• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.6
• /
• pp.415-422
• /
• 2003

In an apartment buildings, the floor Impact sound from upstairs has been regarded as a main source of noise causing discontentment among occupants. To set the optimum design for sound insulation, it is necessary to suggest the useful tools or technique that predict the floor impact sound. The purpose of this study is to suggest the supplementary formula(equation) and constant k considering vibration transmissibility in order to predict more precisely heavy floor impact sound by Impedance Method that have been briskly studied in Japan from comparing the measured values with the predicted values. The analyzed results had showed that if the damping material was glass wool or rubber, k=5 was proper and if the damping material was polystyrene foam, k>5 was desirable.

• Journal of Environmental Impact Assessment
• /
• v.3 no.2
• /
• pp.77-84
• /
• 1994

The study is to analyze the contents of Environmental Impact Statement(EIS) and supplementary EIS prepared from 1981 to 1992. The contents are project area, project cost, EIS volume, project term, assessment term, EIS preparation cost, land use plan, and kinds of predictive model concerning air quality, water quality, noise and vibration etc. by project type. Data are collected with EIS analysis checklist and analyzed by $SPSS/PC^+$.

• Journal of Environmental Impact Assessment
• /
• v.4 no.3
• /
• pp.1-8
• /
• 1995

In generally speaking, the purpose of Environmental Impact Assessment(EIA) is to give the environment its due place in the decision-making process by clearly ealuating the environmental consequence of a proposed activity before action is taken. The introduction of conventional EIA is to be seen as an end product of a very long evolutionary process, starting with rudimentary but evolving pollution control measures for air, water, noise, land and chemicals, each governed by separate, and separately administered pieces of legislation. In EIA process, the measures of status, scoping, proposed mitigation and communication have not been very quantitative in their significancy. Of course, the determinations have uncertainity in the implications for significant impacts. To improve the determination of significant impacts, some more comprehensive methodologies of EIA has been proposed with the concepts of risk analysis in the proposed projects. The concepts of risk analysis has been introduced to the expression of human health impairment due to environmental pollutants since the early 1980's. The risk analysis being meant by the statistical significance of impact has a process quantitatively considering uncertainities and importances of ecological systems and human health as well. The process of risk analysis shows assessment, doseresponse in toxicity, exposure assessment and risk characterization. With the risk assessment, it could be suggested for the proper measurements against their anticipated risk in the EIA. This paper deals the priciples developing process and application of the risk-based analysis in EIA.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.105-108
• /
• 2007

Recently, due to the high interests for well being life, claims about noise ad vibration are increased very rapidly. Therefore more reliable and exact evaluation of noise impact has been required. Until now in Korea, only one prediction equation for the assessment of railway environmental noise was used. But that equation has many limits and weak points because of the update was not performed from 1993. So in this study, the performance of another equation proposed by authors was compared to the former. As a result, proposed prediction equation may be used to evaluate the impact of railway noise in the future.

• Journal of Environmental Impact Assessment
• /
• v.15 no.6
• /
• pp.453-458
• /
• 2006

A turnout system which permits trains to pass from one track to another consists of the switch, the crossing, lead rails which are necessary to connect the switch and the crossing, two guard rails and a switch machine for operating the switch. A turnout is the sole moving part among the railway components and has complex configuration, so the safety has always been raised an issue. In Korea, it is planned to adopt the high speed tilting train, which operates at the maximum speed of 180km/h, at conventional lines by the year of 2010. However, for the application of the tilting train to conventional lines, it is prerequisite to establish a stable turnout system allowing the tilting train to pass through it without reducing speed. Therefore, the improved turnout system for the speed-up of conventional lines has been developed and the prototype of the turnout system has been constructed. In this study, evaluation of noise characteristics around the improved turnout system was performed through the field measurements. Field measurements of noise around the conventional and the high-speed turnout system were also carried out for the comparison.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.11
• /
• pp.1064-1068
• /
• 2007

Around metropolitan landfill area, specific vehicles such as garbage carrying trucks make noise problems and residents near landfill area organized to protest. However, it is difficult to distinguish the effect of noise of specific vehicles (ex: garbage trucks). In this study, noise map and CRTN were used to assess the noise from specific vehicles. Noise levels, which were predicted by using measured parameters such as traffic flow, traffic speed, composition of traffic for 1 year, were compared with measured results of noise level.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.222-226
• /
• 1997

The reproducibility of measured level is a prior condition for the reliable assessment of the sound insulation performance. To review the reproducibility of impact sound level, 20 floors were selected in highrise apartment house, and then impact sound levels of two kinds of typical floors were measured with 10 times in each receiving point. The impact sound insulation class values were derived with a standard tapping machine and bang machine. Inspection of the result showed that smaller scale of the room caused to lower the reproducibility and that the higher values of standard deviation in lower frequency caused to deteriorate the reliability of assesment. Thus to enhance the reproducibility of the impact sound insulation class, greater allowable deviation of measured level is required in lower frequency than in higher one.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.1
• /
• pp.3-8
• /
• 2013

Recently, the impact on hearing induced by using of portable audio equipment have been actively studied. In general, Because they turn the volume up with loud background noise, they may expose to louder noise. In this study, we investigated the maximum noise level of 20 the domestic potable audio equipment and estimated the impact of the hearing induced by portable audio equipment in according to exposure time. As a result, the use of portable audio equipment is assumed to be more three hours when the level of more than 50 % of volume is most likely to affect the hearing.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.6 no.2
• /
• pp.39-46
• /
• 2023

Purpose: The small-scale environmental impact assessment system in Korea was introduced and implemented in August 2000, but it has a problem that it cannot guarantee implementation due to the large proportion of qualitative reduction measures for each evaluation item. Therefore, when preparing a small-scale environmental impact assessment, research was conducted on how to improve the existing simple listing-type reduction measures and qualitative evaluation standards to quantitative reduction measures and evaluation standards reflecting regional characteristics. Research design, data and methodology: The small-scale environmental impact assessment system in Korea was introduced and implemented in August 2000, but it has a problem that it cannot guarantee implementation due to the large proportion of qualitative reduction measures for each evaluation item. Therefore, when preparing a small-scale environmental impact assessment, research was conducted on how to improve the existing simple listing-type reduction measures and qualitative evaluation standards to quantitative reduction measures and evaluation standards reflecting regional characteristics. Results: As a result of the analysis of qualitative and quantitative factors, the arithmetic sum of the qualitative factors of the total six projects is 160, accounting for 80% of the total number of reduction measures, and the quantitative factors are 40, accounting for 20%. Among them, the number of qualitative reduction measures reached 97.4% for animal and plant items, and more than 90% for air quality, noise and vibration, and eco-friendly resource circulation items. Conclusions: Therefore, it is necessary to avoid establishing qualitative reduction measures and set quantitative measures as the basis, but to specify the specifications, size, and installation location related to the reduction measures, and to calculate the numerical reduction efficiency.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.818-823
• /
• 2012

Assessment of the dynamics properties, like damping, dynamic stiffness and resonance sharpness is essential for the development of a robust system, specifically for the reduction of a traction motor noise. A practical method for identifying dynamic characteristics of a traction motor hosing for an electric vehicle is proposed. Assembling using interference fit of the components of the motor is attributed to the main cause of strong nonlinearity. It is well known that nonlinearity of a structure makes it difficult to assess damping properties or dynamic characteristics of the system. This research presents a practical damping or dynamic stiffness identifying procedures for a nonlinear system according to the boundary condition between assembled components. Based on the simple idea that impact forces of modal tests are highly affected on the condition of the hammer tip, Auto Power Spectrum of the impact forces are used to assess the assembling condition and dynamic characteristics of the system, especially, damping of the system.