• 한국통신학회논문지
• /
• 제30권3C호
• /
• pp.59-63
• /
• 2005

본 논문에서는 Ring-헤드를 갖는 수직 자기기록 채널에 적합한 형태의 DC 성분이 억압된 일반화된 PRML(GPRML) 검출 방법을 제안하였다. 또한, 저주파수 영역의 잡음으로부터 데이터를 보호하기 위해 DC 성분이 제거된 코드의 사용을 고려하였다. 본 논문에서는 다양한 PRML 검출기에 코드율이 127/136인 DC 성분이 제거된 코드와 16/17 (=128/136)인 코드율을 갖는 DC 성분이 제거되지 않은 코드를 사용하여 SNR 성능을 분석한 결과, DC 성분이 제거되지 않은 코드에 제안한 GPRML 검출 방법을 사용한 경우, 기존의 PRML 방법을 사용할 때보다 10/sup -5/ BER에서 1dB 이상의 성능 이득을 보였고, DC 성분이 제거된 코드에 GPRML을 사용할 경우, 정규 밀도 3.3과 3.5에서 각각 1.4dB와 2.0dB의 성능 이득을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.697-698
• /
• 2008

This paper deals with finite element characteristic analysis of brushless DC motor according to magnetic property measurement methods. Magnetic property data for non-oriented (NO) electrical steel for electric motors are measured by the Epstein test which is considered as the international standards. Data from Epstein test may result in discrepancy from motor characteristic tests due to innate anisotropic property of NO electrical steel. Finite element analysis were performed for a BLDC motor by various measurement methods such as Epstein test, Ring test and single sheet test (SST), and calculated results were compared with considering anisotropic property conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.84-87
• /
• 2002

The plunger speed of solenoid actuator is affected by mass of plunger magnetic motive force. inductance, and return spring. These factors are not independent but related with each other according to design characteristics of solenoid actuator So, it is impossible to change the designed value for the purpose of increasing plunger speed. In this paper, we performed the FEM analysis for non-magnetic ring which is used for increasing attraction force and plunger speed by concentration of effective magnetic flux, and also performed simulation for dynamic characteristics of plunger. And, we proved the propriety of these by experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.962-964
• /
• 2004

The plunger speed of solenoid actuator is affected by mass of plunger, magnetic motive force, inductance, and return spring. These factors are not independent but related with each other according to design characteristics of solenoid actuator. So, it is impossible to change the designed value for the purpose of increasing plunger speed. In this study, we have analyzed the characteristics of high-speed solenoid actuator having a non-magnetic ring which plays a role to concentrate the effective magnetic flux into plunger. For more detailed analysis, we have induced characteristic equations and performed FEM analysis and simulation for dynamic characteristics of plunger, and proved the propriety of these by experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.87-90
• /
• 1989

The force acting on high Tc superconductors at 77K is measured and analyzed numerically. Both values are compared, and the difference between them is discussed. The forces, acting on a superconducting disk (thickness:1[mm], diameter:12[mm]) in an axially-symmetric magnetic field produced by a solenoid or a permanent magnet ring, are measured at 77K. The disk is an YBCO high Tc superconductor. The discrete surface current method(DSCM) is formalized for an axially-symmetric magnetic field. The forces of the superconducting disk in the magnetic field are analyzed using the DSCM, assuming that the disk is a perfect diamagnetic body. When the bottom side of the disk is separated 8[mm] from the top side of the solenoid, and the magnetic field applied on the center of the bottom side of the disk is 96[G], the measured value and the calculated value of the force are 96 and 496[mgf], respectively. The difference between them is caused by a non-perfect diamagnetism of the high Tc superconductor at 77K. It is proposed that a real force acting on high Tc superconductors at 77K can be estimated on the basis of a measured magnetic susceptibility of the high Tc superconductor at 77K and a calculated force of a perfect diamagnetic body.

• Journal of Korean Neurosurgical Society
• /
• 제37권4호
• /
• pp.296-299
• /
• 2005

We report a case of primary central nervous system(CNS) lymphoma in an organ recipient. A 33-years-old man who underwent a renal transplantation 3years previously presented with headache and vomiting. In Brain computed tomography scans and magnetic resonance images showed multiple periventricular cystic rim enhancing masses. Pathologic diagnosis by stereotactic biopsy revealed malignant non-Hodgkins B-cell lymphoma. After pathologic confirmation, methotrexate chemotherapy and whole brain radiation therapy were done. Having experienced such a case, the authors strongly recommend to add primary CNS lymphoma as one of the differential diagnoses to brain abscess, metastatic brain tumor and glioblastoma multiforme in cases of multiple ring enhancing periventricular lesions of immunocompromised patient or organ recipient.

• Journal of Magnetics
• /
• 제17권2호
• /
• pp.100-108
• /
• 2012

Flux concentrated permanent magnet transverse flux machines, FCPM-TFMs, with segmented stators require multi-turn concentric saddle coils to replace the ring coils, which are normally utilized in conventional layeredphase TFM constructions. In this paper, we investigate the influence of the shape of saddle phase windings and their parameter variations on the output torque productivity. Non-meshed coils evaluated via a finite element method (FEM) to examine the effect of the coil's location within one phase on machine performance. By using meshed coils, the analysis can be extended to inspect the distributions of magnetic field strength as well as current density in the coils. Throughout the study, the influence of design parameters on the output torque for two stator structures, i.e., a laminated and soft magnetic composite (SMC), are evaluated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.828-829
• /
• 2008

This paper proposes a new pole shaped magnetizing fixture with a non uniform air gap for sinusoidal magnetizing a ring type permanent magnet (PM) to reduce the cogging torque. To obtain more sinusoidal distributed magnetic flux density, the magnetizing fixture's pole shape is optimized by using the sequential response surface method (RSM). And the effects of each design parameter were investigated using the magnetic analysis combined a time stepping finite element method (FEM) with Preisach model. It has been shown, through numerical analysis the optimized modelgives near sinusoidal distributed air gap flux density and drastically reduced cogging torque.

• Bulletin of the Korean Chemical Society
• /
• 제25권10호
• /
• pp.1559-1563
• /
• 2004

The topoisomerase II poisoning effect of certain protoberberine alkaloids is associated with anti-cancer activity. Structure-activity relationships of protoberberine analogues substituted on the ring protons reveal that substitution at the C19 position is an important determinant of biological activity. In this study, the effects of substituent modification at the C19 position on the interaction of protoberberines with DNA are determined using UV and NMR spectroscopy. The line broadening effect on aliphatic resonances, chemical shift changes of the imino protons of HP14 upon berberine and berberrubine binding to HP14, and the rate of the exchange process between protoberberine analogs bound indicate that berberrubine binds HP14 more specifically than berberine. In addition, the free HP14 is altered by the substituent at the 19-position. UV spectra of berberrubine have shown a hypochromic effect together with a slight red shift, which are usually regarded as characteristics of DNA intercalation. These results are consistent with our previous report that the berberrubine is partially intercalated with HP14 with molar ratio 1 : 1, whereas a non-specific interaction is predominant between the berberine and HP14.

• 한국재료학회지
• /
• 제23권9호
• /
• pp.483-488
• /
• 2013

Over the past few decades, high-nitrogen austenitic steels have steadily received greater attention since they provide a unique combination of high strength and ductility, good corrosion resistance, and non-magnetic properties. Recently, highnitrogen 18Mn-18Cr austenitic steels with enhanced strength have been developed and widely used for generator retaining rings in order to prevent the copper wiring from being displaced by the centrifugal forces occurring during high-speed rotation. The high-nitrogen austenitic steels for generator retaining ring should be expanded at room temperature and then stress relief annealed at around $400^{\circ}C$ to achieve the required mechanical properties. In this study, four kinds of high-nitrogen 18Mn-18Cr austenitic steels with different nitrogen content were fabricated by using a pressurized vacuum induction melting furnace, and then the effects of nitrogen content, cold working, and stress relieving on tensile properties were investigated. The yield and tensile strengths increased proportionally with increasing nitrogen content and cold working, and they further increased after stress relieving treatment. Based on these results, a semi-empirical equation was proposed to predict the tensile strength of highnitrogen 18Mn-18Cr austenitic steels for generator retaining rings. It will be a useful for the effective fabrication of high-nitrogen 18Mn-18Cr austenitic steels for generator retaining rings with the required tensile properties.