• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.4
• /
• pp.465-472
• /
• 2008

An automotive windshield wiper system is modeled mainly for vibration analysis purpose. The model is composed of solid links, ideal joints, imperfect joints to simulate unavoidable manufacturing defects and bushings having stiffness, contact between a wiper blade and a wind screen glass, friction, a spring and an actuator. Main stream of wiper dynamics analysis has been obtaining a closed form of system of equations using Newton's or Lagrange's formula and doing a numerical simulation study to understand and predict the behavior of it. However, the modeling process is complex since a wiper system is of multibody and a contact problem occurs. When imperfection, such as dead zone of a joint and stiffness of a rubber bushing, should be included, the added complexity makes the modeling difficult. Since the imperfection is understood as main cause of problematic vibration, the dynamics model of a wiper system aiming vibration analysis should include such unavoidable manufacturing defects in the model. An open form of dynamic model of a automotive windshield wiper system with imperfect joints using a commercial software is obtained and a simulation analyssis is conducted for vibration reduction study.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.12
• /
• pp.1042-1047
• /
• 2003

The goal of this research is to implement a PC-based remote control system of ion implanter using Visual Basic programming. Presently, skilled process engineers are required to regularly setup and adjust implanter parameters. Any reduction in the number of production hours devoted to ion beam implanter setup or recalibration after a species change would represent substantial improvements in both manpower and equipment utilization. An optical communication system for the remote control and telemetry in the operation of the 50kev potential was designed and constructed. This system enables continuous and safe operation of the ion implanter and can be the basis for the automation. The isolation characteristics of optical fiber were 10kV/cm, and performance tests of the system under the intense noise environment during the implanter operations showed satisfactory results. This system is designed to completely replace the existing human-machine interface with many new functions. This paper describes the important components of the system including system architecture and software development. It is expected that this system can be used for the communication and control purpose in the high noise environments such as the operation of the MeV energy implanter or other high power, high noise systems.

• Steel and Composite Structures
• /
• v.50 no.3
• /
• pp.347-362
• /
• 2024

Controlling vibrations and noise in steel box girders is important for reducing noise pollution and avoiding discomfort to residents of dwellings along bridges. The fundamental approach to solving this problem involves first identifying the main path of transmission of the vibration energy and then cutting it off by using targeted measures. However, this requires an investigation of the characteristics of flow of vibration energy in the steel box girder, whereas most studies in the area have focused on analyzing its single-point frequency response and overall vibrations. To solve this problem, this study examines the transmission of vibrations through the segments of a steel box girder when it is subjected to harmonic loads through structural intensity analysis based on standard finite element software and a post-processing code created by the authors. We identified several frequencies that dominated the vibrations of the steel box girder as well as the factors that influenced their emergence. We also assessed the contributions of a variety of vibrational waves to power flow, and the results showed that bending waves were dominant in the top plate and in-plane waves in the vertical plate of the girder. Finally, we analyzed the effects of commonly used stiffened structures and steel-concrete composite structures on the flow of vibration energy in the girder, and verified their positive impacts on energy regionalization. In addition to providing an efficient tool for the relevant analyses, the work here informs research on optimizing steel box girders to reduce vibrations and noise in them.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.5
• /
• pp.507-515
• /
• 2004

With the advent of fast power devices, the high dv/dt voltage produced by PWM inverts have been found to cause EMI noise, shaft voltage and bearing current. This paper describes the application of newly developed Conducted EMI reduction SVPWM technique in induction motor drives. The newly developed common mode voltage reduction SVPWM technique don't use any zero-vector states for inverter control, hence it can restrict the common mode voltage more than conventional PWM technique. The validity of the proposed technique by software approach is verified through simulation and experimental results.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.1
• /
• pp.123-134
• /
• 1992

The reduction of the airborne noise level is essential to the comfortability for mien and passengers in ships. In this paper, the acoustic characteristics on the multilayered acoustic panel with the Helmholtz resonator was described analytically and experimentally. The design software based on the Transfer Matrix Analysis(TMA) method for the acoustic enclosing panel was developed. According to the change of the design parameters of the panel, verious transmission losses were obtained using the developed software. As a result, it was verified that the acoustic characteristics of the composite panel was excellent in comparison with the conventional acoustic partitioning structures. This panel can be applicable to the acoustic enclosure system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.1
• /
• pp.123-130
• /
• 1988

Two kinds of 16bit-personal computer-based fatigue testing automation and monitoring system were constructed; one is Single-System utilizing a personal computer, the other si Dual-System consisting of two personal computers. The system developed in this study permits to perform multi-step programmed loading and pseudo-random loading fatigue tests, three parameters such as load, total displacement and subtracted displacement can be measured simultaneously. For improvements in measurements of fatigue behavior, two kinds of signal noise reduction software was developed. In addition, a software was also designed to automatically measure the crack opening point and crack length using the unloading elastic compliance technique.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.4 s.97
• /
• pp.404-411
• /
• 2005

To increase accurateness and reliability of the evaluation of power tool vibration transmitted to an operator, it is necessary to measure the grip and feed forces during the measurement of hand-transmitted vibration. In the study a system was invented to measure the vibration and the grip and/or feed force, which consists of a measurement handle and a PC with a data acquisition system and the corresponding software. Strain gauges and an accelerometer were mounted on the handle surface for the simultaneous measurement of the forces and the vibration. The program in the system makes it possible to monitor the grip and feed force during the tool operation so that the operator keeps the applying forces within the pre-determined range. Investigating the vibration total values, frequency-weighted root-mean-square accelerations at the handle, obtained in repetition for each power tool with control of the grip and feed force showed more consistency than those measured without force control. By using the system the experimenter can reduce random error of the measured vibration.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.7
• /
• pp.695-702
• /
• 2010

This paper presents an image alignment algorithm for application of AOI (Automatic Optical Inspection) based on SIFT. Since the correspondences result using SIFT descriptor have many wrong points for aligning, this paper modified and classified those points by five measures called the CCFMR (Cascade Classifier for False Matching Reduction) After reduced the false matching, rotation and translation are estimated by point selection method. Experimental results show that the proposed method has fewer fail matching in comparison to commercial software MIL 8.0, and specially, less than twice with the well-controlled environment’s data sets (such as AOI system). The rotation and translation accuracy is robust than MIL in the noise data sets, but the errors are higher than in a rotation variation data sets although that also meaningful result in the practical system. In addition to, the computational time consumed by the proposed method is four times shorter than that by MIL which increases linearly according to noise.

• Computers and Concrete
• /
• v.27 no.1
• /
• pp.29-39
• /
• 2021

This study aimed to develop a method for the determination of the damaged story in reinforced concrete (RC) structure with ambient vibrations, based on modified jerk energy methodology. The damage was taken as a localized reduction in the stiffness of the structural member. For loading, random white noise excitation was used, and dynamic responses from the finite element model (FEM) of 4 story RC shear frame were extracted at nodal points. The data thus obtained from the structure was used in the damage detection and localization algorithm. In the structure, two damage configurations have been introduced. In the first configuration, damage to the structure was artificially caused by a local reduction in the modulus of elasticity. In the second configuration, the damage was caused, using the Elcentro1940 and Kashmir2005 earthquakes in real-time history. The damage was successfully detected if the frequency drop was greater than 5% and the mode shape correlation remained less than 0.8. The results of the damage were also compared to the performance criteria developed in the Seismostruct software. It is demonstrated that the proposed algorithm has effectively detected the existence of the damage and can locate the damaged story for multiple damage scenarios in the RC structure.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.2
• /
• pp.375-382
• /
• 2001

In this study, an adapted Turbo Coding Algorithm for reducing communication error of a fire detection system for marine vessels, especially image transmission via power lone. Because it is necessary that this system communicate larger and faster than previous method, this study carried out enhancement a decoding speed by adaptation CRC with Turbo Code Algorithm, improvement of metric method, and reduction of decoding delay by using of Center-to-Top method. And the results are as follows: (1) Confirmed that a Turbo Code is so useful methods for reducing communication error in lots of noise environments. (2)Proposed technology in this study speed increasing method of Turbo Coding Algorithm proves 2 times faster than normal Turbo Code and communication error reducing as well in the board made by VHDL software & chips ALTERA company.