• Journal of KSNVE
• /
• v.11 no.1
• /
• pp.111-117
• /
• 2001

Present work deals with a study on the deployment or retraction of cantilever beam that includes the rigid-body motion of large displacement of beam through the translational and rotational motions in 2-dimensional plane. The equations of motion are derived with respect to non-Cartesian coordinate system. In the formulation of equations of motion, shear deformations and geometrically non-linear effect are included. An assumed mode method is applied and numerical convergence characteristics are studied also. Types of motion of the moving beam are assumed to be classified as‘slow’or‘fast’motion, and the dynamic characteristics are investigated.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.1
• /
• pp.54-64
• /
• 1997

In this paper, a method of dynamic modeling and a dynamic control of a mobile robot are presented to show the superiority of the dynamic control comparing to the PD control. This dynamic model is derived from the cartesian coordinates using lagrange equations. Based upon the derived dynamic model, we implemented the dynamic control of the mobile robot using the computed torque method. Time varying non-linear friction terms are not incroporated in this dynamic model. Instead, those are considered as disturbances. This uncertainty in dynamic model of mobile robot is compensated by the outer loop controller using PD algorithm. The validity of this model and the control algorithm are confirmed through the experiments, where the dynamic control algorithm demonstrated robust velocity tracking performance against the unmodeled non-linear frictions. The superiority of this algorithm is demonstrated by comparing to classical PD control algorithm.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.10a
• /
• pp.200-208
• /
• 2007

A methodology for the simulation of compressible high Reynolds number flow over rigid and moving bodies on a structured Cartesian grid is described in this paper. The approach is based on a modified version of the Brinkman Penalization method. To avoid oscillations in the vicinity of the body and to simulate shcok-containing flows, a Weighted Essentially Non-Oscillatory scheme is used to discretize the spatial flux derivatives. For high Reynolds number viscous flow, two turbulence models of the two-equation Menter's SST URANS model and a two-equation Detached Eddy Simulation are implemented. Some simple flow examples are given to assess the accuracy of the technique. Finally, a moving grid capability is demonstrated.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.6
• /
• pp.1014-1019
• /
• 2003

A dynamic modeling method for beams undergoing overall rigid body motion is presented in this paper. Two special deformation variables are introduced to represent the stretching and the curvature and are approximated by the assumed mode method. Geometric constraint equations that relate the two special deformation variables and the cartesian deformation variables are incorporated into the modeling method. By using the special deformation variables, all natural as well as geometric boundary conditions can be satisfied. It is shown that the geometric nonlinear effects of stretching and curvature play important roles to accurately predict the dynamic response when overall rigid body motion is involved.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.7
• /
• pp.671-678
• /
• 2006

This article proposes a smooth path generation and time scheduling method for general tasks defined by non-smooth path segments in industrial robotic applications. This method utilizes a simple 3rd order polynomial function for smooth interpolation between non-smooth path segments, so that entire task can effectively maintain constant line speed of operation. A predictor-corrector type numerical mapping technique, which correlates time based speed profile to the smoothed path in Cartesian space, is also provided. Finally simulation results show the feasibility of the proposed algorithm.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.259-266
• /
• 1996

This paper presents a geometrically non-linear formulation for the general curved beam element based on assumed strain fields and Timoshenko's beam theory. This general curved beam element is formulated from constant strain fields. And this element, designed in a local curvilinear coordinate system, is transformed into a global cartesian system in order to analyze effectively the general curved beam structures located arbitrarly in space. Numerical examples are presented to show the accuracy and efficiency of the present formulation. The results obtained from the present formulation are compared with those available in the literature and analysis by ANSYS.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.3 no.3
• /
• pp.186-196
• /
• 1991

Numerical analysis has been performed to investigate the effects of the turbulence intensity and Prandtl number on the local heat transfer around a circular cylinder in crossflow. The governing equations were reformulated in a non-orthogonal coordinate system with Cartesian velocity components and discretised by the finite volume method with a non-staggered variable arrangement. For laminar flow, the calculations were performed for the Reynolds numbers 26 and 200. The results showed good agreement with the experimental results. For turbulent flow of the Reynolds number $1{\times}10^5$ and $2{\times}10^6$, the results showed that with an increase in the turbulent intensity in the main stream, the local Nusselt number increases in the front region of the circular cylinder. But the effect of turbulent intensity on the local Nusselt number diminishes in the wake region. The influence of Prandtl numbers show similar trend to that of turbulent intensity.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.3 s.120
• /
• pp.220-225
• /
• 2007

Free vibration analysis using the method of NDIF (non-dimensional dynamic influence function), which was developed by the author, is extended to arbitrarily shaped polygonal plates with free edges. Local Cartesian coordinate systems are employed to apply the free boundary condition to nodes distributed along the edges of the plate of interest. Furthermore, a new way for applying the free boundary condition to nodes located at corners of the plate is for the first time introduced by considering the phenomenon of stress concentration at the corners. Two case studies show that the proposed method is valid and accurate when the eigenvalues by the proposed method are compared to those by FEM(ANSYS).

• Journal of Korean Philosophical Society
• /
• v.147
• /
• pp.239-260
• /
• 2018

Is an artificial intelligence robot, a non-human beings newly emerging in the age of technology, a threat to human beings, or a mutual cooperation or ensemble with human beings? The desire to control nature through the use of the power of science and technology is manifested in the fear that humans can annihilate themselves. This study attempts to identify the problems of Cartesian epistemology underlying these questions and fears and to answer these questions based on Merleau - Ponty 's ontological ontology using the Ontology and Latour' s ontology and technological philosophy. The cogito derived from the Cartesian philosophy became the basis of the structure of dichotomous epistemology of 'subjectivity and objectivity' based on human - reason. In the human-centered world, all non-human beings were tools or controls for humans. The problem of the modern people is not only to get help from the natural scientific methods to control the nature including man, but also to think that scientific method is the only way to understand the world. In criticizing this, Merleau-Ponty shows that the body mediates between human beings and non-human beings, and provides a possible ontological basis for the ontology. Merleau - Ponty 's phenomenological methodology and ontology are newly developed by Simondon under the influence of phenomenological philosopher and phenomenology. The relationship between human beings and nonhuman beings by Simondon appears as an ensemble of human and technical objects or a mutual co - operation of human and technical objects. In particular, Latour goes a step further in Simondon and defines all the bodies living in the world as actor-network theory, denying the core concept of modernity. Merleau - Ponty 's phenomenological view can be a new possible basis for the philosophical discussion of the technological age. We will see that the problem itself can be solved by shifting modern fear to a phenomenological attitude.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.8
• /
• pp.2681-2692
• /
• 1996

The finite-volume method for radiation in a three-dimensional non-orthogonal gas turbine combustion chamber with absorbing, emitting and anisotropically scattering medium is presented. The governing radiative transfer equation and its discretization equation using the step scheme are examined, while geometric relations which transform the Cartesian coordinate to a general body-fitted coordinate are provided to close the finite-volume formulation. The scattering phase function is modeled by a Legendre polynomial series. After a benchmark solution for three-dimensional rectangular combustor is obtained to validate the present formulation, a problem in three-dimensional non-orthogonal gas turbine combustor is investigated by changing such parameters as scattering albedo, scattering phase function and optical thickness. Heat flux in case of isotropic scattering is the same as that of non-scattering with specified heat generation in the medium. Forward scattering is found to produce higher radiative heat flux at hot and cold wall than backward scattering and optical thickness is also shown to play an important role in the problem. Results show that finite-volume method for radiation works well in orthogonal and non-orthogonal systems.