 22% of the 165 violators (36 corporations) were discovered to have violated twice or more, and some business operators (6%) even violated in consecutive years. Non-compliance of facility inspection was the most frequent violation (45 cases, 20.1%), followed by non-reporting of important changes in the permitted matters (23 cases, 10.3%), non-completion of legal safety education (19 cases, 8.5%), failure to secure permission for modification in the permitted matters (18 cases, 8.0%), and failure to submit chemical transport plans (16 cases, 7.1%). Conclusions: Most of the violations could have been prevented if the field personnel had paid sufficient attention. Thus, it is fundamentally necessary to create an environment for spontaneous safety management for themselves and to strengthen individual capabilities.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.450-462
• /
• 2008

The physical chemistry (PC) articles published in the Bulletin of the Korean Chemical Society (BKCS) from 2003 to 2007 are surveyed, and in-depth content analysis was conducted to classify the PC articles into 12 topics used in The Journal of Physical Chemistry (JPC). The PC articles published in the Journal of the American Chemical Society (JACS) in 2007 are also surveyed. The extensive summary of all PC articles in BKCS for the last five years reveals the current trend of physical chemistry research in Korea. The comparison study with the JACS shows that the proportion of PC articles among all articles published in BKCS (16%) is slightly higher than that of JACS (11%), and the non-Korean authorship ratio of BKCS (12%) is very low compared with the non-US authorship of JACS (52%). From the comparison study with articles published in JPC in 2007, it is found that BKCS disseminates various topics of physical chemistry researches adequately. In particular, BKCS most frequently published PC articles in molecular structure and spectroscopy topics, whereas JPC published surface chemistry and nano-chemistry articles most frequently. It is concluded that BKCS should publish more articles to be a leading journal, and it is suggested that the SCI impact factor of BKCS must be increased by improving the electronic version of BKCS.

• Journal of Surface Science and Engineering
• /
• v.55 no.6
• /
• pp.441-447
• /
• 2022

Silicon-based materials are one of the most promising anode active materials in lithium-ion battery. A carbon layer decorated on the surface of silicon particles efficiently suppresses the large volume expansion of silicon and improves electrical conductivity. Carbon coating through chemical vapor deposition (CVD) is one of the most effective strategies to synthesize carbon- coated silicon materials suitable for mass production. Herein, we synthesized carbon coated SiOx via pilot scale CVD reactor (P-SiO_x@C) and carbon coated SiO_x via industrial scale CVD reactor (I-SiO_x@C) to identify physical characteristic changes according to the CVD capacity. Reduced size silicon domains and local non-uniform carbon coating layer were detected in I-SiO_x@C due to non-uniform temperature distribution in the industrial scale CVD reactor with large capacity, resulting in increased surface area due to severe electrolyte consumption.

• 한국가스학회:학술대회논문집
• /
• no.5
• /
• pp.137-142
• /
• 2002

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.7
• /
• pp.89-96
• /
• 2006

The combustion temperature in gas generator should be kept below around 1,000K to avoid any possible thermal damages to turbine blade by adopting either fuel rich or oxidizer rich combustion. Thus, non-equilibrium chemical reaction dominates in the gas generator. Meanwhile, Kerosene is a compounded fuel mixed with various types of hydrocarbon elements and difficult to model the chemical kinetics. This study focus to model the non-equilibrium chemical reaction of kerosene/LOX with detailed kinetics developed by Dagaut using PSR(Perfectly stirred reactor) assumption. Also, droplet evaporation time is taken into account by calculating for the residence time of droplet and by decoupling reaction temperature from the reactor temperature. In Dagaut’s surrogate model for kerosene, chemical kinetics of kerosene consists of 1592 reaction steps with 207 chemical species. The comparison of calculation results with experimental data could provide very reliable and accurate numbers in the prediction of combustion gas temperature, species fraction and other gas properties.