• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.364-370
• /
• 2020

Rocket noise generated from the exhaust plume produces the enormous acoustic loading, which adversely affects the integrity of the electronic components and payload (satellite) at liftoff. The prediction of rocket noise consists of two steps: the supersonic jet exhaust is simulated by a method of the Computational Fluid Dynamics (CFD), and an acoustic transport method, such as the Helmholtz-Kirchhoff integral, is applied to predict the noise field. One of the difficulties in the CFD step is to remove the boundary reflection artifacts from the finite computation boundary. In general, artificial damping, known as a sponge layer, is added nearby the boundary to attenuate these reflected waves but this layer demands a large computational area and an optimization procedure of related parameters. In this paper, a cost-efficient way to separate the reflected waves based on the two microphone method is firstly introduced and applied to the computation result of a laboratory-scale supersonic jet noise without sponge layers.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.4
• /
• pp.205-213
• /
• 2012

Active acoustic array signal was measured in the East Sea and the South sea and spatial coherence was analyzed. The measurement of ambient noise, target reflection signal, sea surface backscattering signals took place including environmental measurements of sea wind, and vertical temperature profiles. The spatial coherence of ambient noise was lower than that of target reflection signal in the South Sea. The spatial coherence of target reflection signal was above 0.5 over all array length. The spatial coherence of sea surface backscattering signal was higher in high incident angle. The maximum non-dimensional array length was 3.0 ($26^{\circ}$) and 3.5 ($32^{\circ}$) to have spatial coherence above 0.5 in the East Sea. To find a design criteria for array configuration and array performance, more measurements of temporal and spatial coherence will be needed continuously in the future.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.1
• /
• pp.69-74
• /
• 2016

A technique for improving estimation accuracy is introduced in order to locate the impact position of artillery shell during the weapon scoring test. Study on localization of impacts using acoustic measurement has been conducted and the usability of sensor array is verified with experiments. When the blast occurs above the ground in the firing range, the acoustic sensor above the ground can measure the directly propagated sound with the ground-reflected one. In this study, a method for reducing estimation error by using the reflection signal measurements based on the time difference of arrival method. Considering the reflection sound works as same as placing a virtual sensor symmetrically through the ground. This idea enables a virtual three-dimensional array configuration with a two-dimensional plane array above the ground as such. The time difference between the direct and the reflected propagations can be estimated using cepstrum analysis. Performance test has been made in the simulation experiment in the football size area.

• The Journal of Engineering Geology
• /
• v.16 no.2 s.48
• /
• pp.161-169
• /
• 2006

A short seismic reflection survey was performed to map the basement and the upper units in the Gomso Bay. This research was mainly aimed at clarifying the basement by improving the signal-to-noise ratio in data processing steps. The strategies employed in this research included enhancement of the signal interfered with large-amplitude noise, through pre- and post-stack processing such as time-variant filtering, bad trace edit, careful muting after f-k filter and NMO correction. The subsurface structure mapped from this survey mainly consists of the top of basement and the upper three units, which were well correlated to the result from the previously conducted MT survey. Furthermore seismic section clarifies approximately 30m deep subhorizontal event of the top of the basement, which was not shown in the central portion of the MT section due to data qualify.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.4
• /
• pp.295-300
• /
• 2013

The noise map can be applied to predict the effect of noise and establish the noise reduction measure. But the predicted value in the noise map can vary depending on the input variables. Thus, we surveyed the several prediction models and analyzed the changes corresponding to the variables for obtaining the coherency and accuracy of prediction results. As a result, we know that the Schall03 and CRN model can be applied to predict the railway noise in Korea and the correction value, such as bridges correction, multiple reflection correction, curve correction must be used for reflecting the condition of the prediction site. Also, we know that the prediction guideline is an essential prerequisite in order to obtain the unified and accurate predicted value for railway noise.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1044-1049
• /
• 2007

The construction of concrete slab track system is increased because the system has advantages which are maintenance free and so on, the other side, the system has weak points such as increase of the cost of the early stage construction and noise levels. The increment of noise is due to the reflection of generated noise on the slab tracks. Therefore the acoustic-absorptive materials are considered to reduce noise level. It has been made clear that acoustic-absorptive materials are effective for reducing the wheel/rail noise on slab tracks. The important performance of the acoustic-absorptive material is absorption rates and absorption rates are verified for the considered absorber elements using acoustic duct method. In addition, the required provisons for installing acoustic-absorptive block on slab tracks are considered.

• Journal of KSNVE
• /
• v.4 no.3
• /
• pp.295-305
• /
• 1994

The reflection coefficient of a material at oblique incidence is measured in a free field. The sound pressure distributions are measured at discrete points on two measurement lines and then decomposed into plane wave components by using spatial Fourier transform. The inciedent and reflected plane wave components are obtained from a set of "decomposition equations" of which uses the plane wave propagation theory. Numerical simulations and experiments have been performed to see the effect of finite size of measurement area. To reduce this effect, a window fuction has been performed to see the effects of finite size of mesurement area. To reduce this effect, a window function has been proposed and its effect on the measurement of sound absorbing material property has been studied as well. The reflection coefficient obtained by this method is compared with those obtained from other methods; 2-microphone method in a duct and an expirical equation of which determines the characteristic impedance .rho.c and propagation constant k of a material from flow resistance information.formation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.535-540
• /
• 2005

In environmental impact assessment, noise impact assessment usually consists of three stages surveying the existing noise levels by measurements, predicting noise levels induced by construction works and predicting noise levels after the completion of project. When predicting noise level in urban area, this method does not consider acoustic phenomena like multi reflection, diffraction and absorption due to complex topographic configuration of building and terrains. For the purpose, a noise mapping tool is utilized to produce a series of noise maps, which are those for the present, for the works of construction and for the future. For accurate noise mapping, acoustical and topographic information is essential. Standard sound power levels and directivities of various construction equipments are required and scheduling of construction processes and locations of the equipments should be provided. In the case of exceeding legal limit, mitigation measures are applied to satisfy the legal limits and subsequent noise map is obtained and checked.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.11 s.104
• /
• pp.1311-1317
• /
• 2005

In environmental Impact assessment, noise impact assessment usually consists of three stages-surveying the existing noise levels by measurements, predicting noise levels induced by construction works and predicting noise levels after the completion of a project. The distance-attenuation relation of a point source, which has been used to predict the noise level due to its simplicity does not consider complex acoustic phenomena like multi-reflection, -diffraction and -absorption due to complex topographic configuration of buildings and terrains. For the consideration of such physical complexities. a noise mapping tool is adopted to produce a series of noise maps, which are those for the present, tot the works of construction and for the future. For accurate noise mapping, acoustical and topographic Information is used. Standard sound power levels and directivities of various construction equipments are need and scheduling of construction processes and locations of the equipments should be provided. In the case of exceeding legal limit, mitigation measures are applied to satisfy the legal limits and subsequent noise map is obtained and checked.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.5
• /
• pp.353-360
• /
• 2017

The single sensor based acoustic reflection control system separates the incident and reflected signals from the single sensor output, and reduces the reflected signal by generating an out-of-phase signal from the incident signal component. In this paper, we propose an optimal filter design method for a single sensor based reflection control system. In the proposed method, it is shown that the optimum control filter design is possible by using the measured impulse responses of the reflection and control paths. The reflection control algorithm based on the proposed optimal filter achieves better performance than the conventional adaptive filter-based algorithm and effectively controls the reflection without the initial convergence time. We performed computer simulations using the signals obtained in a 1-dimensional acoustic duct environment, and from the simulation results, it was confirmed that the proposed optimal filter has robust performance even in noisy environment.