• 한국소음진동공학회논문집
• /
• 제11권7호
• /
• pp.239-246
• /
• 2001

The present study addresses the open correction associated with the reflection and discharge phenomena of a weak shock wave from an open end of a duct. The open correction of the weak shock wave is investigated experimentally and by numerical computation. An experiment is made using a simple shock tube with an open end. and computaion is performed to simulate the experimental flow field using the unsteady, axisymmetric compressible. flow governing equations. The results obtained show the an open correction should be involved for shock wave discharge and reflection problems generated from the exit of the duct with an open baffle plate. With a baffle plate less than three times the duct diameter, it is found that the open end correction is a function of both the diameter of the baffle plate and normal shock wave magnitude However, for a baffle plate larger than three the duct diameter it is independent of the baffle plate diametre, The present computations predict the results of shock tube experiment with good accuracy. A new empirical equation for prediction of the open correction is found for the weak shock reflection and discharge phenomena occurring at the open of the duct with and without a baffle plate.

• 한국ITS학회 논문지
• /
• 제7권1호
• /
• pp.68-74
• /
• 2008

SIW (Substrate Integrated Waveguide) cavity 공진기의 구조는 유전체기판에 다수의 via-hole 을 이용함으로써 나타낼 수 있으며, rectangular waveguide 와 유사한 특성을 갖는다. 그리고 $50-{\Omega}$ 마이크로스트립라인과 SIW cavity 공진기 중앙간의 결합구조를 통하여 대역저지 특성이 나타나도록 하였다. 이러한 특성을 갖는 SIW cavity 공진기를 이용하여 X-band(9.45 GHz) 발진기를 제작하였고, 위상잡음은 100kHz offset에서 -98.1 dBc/Hz 로 측정되었다. SIW cavity 공진기는 높은 QL 값을 갖고, 2차원 구조이기 때문에 저비용에 우수한 위상잡음 특성을 갖는 발진기 설계에 응용할 수 있다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.68-72
• /
• 2002

Localization with array sensors has been applied for not only military but also non-military purposes. The identification of submarines and fish finding are those examples. Nowadays the demand for noise identification is increasing to characterize noise sources and improve acoustic performance of underwater acoustic equipment. For that reason KRISO/KORDI recently constructed an anechoic basin which bus reflection only at the free surface. This paper suggests a noise identification methods using MUSIC algorithm in such an acoustic field. For comparison phase delay sum and minimum valiance methods are also described. At first basic principles are described. A several numerical simulations are also performed. The results say that reflection effect many cause a new non-real source although good estimation is obtained under no reflection conditions.

• Journal of Magnetics
• /
• 제10권4호
• /
• pp.163-170
• /
• 2005

The RF integrated noise filters are fabricated by photolithography. The stack for the electromagnetic noise filters consists of the nano-granular ($Co_{41}Fe_{38}AI_{13}O_8$) soft magnetic film / $SiO_2$ / Cu transmission line / seed layer (Cu/Ti) / $SiO_2$-substrate. A good signal-attenuation feature along with a low signal-reflection feature is observed in the present filters. Especially in the noise filter incorporated with a $Co_{41}Fe_{38}AI_{13}O_8$ magnetic film with lateral dimensions of $2000{\mu}m$ wide, 15 mm long and $1{\mu}m$ thick, the maximum magnitude of signal attenuation reaches -55 dB, and the magnitude of signal reflection is below -10 dB in the overall frequency range. And this level of signal attenuation is much larger than that of a noise filter incorporated with a Fe magnetic film.

• 한국산학기술학회논문지
• /
• 제13권5호
• /
• pp.1996-2001
• /
• 2012

본 시각 검사시스템은 전자 부품과 같이 잘 형성된 표면 재료에 널리 사용되고 있다. 반사 능력이 나쁜 재료의 경우, 시각 검사시스템이 도입될 때 많은 문제점이 발생한다. 혼합 생산 라인에서 진위의 모델을 알 수 없을 때 저 반사비와 많은 노이즈에도 잘 작동할, 강인한 시각 검사시스템을 개발하였다. 유형을 인식하기 위하여 k-means를 이용한 작업물 인식 기법이 제안되었다. 인식 유형에 기반하여 active contour라는 노이즈에 강인한 분할 기법이 영상에서 특징을 분할하는데 응용되었다. 오차 변화를 조정하는데 Kalman 필터가 사용되었다. 자동시각 검사시스템의 실험은 프로젝터를 이용한 수작업 측정의 정확도 수준을 보여준다.

• Journal of Welding and Joining
• /
• 제13권1호
• /
• pp.115-126
• /
• 1995

Vision sensors using the optical triangulation have been widely used for automatic welding systems in various ways, but their reliability is seriously affected by presence of the arc noise. The reliability of vision sensors was analyzed with variation of the arc noise by considering the reflectance of the base metal. first, the properties of the base metal's reflection were modelled by using the Bidirectional Reflectance-Distribution Function(BRDF), and then the variation of the reflected arc intensity was formulated for various configurations of the torch, base metal, and sensor. The experimental data of the gray level of the reflected arc light were obtained for two materials, mild steel and stainless steel. It was found that the results calculated from the proposed model were in good agreement with the experimental data.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.451-454
• /
• 2002

In this paper, a low-noise amplifier is designed and fabricated using the HJFET for the reception of the Ku-band satellite broadcast signals. The optimum input and output reflection coefficients of each amplifier stage are obtained by the trade-off between the stable gain and the noise figure circle. The amplifier performance is simulated and optimized using a microwave CAD software. The designed amplifier is fabricated and tested. Results of the test show a gain of 17.0 dB, a gain flatness of less than $\pm$2.BdB, the noise figure of less than 1.0 dB, and the input and output reflection coefficient of less than -10 dB.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.424-425
• /
• 2007

Anti-Reflection and High-reflection coating on the facet of semiconductor laser diode. To prevent internal feedback from both facets for realizing super luminescent diode and reducing the reflection-induced intensity noise of laser diode. Anti-Reflection coating Film was designed by Macleod Simulator. Coating Materials were decided $Ti_3O_5$ and $SiO_2$. Thickness of Coating layer $Ti_3O_5/SiO_2$ were 105[nm], 165[nm]. In the study Anti-Reflection coating Film was design for Laser diode and deposited by Ion-Assisted Deposition system. Then manufactured thin film measured electrical properties(L-I-V, Se, Resistor) and Optical properties(wavelength FFP). Slop-efficiency and FFP characteristic is 0.302[W/A], $22.3^{\circ}$(Horizontal), $24.4^{\circ}$(Vertical).

• 전자공학회논문지A
• /
• 제30A권3호
• /
• pp.95-103
• /
• 1993

A noise simulation software is developed to estimate crosstalk and reflection noise in multi-layer printed circuit boards having upto 20 layers and carrying signals of 100 MHz range. The simulation software can handle up to 1000 nets yielding accurate noise value associated with each net. The calculation results can be used to build optimal printed citcuit boards used in high speed computers and telecommunication equipments.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.311-316
• /
• 2008

It is needed to assess the impact of the road traffic noise for city planning. In Korea, the current noise impact assessment h3s not yet considered the impacts of the multiple reflection, the deflection and the ground attenuation caused by buildings and other obstacles. A noise map is useful tool to solve this problems. But before everything else, suitability of noise map must be assessed for variety of geometry conditions. In this study, we assessed suitability of road traffic noise map by compared measured noise levels with predicted noise levels from each road traffic noise map for Site A, B and C.