• The Journal of the Acoustical Society of Korea
• /
• v.14 no.3
• /
• pp.114-121
• /
• 1995

Outdoor experimental study is presented the insertion loss caused by barrier considering discontinuous ground condition. Measurements ware made in 1/3 octave band over the frequency range 315 Hz~3150 Hz with the various geometry of the source, receiver and barriers. The frequency range of the interference pattern depends on the phase difference between path from the edge of barrier to receiver, and hence on the acoustical properties of the ground on the receiver side of the barrier. The insertion loss by barrier, in addition to diffraction, is shown to be dependent on the ground characteristic.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.145-149
• /
• 2001

In this study, an acoustical characteristics of sound proof panel for high speed train was performed. A sound absorption coefficient and transmission loss of sound proof panels for high speed train were tested in reverberation chambers and compared those of ordinary sound proof panel. The effect of noise barrier was simulated by using ray noise program with measured sound absorption coefficient for high speed train case and for ordinary case.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.361-368
• /
• 1998

This paper sums up the study of the soundproof facilities to be placed on the test track section within the Seoul-Pusan H.S.T project. The objective of this study is to determine optimum design of soundproof including height, length, location, sound absorbing materials for test track(chonan-taejon). This paper shows the model to design the shape and materials of noise barrier for high speed trains(TGV, ICE, etc). Noise prediction is to be conducted by MITHRA. Various parameters affecting the noise propagation outdoors are surveyed and discussed in relation to H.S.T. noise.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.3
• /
• pp.111-116
• /
• 2013

Noise problem that occurs on the road is raising a lot of problems in the economic, social and environmental aspects. The objective of this paper is to propose ANC(active noise cancellation)-based road traffic noise reduction algorithm-model which can reduce noise by generating frequency opposed to noise sources to improve and complement the problem that existing physical form of a noise barrier. In this paper, we measured the noise characteristic from collection of two difference car noise also ANC simulation has been performed by using road traffic noises input. In order to compare the control performance, we performed noise reduction simulation of ANC by filtered-X LMS algorithm and delayed control signal injection. As a result of this simulation, we confirmed that convergence performance and noise decrease effect to the filtered-X LMS algorithm by inputting the road traffic noise.

• Journal of the Korean Society for Railway
• /
• v.10 no.3 s.40
• /
• pp.278-283
• /
• 2007

Community noise, especially a rail traffic noise has been serious social issues in Korea. Our society needs practical tools to reduce noise levels for public who live near the railway lines. This paper proposes a noise reducer for railway traffic noise. At the beginning, various types of reducers are discussed, with the advantages and disadvantages with respect to acoustical phenomena. Then, the acoustic effects are discussed based on an insertion loss measurement. After several types of reduces are installed at fields, the noise level is monitored with and without the reducer. The result shows that the proper selection of reducers affects the noise level by 6 dB. The statistics of the mean and a standard deviation turns out to be 3.2 dB and 0.8 dB, respectively. Noise reducers are strongly recommended for the place where apartments are densely constructed alone the railway. Installation of noise reducers seems to be an effective and practical solution for the community traffic noise reduction.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.4
• /
• pp.192-197
• /
• 2013

Road traffic noise barriers being used to reduce the noise, but the city surroundings inhibition, ecosystem disturbance, and it is difficult to maintain. Can enhance or complement the existing noise barrier performance, so that it is necessary to develop an electronic noise-reduction system In this paper, we proposed an electronic road noise reduction devices to reduce road noise for a DSP-based signal processing and analog signal input-output controller. In order to verify the control performance, we performed noise reduction experimentation of ANC by filtered-X LMS algorithm and traffic noise signal injection. The controller is equipped with noise reduction algorithms were tested on the characteristics of directional and omnidirectional speaker.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.563-563
• /
• 2013

Railway noise has been a social issues nowadays in our community. This paper discusses the environmental noise problem along railway lines. We overview the noise level and noise exposed populations due to conventional and high speed train operation at first. Then we introduce variety of noise reduction schemes to protect the community based on an engineering approach. Some applicationcases to reduce the noise will be demonstrated. Finally, we propose the noise barrier tunnel as a tool of a generic solution to reduce the community noise along railway lines.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.3 s.120
• /
• pp.207-212
• /
• 2007

Community noise has been great concerned in public. The traffic noise in seoul, especially has been growing awareness for the quiet living environment. In this paper, the effect on the noise barrier in order to reduce highway noise near on the street has been examined. First barriers have been evaluated at 5 locations in the city. The evaluation is performed before and after construction, with the reference point which does not affected on road traffic volume. Then, noise reducers mounted on the harriers also have been examined. the result shows that it reduces noise level by $3{\sim}3.5dB(A)$ with a standard deviation of 2.8 dB(A).

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.1
• /
• pp.58-64
• /
• 2015

There are a lot of different types of noise from construction site and it depends on construction stage, equipment type and number of operating equipments. The problem is that the almost noise from construction site is high level and some kinds of noise levels are over 100 dB. In addition, if construction site is located in downtown, there are a few options to reduce noise level. Therefore several site mitigation plans were developed to reduce different types of construction noises such as breaker work, gang form and asphalt saw. They were applied in site and evaluated noise reduction performance. The test result of site insertion loss was between 4~8 dB depends on the equipment and type of work.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.101-104
• /
• 2007

All of noise prediction model have it's own features in the case of modeling conditions, so it is very important to know the features of each model case by case for a proper modeling, especially using at the Environmental Impact Assessment. For prediction of highway traffic noise and abating the noise by barriers, two kinds of prediction model, HW-NOISE, KHTN(Korea Highway Traffic Noise) has been mainly used in Korea. In this study, the features of these models were described at the same conditions. The properties of sound power from a road, diffraction characteristics from a barrier, sound pressure level decaying in each model were investigated. Using the results, it will be anticipated that the proper using of prediction models in the works of highway noise abating.