• ETRI Journal
• /
• 제29권1호
• /
• pp.110-112
• /
• 2007

As an alternative to the classic linear detector which only assumes noise variance, a new robust detector with noise variance estimation censoring input signals over AWGN is proposed. The results demonstrate that analytic detection probability matches the simulation results for the linear detector and that the new robust detector shows better performance than the linear detector when the number of samples increases.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.438-442
• /
• 2006

Reasonably accurate estimation of the exposed population to the distinct levels of noise is essential to the efficient management of urban environmental noise. This study proposes a method of calculating the number of exposed people to industrial noise by using GIS tool and noise mapping. The exposed population of noise based on estimation of the number of people that lived in each building in urban area is compared with the one based on density of population. This study suggests the six step method that consists of gathering the fundamental data, extracting the property from the digital map, noise mapping based on the three dimensional topography, estimating population that lives in each building, merging the various results with GIS tool, and estimating exposed population to industrial noise through analyzing the noise map with GIS tools

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.203-204
• /
• 2019

Recently, the number of conflicts and complaints related to noise between floors is increasing every year. It is essential to acquisition objective noise data in order to resolve legal disputes over floor noise. However, specialized equipment for noise acquisition is difficult for ordinary apartment dwellers to use. In addition, in order to solve the problem of inter-layer noise, it is most effective to locate and remove the noise. Therefore, this study proposes a floor noise monitoring system for the measurement of floor noise and estimation of the noise source that can be measured without a professional device.

• International Journal of Control, Automation, and Systems
• /
• 제6권6호
• /
• pp.818-827
• /
• 2008

In this paper, we propose a new noise estimation and reduction algorithm for stationary and nonstationary noisy environments. This approach uses an algorithm that classifies the speech and noise signal contributions in time-frequency bins. It relies on the ratio of the normalized standard deviation of the noisy power spectrum in time-frequency bins to its average. If the ratio is greater than an adaptive estimator, speech is considered to be present. The propose method uses an auto control parameter for an adaptive estimator to work well in highly nonstationary noisy environments. The auto control parameter is controlled by a linear function using a posteriori signal to noise ratio(SNR) according to the increase or the decrease of the noise level. The estimated clean speech power spectrum is obtained by a modified gain function and the updated noisy power spectrum of the time-frequency bin. This new algorithm has the advantages of much more simplicity and light computational load for estimating the stationary and nonstationary noise environments. The proposed algorithm is superior to conventional methods. To evaluate the algorithm's performance, we test it using the NOIZEUS database, and use the segment signal-to-noise ratio(SNR) and ITU-T P.835 as evaluation criteria.

• 전자공학회논문지B
• /
• 제32B권6호
• /
• pp.876-877
• /
• 1995

The techniques for the estimation of motion vector from the image sequence assume implicitly that the intensity of image is constant through the time. But this assumption can be distored by such causes as the added noises and the sub-pel motion following the sampling, and the errors can be generated on the motion estimation by the change of intensity. In this paper, we analyzed theoretically the effect of the change of intensity by the noise on the motion estimation with the white Gaussian noise. We know a fact that the signal may be fluctuated to reduce the effect of the noise and so the sampling rate have to make down. Also we confirmed the theoretically analysis through the experiments which investigated the relation between the noises and the sampling rates.

• 한국소음진동공학회논문집
• /
• 제24권7호
• /
• pp.509-516
• /
• 2014

This paper proposes estimation model of uncertainty in vibration measurement of shipboard equipment and analyzes the result of uncertainty estimation. Vibration of shipboard equipments affects underwater radiated noise that is important performance related to stealth of the naval vessel. Acceptance testing for shipboard equipment is required to guarantee the stealth performance of naval vessel. In measuring, detailed uncertainty estimation is essential to improve measuring reliability. Acceptance testing result of structure-borne noise and vibration is used to analyze uncertainty in vibration measurement of shipboard equipment.

• 한국정보통신학회논문지
• /
• 제27권1호
• /
• pp.54-61
• /
• 2023

IoT 기술과 인공지능의 발전에 따라 다양한 디지털 영상장비가 산업현장에서 사용되고 있다. 영상 데이터는 카메라 또는 센서에서 취득되는 과정 중 잡음에 훼손되기 쉬우며, 훼손된 영상은 영상처리 과정에서 악영향을 미치기 때문에 전처리 과정으로 잡음제거가 요구되고 있다. 본 논문에서는 랜덤 임펄스 잡음에 훼손된 영상을 복원하기 위해 잡음추정에 기반한 스위칭 필터 알고리즘을 제안하였다. 제안한 알고리즘은 영상의 국부마스크 내부의 화소값의 유사성에 따라 잡음추정과 에러 검출을 진행하였으며, 국부마스크에 존재하는 잡음 비율에 따라 필터를 선택하여 스위칭하였다. 제안하는 알고리즘의 잡음제거 성능을 분석하기 위해 시뮬레이션을 진행하였으며, 확대영상 및 PSNR 비교 결과 기존 방법에 비해 우수한 성능을 나타내었다.

• 한국통신학회논문지
• /
• 제19권6호
• /
• pp.994-1003
• /
• 1994

본 논문에서는 차량 잡음 환경하에서 하나의 마이크로폰 구조를 사용하여 스펙트럼 차감법을 이용한 잡음 제거 방법을 제안하였다. 변화하는 잡음에 의하여 손상된 음성신호에서 잡음의 성분을 제거하기 위하여 여러 상황에서의 차량 잡음을 분석하고 특성을 알아보았다. 음성/비음성의 분류와 잡음의 스펙트럼을 추정하기 위하여 잡음 분석을 바탕으로 음성/비음성 분류함수를 제안하였다. 이 분류함수에 의하여 적은 계산량으로 간단하게 정확한 음성/비음성의 분류가 가능하다. 또한 정확한 잡음의 스펙트럼 추정이 가능하다. 제안된 음성/비음성 분류함수에 의한 잡음의 스펙트럼 추정으로 인하여 왜곡이 거의 없는 깨끗한 음성신호를 추출할 수 있었다.

• 한국소음진동공학회논문집
• /
• 제24권10호
• /
• pp.770-779
• /
• 2014

In this study, a numerical estimation method for 3D underwater radiated noise pattern using hull vibration and total acoustic power of the vibrating structure in the far-field is proposed. The underwater radiated noise pattern is known to be predicted using the vibration signals and radiation efficiency of each surface patch. But it is very difficult to know radiation efficiency of each surface patch which is one of important factors to calculate the 3D underwater radiated noise pattern. Instead of using radiation efficiency of each patch, the underwater radiated noise level is modified with the total acoustic power of the vibrating structure. The suggested estimation method for underwater radiated noise pattern is discussed with numerical model.

• 한국통신학회논문지
• /
• 제33권9C호
• /
• pp.720-724
• /
• 2008

OFDM 시스템에서의 채널 추정은 주로 주파수 영역에서 수신단에 알려진 파일럿 신호를 이용하여 이루어진다. 이러한 채널 추정은 크게 LS 기법과 MMSE 기법으로 나누어지는데 LS 기법은 MMSE 기법보다 복잡도가 낮아서 구현이 간단하다는 장점이 있지만 잡음의 효과를 고려하지 않기 때문에 MMSE 기법보다 추정 성능이 다소 떨어진다. 본 논문에서는 이러한 LS 기법의 단점을 극복하기 위하여 시간영역으로 변환된 채널 계수에 최적의 문턱값(Threshold)을 적용하여 잡음을 제거함으로써 채널 추정의 성능을 향상시킬 수 있는 방법을 제안한다. 문턱값은 주파수영역에서 추정된 채널 계수의 웨이브렛 변환을 통하여 얻어진 표준편차에 의해 결정된다. 모의실험을 통해 제안된 방법이 기존 LS 기법보다 모든 SNR에서 채널 추정 성능이 우수함을 보인다.