• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.3 s.118
• /
• pp.341-350
• /
• 2007

In this paper, the derivation of protection ratio is newly proposed for the detailed planning of frequency coordination in microwave relay networks, and computed results for protection ratio of co-channel and adjacent channel are illustrated over the actual system and its frequency. It is shown that the suggested method based upon availability prediction can be expressed in terms of composite fade margin, interference-to-noise ratio(I/N), net filter discrimination, and system parameters. According to results, for 6.7 GHz, 60 km, 64-QAM, and I/N= -6 dB at BER $10^{-6}$, composite fade margin and co-channel protection ratio provide 25.5 and 50.7 dB, respectively. Also, net filter discrimination and adjacent channel protection ratio are obtained as 26.3 and 24.4 dB, respectively, at the first adjacent channel of 40 MHz. The proposed method provides some merits in computing protection ratio for microwave relay networks in view of an easy extension and practical applications considering more detailed and various system parameters.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.464-473
• /
• 2006

This paper summarises theoretical and experimental work on the feedback control of sound radiation from honeycomb panels using piezoceramic actuators. It is motivated by the problem of sound transmission in aircraft, specifically the active control of trim panels. Trim panels are generally honeycomb structures designed to meet the design requirement of low weight and high stiffness. They are resiliently-mounted to the fuselage for the passive reduction of noise transmission. Local coupling of the closely-spaced sensor and actuator was observed experimentally and modelled using a single degree of freedom system. The effect of the local coupling was to roll-off the response between the actuator and sensor at high frequencies, so that a feedback control system can have high gain margins. Unfortunately, only relatively poor global performance is then achieved because of localisation of reduction around the actuator. This localisation prompts the investigation of a multichannel active control system. Globalised reduction was predicted using a model of 12 channel direct velocity feedback control. The multichannel system, however, does not appear to yield a significant improvement in the performance because of decreased gain margin.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.5
• /
• pp.91-97
• /
• 2004

A digital over-sampling noise-shaping coder to achieve the processing accuracy for the audio signal bandwidth is designed. In order to implement an optimized design of the noise-shaping coder as a form of U (intellectual property), circuit design techniques that optimize the multiplication and the ROM architectures are proposed with emphasis on the low-voltage operation under 2.0 V and the minimization of the hardware resources. In the design and verification methodology, the overall architectures and the internal bit width have been determined through behavioral simulations. The overall performances including timing margin have been estimated through transistor-level simulations. Furthermore, the test results of the implemented chip using a 0.35-${\mu}{\textrm}{m}$ standard CMOS process proposed the validity of the proposed circuits and the design methodology.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.247-250
• /
• 1999

This paper presents characteristics of neuron-MOSFET for the implementation of logic circuits such at the inverter and D/A converter. Neuron-MOSFETS were fabricated using double poly CMOS process. From the measured results, it was found that noise margin of the inverter was dependant on the coupling ratio and a complete D/A characteristics of the source follower could be obtained by using any input Sate as a control gate.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.6
• /
• pp.988-994
• /
• 1986

We present an automated CMOS standard cell design mehtodology which generates a mask description in the CIF (Caltech Intermediate Form)from a user-given logic description and design rule. The resultant layout reflects the user's choice among N-well, P-well and twin-well process and user's decision whether the guard band is to be included or not. Noise margin of each cell was improved by carefully adjusting the channel width of P-FET.

• Journal of IKEEE
• /
• v.17 no.3
• /
• pp.260-266
• /
• 2013

The open bit line is vulnerable to noise compared to the folded bit line when read/write for the DRAM. According to the increasing DRAM densities, the core circuit operating conditions is exacerbated by the noise when it comes to the open bit line 6F2(F : Feature Size) structure. In this paper, the interference effects were analyzed by the data patterns between the bit line by experiments. It was beyond the scope of existing research. 68nm Tech. 1Gb DDR2, Advan Tester used in the experiments. The noise effects appears the degrade of internal operation margin of DRAM. This paper investigates sense amplifier power line splits by experiments. The noise can be improved by 0.2ns(1.3%)~1.9ns(12.7%), when the sense amplifier power lines split. It was simulated by 68nm Technology 1Gb DDR2 modeling.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.577-580
• /
• 2004

Our paper focus on crosstalk noise problem, especially crosstalk glitch that occurs when victim is stable state and aggressor is transitive state. This generated glitch weigh with the functional reliability if the glitch is considerable. In this paper, we use buffer insertion, down sizing, buffer insertion with up-sizing methods concurrently. These methodologies use filtering effects which gates that have bigger noise margin than glitch width eliminates glitch. In addition, we do limited optimization in boundary of node's slack. Therefore, the operated node's changes are for nothing in other node's slack.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1333-1334
• /
• 2007

Page-oriented angle multiplexing Holographic data storage system is the one of promising techniques for high capacity and data transfer rate, but its size and narrow tilt margin is pointed as a demerit. To overcome this weak point, in this paper, 2-axis deck mechanism for compensation of disc is employed to Compact size Holographic Data Storage (CHDS) which consists of minimized optical components and small 2-axis actuator moving linear & angle direction. Compensation of radial/tangential disc tilt with 2-axis deck mechanism is demonstrated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.281-286
• /
• 2007

Needs of fuel's performance evaluation for the dual-cooled fuel pellet (annular shape) necessitate the irradiation test in the test reactor. Irradiation test rig for the HARARO reactor, which is a special-purposed equipment used for material, irradiation and creep test, must satisfy the operational requirement on the hydraulic characteristics and structural integrity. In this paper, pressure drop and flow-induced vibration test for the newly developed non-instrumented test rig were carried out using FIVPET as a out-pile evaluation test. The test results show that the new test rig satisfy the HANARO operational requirement with sufficient margin. The spectral response characteristics of the flow-induced vibration of the test rid were also discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.226-229
• /
• 2008

To investigate an in-pile behavior of the newly developed DUO fuel pellet, the irradiation test will be carried out in the domestic test reactor. Irradiation test capsule for the HANARO reactor, which is a specially designed equipment used for material, irradiation and creep test, must satisfy the operational requirement on the hydraulic characteristics and structural integrity. In this study, a pressure drop, a flow-induced vibration and a short-term endurance test for the newly developed non-instrumented test capsule were carried out using FIVPET as a out-pile evaluation test. The test results show that the new test rig satisfy the HANARO operational requirement with sufficient margin.