• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.9 s.114
• /
• pp.971-981
• /
• 2006

This paper presents the design and characterization of a novel fiber optical coupler for intensity modulated fiber optical microphone. Theoretical equations for the optical power coupling are presented in detail including optical path analysis and misalignment. Various optical couplers are simulated and manufactured. A multi-mode to multi-mode coupler is characterized by static and dynamic movements of mirror on a well designed experimental stage.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1521-1527
• /
• 2000

A micromirror actuated by piezoelectric unimorph cantilevers is proposed as a tine-tracking device for high-density optical data storage. Bending motions of the metal/PZT/metal unimorphs translate an integrated micromirror along the out-of-plane vertical direction. The micromirror alters the optical path of the incident laser beam and linearly steers the reflected laser beam by its out-of-plane parallel actuation. Numerical analysis shows that the actuated micromirror can satisfy the tracking speed imposed by the requirement on the access time for the high-density optical data storage up to few tens Gbitlin2 owing to the light mass of the micromirror. In this paper, preliminary characteristics of the micro-machined PZT actuated micromirror (PAM) are reported. Only a 360 nm-thick PZT film deposited by sol-gel process shows both good electrical and mechanical characteristics for the fine-tracking actuator. The micromirror can be easily actuated up to several micrometers under low voltage operation condition well below 10 volts.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.349-349
• /
• 2010

전달 경로 해석 기법은 NVH 문제 해결 프로세스에서 자주 사용되는 기법으로서 소음원 X 전달 경로= 응답 모델을 사용한 접근방식입니다. 수음(응답)점에서 문제의 진동 및 소음 응답을 고체 및 공기 음원이 응답에 미치는 기여도 또는 개별 경로, 모드, 판넬 기여도의 합으로 세분화하여 표시함으로써, 문제의 원인을 규명하고, 문제 해결 및 대책 방안에 대한 통찰력을 제시하며, NVH 문제의 해결을 위해 사용되는 필수적인 도구입니다. 본 강좌에서는 건물에 설치되는 설비의 작동 시 고체 음원 평가 및 철도 소음의 공기음과 구조음 기여도 평가를 위해 적용된 전달 경로 해석 기법 사례를 소개할 것입니다. 설비 작동시의 전달 경로 해석 기법에 의해 평가된 고체 음원의 신뢰성 확보를 위하여 $\bullet$ 직접 측정된 하중 데이터와 역행렬 기법에 의해 예측된 하중 비교 및 $\bullet$ 가진 햄머로 가진시의 가진력과 측정된 가속도 신호를 사용하여 역행렬 기법으로 계산된 하중의 비교를 수행하였습니다. 철도 소음의 공기음 및 고체음 기여도 평가를 위해서는 $\bullet$ 열차 주행중 철로에서 측정된 가속도를 사용하여 철로면에 가해지는 하중을 역행렬 기법으로 계산하였으며 $\bullet$ 철로 주변에서 거리별 측정된 소음중, 고체음의 기여도 파악을 위해서, 전달 경로 해석기법으로 예측된 고체음과 측정된 소음을 비교하였습니다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.5
• /
• pp.569-576
• /
• 2014

There were overwhelming high-frequency electromagnetic noises in 200kW-class hybrid electric vehicle(HEV) although EMC control strategy had been applied to cope with the electromagnetic noises during the development of HEV. This paper investigates the characteristics of the conducted and radiated emission noises, the source and path of noises, and the effects of EMI on the electronics. Finally the design concept of noise control is proposed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.660-664
• /
• 2014

A diesel forklift truck under 3-ton class has disadvantages in the vibration transmission path. Because the weight ratio of body structure to powertrain which is source of excitation force is lower th an a mid-class forklift. In addition, the torsional and bending vibration mode frequencies of body structure are within the engine excitation frequency range, then high idle vibration generated by resonance. In this paper vehicle body structure design and optimization technique considering idle vibration reduction are presented. Design sensitivity analysis is applied to search the sensitive of design parameters in body structure. The design parameters such as thickness and pillar cross section were optimized to increase the torsional and bending vibration mode frequencies.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.4
• /
• pp.34-39
• /
• 1999

In this paper, boundary extraction algorithm is suggested by removing boundary noises efficiently and simplifying object shape in binary image. To remove boundary noises, $2{times}2$ mask boundary extraction algorithm is modified . Proposed method is designed to generate a symmetric path for the parasitic branch noise and to analysis traced features on end point of noise. It can extract more simplified object boundary but preserve original object shape by combining white background color extraction result with foreground extraction result. The usefulness of the proposed method was proved through experiments with various binary images.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.559-563
• /
• 2005

The wafer positioning robot used in the semiconductor industry is required to operate at high speed for the improvement of productivity. However, the residual vibration produced by the high speed of the wafer positioning robot makes the life of the robot shorter and the cycle time longer. In this study, the input shaping and the path of the system are designed for the reduction of the residual vibration and the optimization of the cycle time. The followings are the process for the reduction and the optimization; 1)System modeling of wafer positioning robot, 2)Verification of dynamic characteristic of wafer positioning robot, 3)Input shaping plan using impulse response reiteration, 4)Simulation test using simulink, 6)Analysis of result.

• Journal of Advanced Information Technology and Convergence
• /
• v.8 no.2
• /
• pp.147-157
• /
• 2018

In this study, we analyzed an outdoor visible light communication system and implemented it through a simulation. We designed a Reed-Solomon encoder, a variable interleaver structure, and set it to the Institute of Electrical and Electronics Engineers (IEEE) 802.15.7 PHY I specification mode. We also analyzed the performance of an additive white gaussian noise (AWGN) channel environment using a root-raised-cosine (RRC) filter, implemented a MATLAB simulation and analyzed its performance. The results showed a requirement for an additional signal-to-noise ratio (SNR) of approximately 1.5 dB in a 3-ray multipath visible light channel environment than in an AWGN environment.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.2 no.2
• /
• pp.53-62
• /
• 2002

The purpose of this study is to construct the database and to analyze the space and to suggest the possibility of application for architectural planning and design through the approach analysis for educational facilities with the use of the GIS. The properties of the space is to be expressed by optimized path from the analysis of the user and the traffic situation. Analyzed with other site analysis factors(situation, view, noise, configuration of the earth, etc.), the total site analysis is to be made and it is also to be a decision making support system.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.2
• /
• pp.117-124
• /
• 2015

Recently, noise reduction in room air conditioner has been one of the most important issues as well as cooling efficiency. A rotary compressor is widely used in room air conditioners. But, the rotary compressor is the dominant vibration/noise source in an air conditioner. A number of studies have been conducted on reducing rotary compressor vibration/noise through improving muffler and resonator design. However, a noise delivering path between compressor and pipe is not fully taken into consideration. In this paper, the vibration analysis model of rotary compressor is modeled using RecurDyn and experimental validation is presented.