• Investigative Magnetic Resonance Imaging
• /
• v.21 no.4
• /
• pp.210-222
• /
• 2017

Purpose: To develop a novel combination of controlled aliasing in parallel imaging results in higher acceleration (CAIPIRINHA) with integrated SSFP (CAIPI-iSSFP) for accelerated SSFP imaging without banding artifacts at 3T. Materials and Methods: CAIPI-iSSFP was developed by adding a dephasing gradient to the balanced SSFP (bSSFP) pulse sequence with a gradient area that results in $2{\pi}$ dephasing across a single pixel. Extended phase graph (EPG) simulations were performed to show the signal behaviors of iSSFP, bSSFP, and RF-spoiled gradient echo (SPGR) sequences. In vivo experiments were performed for brain and abdominal imaging at 3T with simultaneous multi-slice (SMS) acceleration factors of 2, 3 and 4 with CAIPI-iSSFP and CAIPI-bSSFP. The image quality was evaluated by measuring the relative contrast-to-noise ratio (CNR) and by qualitatively assessing banding artifact removal in the brain. Results: Banding artifacts were removed using CAIPI-iSSFP compared to CAIPI-bSSFP up to an SMS factor of 4 and 3 on brain and liver imaging, respectively. The relative CNRs between gray and white matter were on average 18% lower in CAIPI-iSSFP compared to that of CAIPI-bSSFP. Conclusion: This study demonstrated that CAIPI-iSSFP provides up to a factor of four acceleration, while minimizing the banding artifacts with up to a 20% decrease in the relative CNR.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.2
• /
• pp.55-60
• /
• 2011

In this paper, we propose a new method for extracting muscles from lumbar images. The proposed method sets areas without distortions with field expert's assistance as areas of measuring interest and removing noises from initial ultrasonic videos. Then, the method emphasizes the brightness contrast with Ends-in search stretching algorithm and separate thoracic vertebra from subcutaneous fat area using morphological characteristics. 4-directions contour tracing algorithm is applied to extract the bottom of subcutaneous fat area. Extracting thoracic vertebra area requires noise removal and morphological characteristics as well among candidate areas obtained by controlling min-max brightness. The thickness of muscles is then defined as the length between subcutaneous fat area and extracted thoracic vertebra. The experiment which consists of 368 image analysis verifies that the proposed method is more effective in measuring the thickness of muscles than before.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.12
• /
• pp.41-50
• /
• 1999

In this paper, the new VLSI architecture of a reconstruction filter for morphological image segmentation is proposed. The filter, based on the $h_{max}$ operation, simplifies the interior of each region while preserving the boundary information. The proposed architecture adopts a partitioned memory structure and an efficient image scanning strategy to reduce the operations. The proposed memory partitioning scheme makes it possible that every data required for processing can be read from each memory at a time, resulting in parallel data processing. By the extended connectivity consideration, the operation is much decreased because more simplification is achieved in scanning stage. The selective raster scan strategy endows the satisfactory noise removal capability with negligible hardware complexity increase. The proposed architecture is designed using VHDL, and functional evaluation is performed by the CAD tool, Mentor. The experiment results show that the proposed architecture can simplify image profile with less than 18% operations of the conventional method.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.7
• /
• pp.135-141
• /
• 2009

For more reliable estimation of soil-structure interaction and seismic source and attenuation properties, site amplification function should be considered. This study use the Nakamura's method (1989) for estimating site amplification though various methods for the same purpose have been proposed. This method was originally applied to the surface waves of background noise and therefore there are some limitation for applications to general wave energy. However, recently this method has been extended and applied to the S wave energy successfully. This study applied the method to the coda wave energy which is equivalent to the backscattered S wave energy. We used more than 60 observed ground motions from 5 earthquakes which occurred recently, with magnitude range from 3.6 to 5.1 Each station showed characteristic site amplification property in low-, high- and resonance frequency ranges. In the case of comparing these results to those from S wave energy, lots of information to the site classification work can be gained. Moreover, removal of site amplification can give us more reliable seismic source parameters.

• Journal of the Korean Society of Radiology
• /
• v.9 no.3
• /
• pp.139-145
• /
• 2015

When examining a patient using SPECT, gamma rays emitted from the body decrease or scatter. And when they reach the detector they spread in accordance with physical characteristics and geometric shapes of the scanner, quantitative analysis was difficult. For exact quantitative analysis of gamma rays emitted from the body, so that they must be considered to correction about PVE(partial volume effect). In this paper, sinogram filter was implemented to solve comprehensive PVE of SPECT. According to the results in which implemented filter was applied, partial volume effect caused by SPECT was removed. To compare proposed method and conventional method, PSNR(Peak Signal to Noise Ratio) was executed. As a result, proposed method was indicated as 7dB, conventional method was indicated as 14db respectively. dB(decibel) level of the proposed methods is lower, since the MSE(mean square error) becomes greater because scattered ray was removed, PSNR value is low. Therefore, by applying the proposed method for removing the PVE of SPECT imaging method, the image quality is improved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5280-5287
• /
• 2014

This paper proposes a method in which classes are grouped as a hierarchical tree structure for the effective classification of the Raman spectra. As experimental data, the Raman spectra of 28 chemical compounds were obtained, and pre-treated with noise removal and normalization. The spectra that induced a classification error were grouped into the same class and the hierarchical structure class was composed. Each high and low class was classified using a PCA-MAP method. According to the experimental results, the classification of 100% was achieved with 2.7 features on average when the proposed method was applied. Considering that the same classification rates were achieved with 6 features using the conventional method, the proposed method was found to be much better than the conventional one in terms of the total computational complexity and practical application.

• Journal of Digital Contents Society
• /
• v.10 no.3
• /
• pp.381-388
• /
• 2009

This paper proposes a denoising method for the contour edges and crease edges of silhouette obtained from 3D scanned data of stone cultural heritages. It is often the case that the silhouette involves noise in the form of short-length line segments, due to rough surfaces of stone cultural heritages, weathering, and technical difficulties arising in data acquisition. Thus the removal of the short-length line segments from the contour edges and crease edges can result in a clear and accurate silhouette. An efficient computational algorithm is introduced to count the continuity of line segments; edges having not more than 3 line segments are removed. It has been verified that the new method is more effective than threshold-based silhouette extraction methods for stone heritages. Our method is applicable for various other data which are deteriorated by short-length line segments.

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.2
• /
• pp.14-20
• /
• 2003

This paper presents a text extraction method of camera based document image. It is more difficult to recognize camera based document image in comparison with scanner based image because of segmentation problem due to variable lighting condition and versatile fonts. Both document binarization and character extraction are important processes to recognize camera based document image. After converting color image into grey level image, gray level normalization is used to extract character region independent of lighting condition and background image. Local adaptive binarization method is then used to extract character from the background after the removal of noise. In this character extraction step, the information of the horizontal and vertical projection and the connected components is used to extract character line, word region and character region. To evaluate the proposed method, we have experimented with documents mixed Hangul, English, symbols and digits of the ETRI database. An encouraging binarization and character extraction results have been obtained.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.75-81
• /
• 2012

Road identification is the important task for extracting a road region from the high-resolution satellite images, when the road candidates is extracted by the pre-processing tasks using a binarization, noise removal, and color processing. Therefore, we propose a noble approach for identifying a road using the orientation-selective spatial filters, which is motivated by a computational model of neuron cells found in the primary visual cortex. In our approach, after the neuron cell typed spatial filters is applied to the isolated connected-labeling road candidate regions, proposed method identifies the region of perceiving the strong orientation feature with the real road region. To evaluate the effectiveness of the proposed method, the accuracy&error ratio in the confusion matrix was measured from road candidates including road and non-road class. As a result, the proposed method shows the more than 92% accuracy.

• Speech Sciences
• /
• v.8 no.4
• /
• pp.87-98
• /
• 2001

Vocal nodule is one of the representative chronic diseases of vocal folds, and it can be cured by surgical removal or voice therapy. The aim of this study is to evaluate the effect of the accent method, one of the popular effective voice therapy, in the patients with vocal nodule. Authors executed the accent method in 17 patients with vocal nodule who visited the Voice & Speech Therapy Clinic, Pusan National University Hospital analysed the voice before and after treatment using the local findings, acoustic analysis and aerodynamic analysis MPT. The voice was analysed with MDVP of CSL and MPT was checked using stop watch. The parameters included Fo, Jitter, Shimmer and noise to harmonic ratio(NHR) as acoustic analysis. The results were obtained as follows. In the evaluation by the local findings, it was improved to 77% in the patients of vocal nodule. Jitter and Shimmer were shown to be improved significantly. In particular, it was shown to be improved significantly in patients with vocal nodule. As the result of this study, the improvement of aerodynamic aspect was more statistically significant than that of acoustic parameters. When I generalized the above mentioned results, we suggest that it is a useful voice therapy which can be helpful to the improvement of voice, applying the accent method to the vocal nodule patients, and there are currently many methods to be used in the voice therapy, but it is thought which the accent method is the good treatment as the alternatives of keeping the continuous medical treatment.