• 한국소음진동공학회논문집
• /
• 제18권3호
• /
• pp.335-344
• /
• 2008

In recent years, public complaints against railroad noise by KTX and Ordinary train have been rising. Regulation of railways noise uses same standard without distinguishing the type of railroad cars. According to the type of railroad cars, the frequency characteristics of emitting noise is different. Therefore it is requested to know how the public response vary to each types of railroad cars. The noise annoyance from three types of trains(KTX, electric train, diesel train) was analyzed by jury evaluation test for assessing the effect of frequency characteristics. The numerical results by a semantic differential method showed that annoyance response to three type of trains depended on the frequency characteristics. As a result, this study proposed that the KTX could have a bonus level of maximum 2.9 dB(A) compared to ordinary train.

• 전자공학회논문지
• /
• 제49권12호
• /
• pp.277-284
• /
• 2012

본 논문은 EMI(Electro Magnetic Interference) 잡음의 주된 원인인 각 회로의 임피던스 부정합, 고속 데이터 인터페이스 그리고 PCB(Printed Circuit Board) 상에서 전원/접지 구조에 의한 불안정 잡음을 주파수 대역별로 분석하여 각 원인별 잡음 개선 방안을 제시하였다. 또한 이를 통해 무선 비디오 데이터를 전송하는데 사용되는 차량용 무선 비디오 스트림 시스템 설계방안을 제안하였다. 잡음 개선 방안으로 회로 신호의 임피던스 정합과 PCB 라인의 내층 설계, 전원/접지 구조 개선을 통해 시스템의 잡음 개선을 수행하였다. 구현된 시스템은 EMI 규제에 따라 각 대역에서 40[dBuV/m]와 47[dBuV/m]내로 잡음 개선을 하였다.

• 소음진동
• /
• 제9권1호
• /
• pp.184-188
• /
• 1999

Noise regulation of heavy construction machinery is getting stricter： 3 dB per every 4 year in European community. To meet this requirement many engineers have adopted the enclosing structures with thick absorbing materials and small opening, This increases internal temperature of the enclosure which have engine systems such as electric equipment that are vulnerable to heat, and engine block and muffler that can be regarded as heat sources. So noise control engineers have to consider a coupling problem: combining heat balance and noise reduction. This paper describes this approach by introducing simple heat transfer theory and SEA. The enclosing system of the loader whose enclosing structure consists of two rooms is investigated to show the validity of this method. The results represent that the simple heat transfer theory can be useful to estimate cooling performance when it is linked together by the back pressure theory in duct system. and the radiated noise can also be estimated by the SEA. Therefore a designer can use these approaches to define the opening ratio of an enclosure and the mass flow rate of air considering radiating noise.

• 교육시설 논문지
• /
• 제18권4호
• /
• pp.3-12
• /
• 2011

This study investigates interior and exterior environments and arrangement forms of school buildings from elementary to high school which were recently built in Daegu since the 7th Educational Curriculum. In addition, this study analyses how outside noise affects inside environment of schools. This study found that the noise level criteria of school facilities(such as exterior learning sites and outer walls of school buildings) adjacent to street of one side satisfiedly corresponded to the level and criteria, 65dB(A), of school health law. However, the noise level and vibration criteria of school facilities adjacent to street of two sides did not satisfiedly corresponded to the level or criteria, 65dB(A). In case of classrooms, the inner noise of educational facilities with windows closed and also close to both the street of one side and of two sides satisfiedly corresponded to the level or criteria. 55dB(A), of school health law. In spring and tall, the windows are more open them usual for ventilation, and leaving windows open can lead to noise from outside. Thus, it is urgent to prepare for this situation.

• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.455-462
• /
• 2020

Noise which is unwanted sound is a serious pollutant that can affect human health, as well as the working and living environment if exposed to humans. However, current noise management on the construction project is generally conducted after the noise exceeds the regulation standard, which increases the conflicts with inhabitants near the construction site and threats to the safety and productivity of construction workers. To overcome the limitations of the current noise management methods, the activities of construction equipment which is the main source of construction noise need to be managed throughout the construction period in real-time. Therefore, this paper proposed a framework for automatically detecting noise sources in construction sites in real-time based on convolutional neural networks (CNNs) according to the following four steps: (i) Step 1: Definition of the noise sources; (ii) Step 2: Data preparation; (iii) Step 3: Noise source classification using the audio CNN; and (iv) Step 4: Noise source detection using the visual CNN. The short-time Fourier transform (STFT) and temporal image processing are used to contain temporal features of the audio and visual data. In addition, the AlexNet and You Only Look Once v3 (YOLOv3) algorithms have been adopted to classify and detect the noise sources in real-time. As a result, the proposed framework is expected to immediately find construction activities as current noise sources on the video of the construction site. The proposed framework could be helpful for environmental construction managers to efficiently identify and control the noise by automatically detecting the noise sources among many activities carried out by various types of construction equipment. Thereby, not only conflicts between inhabitants and construction companies caused by construction noise can be prevented, but also the noise-related health risks and productivity degradation for construction workers and inhabitants near the construction site can be minimized.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 추계학술대회
• /
• pp.630-633
• /
• 2021

전달받은 음성신호를 전기신호로 바꾸어주는 마이크로폰은 라디오, 스마트 기기, 차량 등의 다양한 산업 분야에 널리 사용되어왔다. 최근 스마트폰 기술의 발달과 무선이어폰의 소형화에 따라 초소형 고감도 마이크로폰에 대한 요구가 증가하고 있다. 차세대 초소형 마이크로폰 시스템의 후보로 MEMS 센서가 개발되고 있으며 이를 지원하는 ROIC 대한 개발 또한 활발하다. 마이크로폰 시스템은 주변의 잡음뿐만 아니라, 함께 사용되는 전자회로의 잡음에 대해서도 민감하므로, 낮은 노이즈를 갖는 전원을 공급할 수 있는 전원장치와 노이즈를 최소화할 수 있는 설계 방법들이 필요하다. 이에 본 논문은 MEMS 마이크로폰 센서 모듈에 사용 가능한 낮은 전원 노이즈를 갖는 LDO(low drop output) 레귤레이터 IC 구조를 제안한다. 제안한 회로는 2.0~3.6V를 공급받아 1.3V의 출력을 내보낼 수 있으며 라이트 로드에서 10mA까지 드라이브할 수 있다. 제안하는 LDO는 1.2mV/V의 line regulation, 0.63mV/mA의 load regulation 특성을 가지며 20Hz~20kHz까지 누적 적분 출력 잡음은 13uV 이하의 특성을 가진다. TSMC 180nm 공정으로 post layout simulation을 진행하였으며 설계한 칩의 면적은 325㎛ × 165㎛다.

• KIEAE Journal
• /
• 제10권5호
• /
• pp.109-114
• /
• 2010

There are many business in complex building, and recently noise claims have increased in those buildings. It is one of the most desirable methods reducing the noise level to establish the noise criteria considering the admittable noise level between the source and receiving room, which are to be derived from the subjective response in the real conditions. Because the degree of annoyance and loudness for the intruding noises in complex building could be changed with background noise level, it is suggested to be researched the relationship between the noise levels and subjective response. In this study, the subjective response for three different background levels in receiving business or rooms were investigated for the typical eight business noise source including aerobic music. The results can be summarized as follows. In conditions of low background noise level(40 dB(A)), there is a tendency of intentionally attention situation (listening) in a subjective test. The other hand in conditions of relatively high background noise level(50 dB(A)), there is a unconscious situation (heraing). As the degree of moderately heard or annoyed in SD rating scale means that the noise is easily recognized in neighboring shops, usually the limit of noise criteria were decided on this rating point, so it will be reasonable to be adopted the criteria rating scale as slight heard or annoyed degree (SD criteria 3).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 학술대회 논문집 전문대학교육위원
• /
• pp.154-158
• /
• 2006

The switching-mode power converter has been widely used because of its features of high efficiency and small weight and size. These features are brought by the ON-OFF operation of semiconductor switching devices. However, this switching operation causes the surge and EMI(Electromagnetic Interference) which deteriorate the reliability of the converter themselves and entire electronic systems. This problem on the surge and noise is one of the most serious difficulties in AC-to-DC converter. Random Pulse Width Modulation (RPWM) is peformed by adding a random perturbation to switching instant while output-voltage regulation of converter is performed. RPWM method for reducing conducted EMI in single switch three phase discontinuous conduction mode boost converter is presented. The more white noise is injected, the more conducted EMI is reduced. But output-voltage is not sufficiently regulated. This is the reason why carrier frequency selection topology is proposed. In the case of carrier frequency selection, output-voltage of steady state and transient state is fully regulated. A RPWM control method was proposed in order to smooth the switching noise spectrum and reduce it's level. Experimental results are verified by converter operating at 300v/1kW with $5%{\sim}30%$ white noise input. Spectrum analysis is performed on the Phase current and the CM noise voltage. The former is measured with Current Probe and the latter is achieved with LISN, which are connected to the spectrum analyzer respectively.

• 대한기계학회논문집A
• /
• 제22권2호
• /
• pp.251-257
• /
• 1998

Active mufflers have been mainly applied in the large industrial engine due to considerable expense for implementation, but a necessity of development has been increased by the tightened regulation of exhaust noise and the request of high power. In this study, the active muffler prototype for installing in an automobile is designed and constructed. The active muffler is designed so that the primary noise and the control sound are propagated as a plane wave in the outlet. Therefore, the error microphone could be placed outside the high temperature centers of the tail pipe, and the noise radiating to the outside could be reduced in the whole areas around the outlet. For evaluating the control performance of the prototype, the control experiments of band-pass filtered random signal and the modulation of sinusoidal signal which are generated from the primary noise speaker as practical exhaust sound level are implemented. And to investigate the radiation pattern from the outlet of tail pipe and the noise reduction level of points placed adjacent to the outlet, the sound level of adjacent points of thirty is measured.

• 한국음향학회지
• /
• 제21권2호
• /
• pp.142-149
• /
• 2002

산업의 발달과 더불어 철도는 주요교통수단으로 등장하였으나, 이에 반해 철도소음은 철도변에 거주하는 주민들에게 많은 민원을 야기시키고 있는 실정이다. 따라서 정부에서는 정온한 주거환경을 위하여 2000년 1월부터 철도소음에 관한 규제를 강화하고 있으나, 기초자료의 부족 및 연구의 부족으로 인하여 효율적인 차음대책에는 많은 어려움이 있는 실정이다. 따라서 본 연구에서는 지형조건의 변화에 따른 철도소음의 전달 및 감쇠 특성에 관하여 연구함으로써, 향후 철도소음에 관한 효율적인 차음대책 수립시 기초적인 자료를 제공하고자 한다.