• 대한토목학회논문집
• /
• 제8권1호
• /
• pp.77-85
• /
• 1988

본 연구(硏究)에서는 지진(地震)하중을 받는 선형비례감쇠(線形比例減衰) 시스템의 층응답(層應答) 스펙트럼을 random vibration 이론(理論)을 적용하여 계산(計算)하는 방법을 제시(提示)하였다. 해석(解析)방법으로는 모드가속도법(加速度法)을 사용하였으며 구조물(構造物)-기기(機器)의 상호작용(相互作用)은 고려하지 않았다. 입력지진운동(入力地震運動)과 기기(機器)의 응답(應答)을 평균(平均)값이 영(零)인 정상(定常) Gauss 과정(過程)으로 가정하였다. 입력지진(入力地震)의 천이특성을 Vanmarcke 방법(方法)에 따라 첨두계수(尖頭係數) 계산시 고려하였다. 층응답(層應答) 스펙트럼을 공진(共振)과 비공진(非共振)으로 구분(區分)하여 계산하였으며 응답(應答)계산시 구조물(構造物)과 진동체(振動體)의 첨두계수(尖頭係數)는 지반응답(地盤應答) 스펙트럼의 첨두계수(尖頭係數)와 동일(同一)하다고 가정하였다. 적용예(適用例)에서는 시간이력해석(時間履歷解析)의 결과와 비교(比較)함으로써 본 연구(硏究)의 타당성(妥當性)을 입증(立證)하였다. 본(本) 논문(論文)의 해석방법(解析方法)을 사용(使用)하면 비교적(比較的) 정확(正確)한 안전측(安全側)의 결과(結果)를 얻을 수 있으며 시간이력해석법(時間履歷解析法)에 비해 계산시간(計算時間)을 상당(相當)히 절약할 수 있다.

• 한국항공운항학회지
• /
• 제18권1호
• /
• pp.58-63
• /
• 2010

Introduction : Head trauma is the main cause of death in aircraft crash. In a Michigan study of structurally survivable, fatal accidents, 80% of the fatally injured had received head trauma. We tried to develop a new helmet for passengers, and perform its efficiency test. Methods : An aircraft helmet requires an excellent protection against head trauma, lightness, and small volumes. In addition, it must be wearable, fire resistant, and non toxic when it is burning. We developed two new helmets made from silicone foam which met all theses requirements. One was thin (2.5cm), and the other was thick (6.3cm). These looked like a motorcycle helmet and had only a soft silicone as liner material without an outer hard shell. Therefore we can carry them easily inside aircrafts. The standard test for helmet is Snell's drop test. It measures the impact acceleration of head shaped metal wearing helmet during we drop it at certain heights. Impact sites were total 5 sites (front, back, right, left and top) for each helmet. All these sites were impacted twice. Results : The thickness of impact sites varied from 2.5cm to 6.3cm. The impact acceleration of 2.5cm thickness site when it was dropped from 1.0 meter was 379g. But, that of 6.3cm thickness site when it was dropped from 1.5 meter was only 163g. Unfortunately, both helmets didn't meet the Snell Standard for motorcycle helmets. Discussion : If we add suitable outer hard shell, and change its thickness and design, the efficiency will be increased. A study indicated that helmet could reduce the risk of head trauma up to 85%. We made helmet for passengers in aircraft crash for the first time. If we improve its weak points, it will decrease the frequency of head trauma in aircraft craft.

• 산경연구논집
• /
• 제9권2호
• /
• pp.47-55
• /
• 2018

Purpose - To meet the needs of various customers in an uncertain market environment, many companies use product modularization strategies. Modularization of a product means that one product consists of several components and that the type of product can be changed according to the combination of components. The greatest feature of modularity is that changes in one component do not significantly affect the physical changes in the other component to which they are connected. Modularization of products is recognized as a very important strategy to reflect increasingly complicated customer requirements to products and respond to the needs of various markets. Many studies have been made in connection with the concept of mass customer satisfaction. There are many prior studies that modularization of such products positively affects the operational performance (manufacturing cost, fast delivery, etc.) and innovation of the product. However, excessive modularization has been found to have a negative effect on this performance. However, there are very few studies on the nonlinear relationship between product modularization and customer satisfaction. Supplementing these academically insufficient parts is very necessary when considering the current market environment. Research design, data, and methodology - In order to make up for the shortcomings of academic research in Korea, this study collects data through questionnaires in electronic, auto, and defense industry. This is because these industries are using modularity of products. based on lots of previous studies and information overload theory, we made two hypothesis and verify with empirical analysis. All 108 data were used. We used the R program and SPSS program for statistical verification. Results - As a result of the study, modularization of products showed positive relationship with customer satisfaction to a certain level. However, it has been found that when the modularization is over and beyond a certain level, there is a negative relationship with customer satisfaction. Conclusions - Excessive modularization of products can have a negative impact on customer satisfaction. This result can be understood as a result of human limited rationality due to information overload. Therefore, it is important for companies to apply appropriate modularity to product design.

• 대한치과교정학회지
• /
• 제45권4호
• /
• pp.164-170
• /
• 2015

Objective: The aim of this study was to compare the shear bond strength (SBS) of orthodontic brackets bonded to zirconia surfaces using three different zirconia primers and one silane primer, and subjected to thermocycling. Methods: We designed 10 experimental groups following the surface treatment and thermocycling. The surface was treated with one of the following method: no-primer (NP), Porcelain Conditioner (PC), Z-PRIME Plus (ZP), Monobond Plus (MP) and Zirconia Liner Premium (ZL) (n=20). Then each group was subdivided to non-thermocycled and thermocycled groups (NPT, PC, ZPT, MPT, ZLT) (n=10). Orthodontic brackets were bonded to the specimens using $Transbond^{TM}$ XT Paste and light cured for 15 s at $1,100mW/cm^2$. The SBS was measured at a 1 mm/min crosshead speed. The failure mode was assessed by examination with a stereomicroscope and the amount of bonding resin remaining on the zirconia surface was scored using the modified adhesive remnant index (ARI). Results: The SBS of all experimental groups decreased after thermocycling. Before thermocycling, the SBS was ZL, $ZP{\geq}MP{\geq}PC>NP$ but after thermocycling, the SBS was $ZLT{\geq}MPT{\geq}ZPT>PCT=NPT$ (p > 0.05). For the ARI score, both of the groups lacking primer (NP and NPT) displayed adhesive failure modes, but the groups with zirconia primers (ZP, ZPT, MP, MPT, ZL, and ZLT) were associated with mixed failure modes. Conclusions: Surface treatment with a zirconia primer increases the SBS relative to no-primer or silane primer application between orthodontic brackets and zirconia prostheses.

• The Journal of Advanced Prosthodontics
• /
• 제6권2호
• /
• pp.115-120
• /
• 2014

PURPOSE. The aim of this in vitro study was to evaluate the effect of aging on the tear strength and cytotoxicity of four soft denture lining materials. MATERIALS AND METHODS. Four commonly used soft denture lining materials, (Coe-Comfort$^{TM}$ GC America Inc., Alsip, IL, USA; Coe-SOFT$^{TM}$ GC America Inc., Alsip, IL, USA; Visco-gel Dentsply Caulk Milford, DE, USA; and Sofreliner Tough M Tokuyama Dental Corporation Tokyo, Japan) were selected. Sixty trouser-leg designed specimens per lining material were fabricated using a stainless steel mold for tear strength testing. The specimens were divided into non-thermocycling and 1000-, and 3000-thermocycling groups. For the cytotoxicity test, twenty-four disk shaped specimens per material were fabricated using a stainless steel mold. The specimens were soaked in normal saline solution for 24 h, 48 h and 72 h. Cytotoxicity was measured by XTT assay in L929 mouse fibroblasts. Data were analyzed by two way analysis of variance and Dunnett's test (P<.05). RESULTS. Before thermocycling, Sofreliner Tough M ($10.36{\pm}1.00N$) had the highest tear strength value while Coe-Comfort$^{TM}$ ($0.46{\pm}0.10N$) had the lowest. After 3000 cycles, Sofreliner Tough M ($9.65{\pm}1.66N$) presented the highest value and Coe-Comfort$^{TM}$ ($0.42{\pm}0.08N$) the lowest. Sofreliner Tough M, in all incubation periods was the least toxic with significant differences compared to all other materials (P<.05). Coe-Comfort$^{TM}$, Coe-$SOFT^{TM}$, and Sofreliner Tough M did not show any significant differences within their material group for all incubation periods. CONCLUSION. This in vitro study revealed that aging can affect both the tear strength and cytotoxicity of soft denture materials depending on the composition.

• 한국결정성장학회지
• /
• 제14권1호
• /
• pp.12-16
• /
• 2004

본 실험은 대형의 고품질 DAST 결정을 위한 결정안정성과 재현성의 향상에 관하여 연구하였다. DAST 결정은 냉각법에 의한 메탄을 포화용액에서 성장시켰으며, 4-methyl-n-methyl pyridinum tosylate의 축합상태로 합성하였다. DAST 분말은 piperidine이 존재한 상태에서 r-picoline. methyl p-tolune sulfonate 그리고 P-dimethylaminobenzaldehyde로부터 제조하였다. 이때 DAST $H_2O$의 생성을 피하기 위하여 dry Argon분위기에서 합성하였다. 이것은 DAST분자가 습한 분위기에서 결정화될 경우 결정구조는 중심 대칭이 되고 그러한 경우에 DAST 미세결정이 습기를 함유하면 2차 비선형 광학특성은 사라지기 때문이다. 우리는 성장방향을 (001)면으로 고정시켰다. 성장조건은 $H_2O$/day로 서냉시켰으며 기간은 4일 동안이었다. seed 결정의 크기는 $2.5\times 3.6\times0.4\textrm{mm}^3$이며 $10\times 10.5\times3.0\textrm{mm}^3$의 DAST 결정을 제조했다. 육성된 DAST는 빨간색이며 메탈릭그린처림 보이는 표면특성을 나타내였다.

• 한국산학기술학회논문지
• /
• 제6권2호
• /
• pp.165-171
• /
• 2005

초음파 모터는 전자기식 모터들과는 달리 다양한 특징과 뛰어난 성능을 가진 새로운 형태의 모터이다. 그러나, 초음파 모터는 특히 구동시간에 따라 시스템의 비선형적인 특성과 파라미터의 변화들에 대한 문제를 갖는다. 그러므로 기존의 PID제어기를 사용함으로써 만족스러운 제어기의 성능을 내기가 어렵다. 본 논문에서는 원환형 초음파 모터와 선형 초음파 모터의 정밀 제어를 하기 위해 구동시간에 따른 응답 시간과 변화 등의 특성을 각각 분석하고, 리니어 초음파 모터에 대해서는 ${\mu}m$정도의 오차를 갖는 스텝 제어기와 PD제어기를 결합한 제어기를 제안한다. 제안된 제어기의 성능은 제어를 하지 않고 구동 시에 측정된 슬립 오차와 제안된 제어기를 사용하여 구동 시 측정된 슬립 오차를 비교하여 평가하였다. 실험 결과 스텝 제어기를 사용한 리니어 초음파 모터의 슬립오차는 $10{\mu}m$이하로 우수한 성능을 입증하였다.

• 한국자원식물학회지
• /
• 제29권3호
• /
• pp.339-346
• /
• 2016

This study was carried out to develop an effective seed propagation method for Thalictrum rochebrunianum var. grandisepalum (H. Lev.) Nakai by analyzing seed dormancy types and germination characteristics. Seeds were collected between September to October at Gangwon province, and well-selected seeds were used while being dry-stored at 4±1℃. The seed size ranged 4.52 × 1.58 ㎜ and the weight of thousand seeds were 1,603.5 ± 0.02 ㎎. The moisture content was 7.2%. Seeds were achene type, and morphology characters showed an elliptical shape and rough texture, and light brown in color. Moist-chilling treatment was conducted for dormancy breaking because the seeds had an undeveloped embryo of liner type. The embryo had developed during a moist-chilling period, constantly, and fully developed in 10 weeks. Consequently, it seemed to be non-deep complex or intermediate complex type of morphophysiological dormancy, and embryo dormancy was broken by wet-chilling for 10 weeks. After 10 weeks of wet-chilling treatment, seed germination began. Germination percentage was higher in dark condition raher than light condition and recorded the maximum at 25℃ in the dark (16.3%). A pre-soaking treatment with a combined plant growth hormones promoted germination and shortened T₅₀. Specifically, seed germination of 84.5% was achieved by pre-soaking of seeds with a combined solution of 500 ㎎/L GA₃ and 10 ㎎/L kinetin for 24 h after a wet-chilling treatment for 10 weeks. Thus the effect of plant growth hormones coupled with chilling temperature on seed breaking dormancy provide asubsequent growth of seedlings for successful plantation.

• The Journal of the Acoustical Society of Korea
• /
• 제26권1E호
• /
• pp.33-38
• /
• 2007

Compressional wave velocity and shear wave velocity were measured for gassy sediments collected from Jinhae Bay, Korea. To distinguish inhomogeneities of gassy sediments, Computed Tomography (CT) was carried out for gassy sediment using CT Scanner. The cored sediments are composed of homogeneous and soft mud (greater than $8{\Phi}$ in mean grain size) containing clay content more than 50%. In depth interval of gassy sediments, compressional wave velocity is significantly decreased from 1480m/s to 1360m/s, indicating that the gas greatly affects compressional wave velocity due to a gas and/or degassing cracks. Shear wave velocity shows a slight increasing pattern from ${\sim}55\;m/s$ in the upper part of the core to ${\sim}58\;m/s$ at 320 cm depth, and then decreases to ${\sim}54\;m/s$ in the lower part of the core containing a small amount of gas. But shear wave velocity in the gassy sediments is slightly greater than that of non-gassy sediments in the upper part of the core. Thus, the Vp/Vs ratio is decreased (from 30 to 25) in gas charged zone. The Vp/Vs ratio is well correlated with shear wave velocity, but no correlation with compressional wave velocity. This suggests that low concentrations of gas have little affects on shear wave velocity. By CT images, the gas in the sediments is mostly concentrated around inner edge of core liner due to a long duration after sediment collection.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 추계학술대회
• /
• pp.337-346
• /
• 1996

Debonding of cement-femoral stem interface has been suggested as a initial focus of loosening mechanism in many previous studies of cemented total hip replacement. The purpose of this study was to investigate the effect of debonding of cement-femoral stem interface to the bone-cement interface by using three-dimensional non-liner finite element analysis. Three cases of partial debonded, full debonded, full bonded cement-bone interface were modelled with partial bonding of distal 70mm from the tip of femoral stem. Each situation was studied under loading stimulating one-leg stanced gait of 68kg patient. The results showed that under partial and full debonded cement-stem interface condition the peak von Mises stress(3.1 MPa) were observed at the cement of bone-cement interface just under the calcar of proximal medial of femur, and sudden high peak stresses(3.5MPa) were developed at the distal tip of femoral stem at the lateral bone-cement interface in all 3 cases of bonding. The stresses were transfered very little to the cement of upper lateral bone-cement interface in partial and full debonded cases. Thus, once partial or full debonded cement-femoral stem interface occured, 3 times higher stress concentration were developed on the cement of proximal medial bone-cement interface than full bonded interface, and these could cause loosening of cemented total hip replacement. Clinically, preservation of more rigid cement-femoral stem interface may be important factor to prevent loosening of femoral stem.