• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.5
• /
• pp.340-350
• /
• 2015

This experiment was carried out to find out the mitigation of greenhouse gases (GHGs) emission and changes of soil carbon contents in the cropland. In order to minimize the soil disturbance, this study was conducted without crop cultivation at the pots treated with different biomass. Different biomass was buried in the soil for 12 months. Decomposition rates of expander rice hull, pig manure compost and carbonized rice hull were 18%, 11~11.5% and 0.5~1.2%, respectively. It was appeared that carbonized rice hull was slightly decomposed. No difference was shown between chemical fertilizer treatment plot and non-application plot. It was appeared that soil carbon content in the non chemical fertilizer application plot was high when compared to its chemical fertilizer. Its content at soil depth of 20 cm more decreased than the upper layer of soil. Accumulative emission of $CO_2$ with different treatments of biomass was highest of 829.0~876.6 g $CO_2m^{-2}$ in the application plot of PMC (Pig Manure Compost) regardless of chemical fertilizer treatment during 16 months of experiment. However, the emission for expander rice hull treatment plot was lowest of 672.3~808.1 g $CO_2m^{-2}$. For application plot of the carbonized rice hull, it was shown that non chemical fertilizer plot, 304.1 mg $N_2Om^{-2}$, was higher than the chemical fertilizer treatment, 271.6 mg $N_2Om^{-2}$. Greenhouse gas emissions in the PMC treatment were highest of 0.94 ton $CO_2eqha^{-1}yr^{-1}$. However, it was estimated to be the lowest in the expander rice hull treatment.

• Journal of Marine Bioscience and Biotechnology
• /
• v.6 no.2
• /
• pp.110-117
• /
• 2014

Recently microalgae have been proposed as a promising biodiesel feedstock, owing to their higher lipid productivity and non-arable land based cultivation system. Biomass and lipid productivities of microalgae are largely affected by various environmental and nutritional factors. In this study, the effects of nitrogen (nitrate and ammonium) and organic carbon (glucose and glycerol) sources on the cell growth and lipid production of Chlorella sp. KR-1 were examined in flask cultures. Under autotrophic culture conditions for 15 days, overall cell growth and lipid (fatty acid methyl ester, FAME) production with nitrate were better than those of ammonium, resulting in 1.06 g cell/L and 333 mg FAME/L, respectively. Maximal intracellular lipid contents (348 - 352 mg FAME/g cell) were observed at low concentrations of 1 mM for both nitrate and ammonium. In the supply of light, addition of glucose in the range of 1 - 20 g/L showed higher cell densities than the autotrophic cell growth condition. Higher lipid accumulation of 375 mg FAME/g cell could achieved at 5 g glucose/L albeit of relatively short incubation of 7 days. With glycerol, intracellular lipid contents were ~1.9 times lower than glucose cases although similar cell growths were observed for both carbon sources.

• Polymer(Korea)
• /
• v.28 no.4
• /
• pp.285-290
• /
• 2004

Nondestructive damage sensitivity of carbon nanotube(CNT) and nanofiber (CNF)/epoxy composites with their adding contents was investigated using electro-micromechanical technique. Carbon black (CB) was used only for the comparison with CNT and CNF. The fracture of carbon fiber was detected by acoustic emission (AE), which was correlated to the change in electrical resistance, ΔR under double-matrix composites (DMC) test. Stress sensing on carbon nanocomposites was performed by electro-pullout test under uniform cyclic loading. At the same volume fraction, the damage sensitivity for fiber fracture, matrix deformation and stress sensing were highest for CNT/epoxy composite, whereas for CB/epoxy composite they were the lowest among three carbon nanomaterials (CNMs). Damage sensitivity was correlated with morphological observation of carbon nanocomposites. Homogeneous dispersion among CNMs could be keying parameters for better damage monitoring. In this study, damage sensing of carbon nanocomposites could be evaluated well nondestructively by the electrical resistance measurement with AE.

• Journal of Powder Materials
• /
• v.10 no.6
• /
• pp.390-394
• /
• 2003

Ultra fine titanium carbide particles were synthesized by novel metallic thermo-reduction process. The vaporized TiC1$_4$+$CCl_4$ gases were reacted with liquid magnesium and the fine titanium carbide particles were then produced by combining the released titanium and carbon atoms. The vacuum treatment was followed to remove the residual phases of MgC1$_2$ and excess Mg. The stoichiometry, microstructure, fixed and carbon contents and lattice parameter were investigated in titanium carbide powders produced in various reaction parameters.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.4
• /
• pp.409-414
• /
• 2008

Porous carbon electrode for electrosorption was prepared by a wet phase inversion method. Carbon slurry that was a mixture of activated carbon powder(ACP) and PVdF solution was cast directly upon a graphite sheet by means of a casting knife. Porous carbon electrodes were fabricated by immersing the cast film in pure water as a non solvent. Physical and electrochemical properties of carbon electrodes prepared with various ACP contents(50.0, 75.0, 83.3, 87.5, 90.0 wt %). From the SEM images we can verify that the electrode was porous. The average pore sizes determined for the electrodes fabricated with various ACP contents ranged from 72.7 to 86.4 nm and the size decreased as the ACP content increased. The electrochemical properties were characterized by cyclic voltammetry(CV) method. All of the voltammograms showed typical behavior of an electric double layer charging/discharging on the carbon surface. The capacitance increased with the ACP content and the values ranged from 2.18 F/cm$^2$ for 50 wt% ACP to 4.77 F/cm$^2$ for 90 wt% ACP.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.2
• /
• pp.59-64
• /
• 2013

The present study is to evaluate physical and mechanical properties of porous concrete having non cement that mainly causes carbon emission. This study aims to explore eco-friendly concrete technology capable of reducing the amount of carbon emission due to the use of normal cement by substituting it with non cement porous concrete to which alkali-activator and blast-furnace slag powder are impregnated. As experimental variables, 5 %, 6 %, 7 %, 8 %, 9 % and 10 % of alkali-activator were substituted as binders and applied. Testing evaluated in this study were pH value, void ratio, compressive strength and residual compressive strength shown after being immersed in $H_2SO_4$ solution and $Na_2SO_4$ solution. The test results were compared with those tested with the use of porous concrete to which 400 $kg/m^3$ of unit cement amount was applied as binder. In consequence, it was concluded that; as for pH value, it was decreased than was the case in which cement was used, but increased with the more the use of alkali activator; as for void ratio and compressive strength, the mix proportion in which 9 % and 10 % of alkali activator were applied in terms of substitution ratio showed the result similar to the mixture in which 400 $kg/m^3$ of unit cement ratio was applied; and, as for residual compressive strength in the case of being immersed in $H_2SO_4$ solution and $Na_2SO_4$ solution, the compressive strength was increased, thus leading to improved chemical resistance.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.3
• /
• pp.157-163
• /
• 1995

The objective of this study is to obtain the basic data for investigating the effects of organic reserves on winter survial or regrowth yield. Dry matter, nitrogen and non-structural carbohydrate content of plants grown under $5^{\circ}C$ or $20^{\circ}C$ of culture temperature during 25 days were investigated. The dry matter content of leaves and roots were significantly reduced under $5^{\circ}C$ compared with $20^{\circ}C$culture condition. Comparing with the dry matter per plant under $20^{\circ}C$, those in leaves and roots under $5^{\circ}C$ decreased to 25% and 10%, respectively, after 25 days of temperature treatment. Total nitrogen content in leaves under $20^{\circ}C$ and $5^{\circ}C$ increased to 68% and 39% compared to the initial lenel(day O), respectively, during 25 days after temperature treatment, Nitrogen content in roots highly increased under 5 C while there was a little change under $20^{\circ}C$ condition. The nitrogen contents in roots under $5^{\circ}C$ and $20^{\circ}C$ were 39.0 and 30.8mgJg DM, respectively, after 25 days of temperature treatment. Total contents of soluble carbohydrate in both leaves and roots under $5^{\circ}C$ were higher than those under $20^{\circ}C$ condition. After 25 days of temperature treatment under$5^{\circ}C$ , their contents in leaves and roots were 1.4 and 2.0 times higher than those of under $20^{\circ}C$ condition. Stach atent in roots under $20^{\circ}C$ was less changed, while thatof under $5^{\circ}C$ greatly increased from 64.8 to 178.7mglg DM duling 25 days. 'Ihese results clearly showed that an accumulation of both nitrogen and non-structural carbohydrate in the plants occured under low temperature condition.e condition.

• Journal of the Korea Furniture Society
• /
• v.11 no.1
• /
• pp.31-36
• /
• 2000

Woodceramics are new porous carbon materials obtained by carbonization of wood or woody materials impregnated with thermosetting resin in a vacuum furnace. This study examined the electrical properties of woodceramics made from thinned logs of Cryptomeria japonica as a use for electric articles. The summarized results were as follows: 1. The volume resistivity of woodceramics decreased with increasing density of woodceramics made from 3 type board. And the volume resistivity of woodceramics made from non- steamed board was somewhat higher than steamed board. 2. The consumption of electric power of woodceramics decreased with increasing density of woodceramics and resin contents made from 3 type board. And the consumption of electric power of woodceramics made from non-steamed board was somewhat higher than steamed board. 3. When the woodceramics were coated by silicon, the consumption of electric power increased about 7%.

• Korean Journal of Microbiology
• /
• v.13 no.1
• /
• pp.1-23
• /
• 1975

This experiment was designed to elucidate the environmental factors in rhizosphers of bamboo forest that affect the distribution and the population size of Azotobacter, and also to estimate the annual productivities of nitrogen fixed by Azotobacter species. The results of this experiment can be summarized as follows ; The rhizosphere of bamboo forest contained high free sugars as of 3-8 times more than non-rhizosphere (Bacon, 1968), and the contents of organic matter and amino acids of that are reltively higher than this. Because of high content of potassium, average of soil pH is near at 7.0. As above-mentioned enviromental factors, the population sizes of Actinomycetes, general fungi, general bacteria and Azotobacters are larger than those of non-rhizosphere and the ofllowings are general fungi and general bacteria by turns. Azotobacter is dependent upon the antagonistic Actinomycetes. The main carbon source for Azotobacter in nitrogn flxation at the rhizosphere was glucose and minors were fructose, maltose and sucrose by turns. Annual gains of nitrogen by Azotobacters in soil of bamboo forest within 10cm from surface are estimated as of 88.94 kg/ha at site A, 60.4kg/ha at site B and 67.38kg/ha at site C, respectively.

• Journal of the Korean Society of Food Culture
• /
• v.8 no.4
• /
• pp.331-335
• /
• 1993

This study was performed to improved the quality of dried persimmon. For this, the investigation of quality factor and processing experiments were performed. The moisture contents of dried persimmons were 30 to 36% and it was the most important component of the quality. Tannin contents were 0 to 20% and non-treated persimmon had higher tannin contents than treatment of carbon dioxide and alcohol. Total sugar contents were 55 to 60% and it was composed in glucose and fructose. Processing of dried persimmon by artificial-drying seemed to be useful when it needed to shorten the drying time or it continued rainy day during sun-drying. From the result of quality evaluation, sliced dried persimmon was better than whole dried persimmon in quality, so the sliced dried persimmon was expected that it has a little marketability.