• Bulletin of the Korean Mathematical Society
• /
• v.44 no.1
• /
• pp.173-176
• /
• 2007

The non-existence is proved of four-dimensional mod 2 semisimple representations of Gal ($\=\mathbb{Q}/\mathbb{Q}$) which are unramified outside 2.

• Proceedings of the PSK Conference
• /
• 2000.04a
• /
• pp.173.1-173.1
• /
• 2000

• Smart Structures and Systems
• /
• v.30 no.2
• /
• pp.173-181
• /
• 2022

The current paper presents a technique to detect crack in non-uniform cantilever-type pipe beams, that have step changes in the properties of their cross sections, restrained by a translational and rotational spring with a tip mass at the free end. An equation for estimating the natural frequencies for the non-uniform beams is derived using the boundary and continuity conditions, and an equivalent bending stiffness for cracked beam is applied to calculate the natural frequencies of the cracked beam. An experimental study for a step-changed non-uniform cantilever-type pipe beam restrained by bolts with a tip mass is carried out to verify the proposed method. The translational and rotational spring constants are updated using the neural network technique to the results of the experiment for intact case in order to establish a baseline model for the subsequent crack detection. Then, several numerical simulations for the specimen are carried out using the derived equation for estimating the natural frequencies of the cracked beam to construct a set of training patterns of a neural network. The crack locations and sizes are identified using the trained neural network for the 5 damage cases. It is found that the crack locations and sizes are reasonably well estimated from a practical point of view. And it is considered that the usefulness of the proposed method for structural health monitoring of the step-changed non-uniform cantilever-type pipe beam-like structures elastically restrained in the ground and have a tip mass at the free end could be verified.

• Journal of Korean Biological Nursing Science
• /
• v.15 no.4
• /
• pp.173-183
• /
• 2013

Purpose: The purpose of this study was to compare the stress level and HPA axis activity of an internet game addiction group and non-addiction group in adolescents. Methods: A cross-sectional comparative study was performed with 140 male high school students from 9 vocational high schools at W city. Data were collected from July to September, 2012, using a questionnaire for measuring internet game addiction and stress level, blood samples for serum ACTH, and cortisol level for HPA axis activity. Data were analyzed using descriptive analysis, $X^2$-test, t-test, ANOVA, and Pearson correlation coefficient with SPSS/WIN 15.0. Results: The stress level of the internet game addicted group was significantly higher than that of the non-addicted group (p<.001). The serum cortisol level was also significantly higher in the internet game addicted group than in the non-addicted group (p<.026). The serum ACTH level was higher in the internet game addicted group more than in the non-addicted group (p<.072). Conclusion: These results showed that internet game addiction could increase stress level and HPA axis activity in high school adolescents. Thus, a nursing approach to prevent and relieve internet game addiction should be initiated to stabilize the HPA axis of internet game addicted adolescents.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 1998.11a
• /
• pp.159-173
• /
• 1998

Quality characteristics on the properties of process capability indices (PCIs) are often required to be normally distributed. But, if a characteristic is not normally distributed, serious errors can result from normal-based techniques. In this case, we may well consider the use of new PCIs specially designed to be robust for non-normality. In this paper, a newly proposed measure of process capability is introduced and compared with existing PCIs using the simulated non-normal data.

• The Journal of Natural Sciences
• /
• v.14 no.1
• /
• pp.25-37
• /
• 2004

T7 RNA polymerase also recognize intrinsic, hairpin-independent termination signal, a conserved 7-base pair sequence (ATCTGTT in the non-template stand) and U-rich sequence downstream of it. These intrinsic, hairpin-independent termination signal were commonly found in PTH and CJ termination sequences. There are two types of mutant T7 RNA polymerases recognizing sensitively(X3, X19, BG8) of insensitively (R173C) the intrinsic termination signals. We determined the T7 transcription activities of these mutants. Compared to wild-type, mutants X4, 19 and BG8 show highly reduced transcription activities (8%, 33%, 34%). On the other hand mutant R173C shows comparable transcription activity of wild-type (112%). Also transcription termination efficiencies at the PTH or CJ termination signals were determined by using mutant RNA polymerases. Temination of mutnats X4, X19 and BG8 are increased compared to wild-type. On the other hadn mutant R173C proceeds through PTH and CJ termination signals.

• The Korean Journal of Applied Statistics
• /
• v.6 no.1
• /
• pp.173-181
• /
• 1993

Nonparametric empirical Bayes estimation of a distribution function with respect to dirichlet process prior is considered when sample sizes are varying from component to component. Zehnwirth's estimate of $\alpha$(R) is modified to be used in our empirical Bayes problem with non-identical components.

• Applied Microscopy
• /
• v.43 no.4
• /
• pp.173-176
• /
• 2013

The oxidation behavior of the crystallized $Al_{87}Ni_3Y_{10}$ alloy has been investigated with an aim to compare with that of the amorphous $Al_{87}Ni_3Y_{10}$ alloy. The oxidation at 873 K occurs as follows: (1) growth of an amorphous aluminum-yttrium oxide layer (~10 nm) after heating up to 873 K; and (2) formation of $YAlO_3$ crystalline oxide (~220 nm) after annealing for 30 hours at 873 K. Such an overall oxidation step indicates that the oxidation behavior in the crystallized $Al_{87}Ni_3Y_{10}$ alloy occurs in the same way as in the amorphous $Al_{87}Ni_3Y_{10}$ alloy. The simultaneous presence of aluminum and yttrium in the oxide layer significantly enhances the thermal stability of the amorphous structure in the oxide phase. Since the structure of aluminum-yttrium oxide is dense due to the large difference in ionic radius between aluminum and yttrium ions, the diffusion of oxygen ion through the amorphous oxide layer is limited thus stabilizing the amorphous structure of the oxide phase.

• Interaction and multiscale mechanics
• /
• v.3 no.2
• /
• pp.173-191
• /
• 2010

Damage detection plays a very important role to the maintenance of bridge structures. Traditional damage detection methods are usually based on structural dynamic properties, which are acquired from pre-installed sensors on the bridge. This is not only time-consuming and costly, but also suffers from poor sensitivity to damage if only natural frequencies and mode shapes are concerned in a noisy environment. Recently, the idea of using the dynamic responses of a passing vehicle shows a convenient and economical way for damage detection of bridge structures. Inspired by this new idea and the well-established tap test in the field of non-destructive testing, this paper proposes a new method for obtaining the damage information through the acceleration of a passing vehicle enhanced by a tapping device. Since no finger-print is required of the intact structure, this method can be easily implemented in practice. The logistics of this method is illustrated by a vehicle-bridge interaction model, along with the sensitivity analysis presented in detail. The validity of the method is proved by some numerical examples, and remarks are given concerning the potential implementation of the method as well as the directions for future research.

• Steel and Composite Structures
• /
• v.31 no.2
• /
• pp.173-185
• /
• 2019

This paper presents experimental and numerical investigations of aluminum tubular members subjected to combined bending and web crippling. A series of tests was performed on square hollow sections (SHS) fabricated by extrusion using 6061-T6 heat-treated aluminum alloy. Different specimen lengths were tested to obtain the interaction relationship between moment and concentrated load. The non-linear finite element models were developed and verified against the experimental results obtained in this study and test data from existing literature for aluminum tubular sections subjected to pure bending, pure web crippling, and combined bending and web crippling. Geometric and material non-linearities were included in the finite element models. The finite element models closely predicted the strengths and failure modes of the tested specimens. Hence, the models were used for an extensive parametric study of cross-section geometries, and the web slenderness values ranged from 6.0 to 86.2. The combined bending and web crippling test results and strengths predicted from the finite element analysis were compared with the design strengths obtained using the current American Specification, Australian/New Zealand Standard and European Code for aluminum structures. The findings suggest that the current specifications are either quite conservative or unconservative for aluminum square hollow sections subjected to combined bending and web crippling. Hence, a bending and web crippling interaction equation for aluminum square hollow section specimens is proposed in this paper.